• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.2
• /
• pp.10-23
• /
• 2000

The purpose of this research was to investigate water spaces such as marshes and watercourses, especially focusing on methods to establish eco-ponds. Many aqua-ecosystems have been filled up or destroyed in the process of rapid industrialization and urbanization in the cities. This inquiry was done by comparing, studying and analyzing existing ponds and studying documents on the introduction and methods of making eco-ponds. Existing ponds were put into three categories as the either eco-pond, man-made/natural ponds, or man-made ponds. Three instances were selected for each category, totaling nine. Data on the size and shape, depth, waterproofing techniques, water supply, plants and planting plan, and the maintenance of the ponds was collected and compared. The following are conclusions based on comparing, studying and analyzing these existing ponds, and studying documents on the introduction and methods of making eco-ponds. ${\cdot}$ It is noteworthy that different environments and depths must be provided because these are main variants contributing to attracting plants in the ponds. ${\cdot}$ In these places plants emerged, such as, floating-leaved plants, free-floating planktonic plants, submerged plant etc, in the different water level zones, once these various conditions were provided. ${\cdot}$ Various spaces can be used for shelter, places for relaxation and habitation. ${\cdot}$ After establishing a pond, routine maintenance is necessary for preventing eutrophication. However the minimal possible management should be done to maintain a natural status.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.4
• /
• pp.21-33
• /
• 2013

The purpose of the study is to evaluate engineering properties of Ferro Nickel Slag (FNS) and to investigate the effects of FNS on potential contamination of surrounding soil and water through small and large chamber tests. Soil conditions in the chamber tests were made as closely as possibile to the field conditions. In order to simulate different types of water, we used fresh water, acidic water and seawater. Sand soils were made with relative densities of 40% and 60%, and clay with the degree of compaction of 90%. After flushing water through the FNS in the chambers was completed, the PH test was performed for the water flowing out of the chambers and the soil samples were collected for soil pollution analysis. Based on the results of the chamber tests, although the pollution level was slightly higher in the silt than in the sand, the environmental effect that FNS causes the surrounding soil was found to be very minimal. This indicates that FNS can be used as construction material in place of natural aggregates.

• Journal of the Korean housing association
• /
• v.13 no.5
• /
• pp.77-88
• /
• 2002

This article deals the investigations how to solve the social deficiencies of deteriorate apartments, which is a half cycle of a building and it goes slum clearance and redevelopment. And this proposes an active remodeling and design strategy, management, and housing policies for extending the usage of the resource. Most of apartment housing in Korea is built by the panel wall and slab structure system fur economic price. To remake is possible, even though not designed in flexibility and variation. The remodeling strategies are dwelling unification, transformation of two units to one or three units, addition of a room, changing into commercial and community required spaces, and reshaping of a envelop and facade by addition of a dwelling or dwellings, roof floors, change of materials and colors, and so on. And, all activities in structural aspect are proposed removal in upper part and addition in lower part of an apartment housing. Active remodeling cost a great deal compare to new construction, so any remodeling activities should be based on a minimal interfere and budgets to enhancing the quality in existing building. The final aim of an active remodeling is to enhance the quality in economic values, and to keep original state and to put on the new one in a small part. To promote the active and careful management and rehabilitation, it is necessary to give the positive incentive in terms of architectural law, bank loan, and any redevelopment project should get the remodeling record in national resources.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.105-110
• /
• 2001

Autoclave curing using the vacuum bagging method is widely used for the manufacture of advanced composite prepreg airframe structures. Due to increasing use of advanced composites, specific techniques have been developed to repair damaged composite structures. In order to repair the damaged part, it is required that the damaged areas be removed, such as skin and/or honeycomb core, by utilizing the proper method and then repairing the area by laying up prepreg (and core) then curing under vacuum using the vacuum bagging materials. It shall be cured either in an oven or autoclave per the original specification requirements. Delamination can be observed in the sound areas during and/or after a couple times exposure to the elevated curing temperature due to the repeated repair condition. This study was conducted for checking the degree of degradation of properties of the cured parts and delamination between skin prepreg and honeycomb core. Specimens with glass honeycomb sandwich construction and glass/epoxy prepreg were prepared. The specimens were cured 1 to 5 times at $260^{circ}F$ in an autoclave and each additionally exposed 50, 100 and 150 hours in the $260^{circ}F$ oven. Each specimen was tested for tensile strength, compressive strength, flatwise tensile strength and interlaminar shear strength. To monitor the characteristics of the resin itself, the cured resin was tested using DMA and DSC. As a results, the decrease of Tg value were observed in the specific specimen which is exposed over 50 hrs at $260^{circ}F$. This means the change or degradative of resin properties is also related to the decrease of flatwise tensile properties. Accordingly, minimal exposure on the curing temperature is recommended for parts in order to prevent the delation and maintain the better condition.

• Journal of Environmental Impact Assessment
• /
• v.12 no.3
• /
• pp.137-150
• /
• 2003

This study aims to survey whether local governments have legislated laws and regulations on environment impact assessment system, to compare and analyze specific projects and their scale, assessment items, and procedures & discussion process, to identify issues and generate improvement plans, and to suggest a direction for future legislation to local governments that plan to legislate laws and regulations in the future. Major outcome of the study are as follows. First, terminologies used for environment impact assessment by local governments need to be unified. Also, laws and regulations need to be legislated soon. Second, in "urban development project" areas, a total of nine project areas including "quarrying of soil and stone, sand, gravel, and minerals" was essential common projects. A total of six project types were added or newly established compared to national systems. Among them, four project types were added within national-level project areas and two project types were not available under the national-level project areas and newly added due to the nature of local governments. Third, in terms of project scale, scale enhancement of "urban development project" was most common. Analysis showed that in case of clean natural environment such as Cheju Island, it is necessary to consider reinforcing project areas where development activities take place directly in forests or rivers such as "industrial base and complex development", "water resource development", and "development of tourism complex." Fourth, the discussion and review procedures of assessment reports were similar to those at government level. However, in case of Seoul city, it is required to write a "preparation plan" before drafting an assessment report. The city features partial introduction of scoping and screening, which allows to exempt discussion procedures if impact on environment is found to be minimal after drafting the assessment report. In case of national-level, it has a dual system that is split between Ministry of Construction and Transportation and Ministry of Environment. However, in case of environment impact assessment of local governments, it is a single system where city mayors and provincial governors are in charge of both project execution and environmental assessment. Therefore, the most important task is how to satisfy objectiveness and accountability.

• Korean Institute of Interior Design Journal
• /
• no.13
• /
• pp.150-160
• /
• 1997

The tendency of the Minimalism in the contemporary a architecture is based on Mies van der Rohe s saying ‘나SS IS m more" as the principle of the Minimal art and its formative c composition. It can be divided into technical Minimalism p prevailed in Northern Europe and the zone of German l language, and the regional one in Southern Europe and S Southern America. The former is interested in the experiences of the techniques and materials, and the latter in that of the s space and the place through the simple forms. The minialistic approach to the architecture is nat only m methodological one. It accepts the concept and the construction of architecture as 2 axes for making it keeps the tradition and c communication with the master builder, the materials, and i염 m means to compound. The expressive characteristics of works in M Minimalism are 1) as the formal issue, it is simple, self-referring. without any symbol or any allusion, and compounds the r repetitive forms as the comceptual aspec않 of architecture, 2) it h has the characteristies such as the approach directly to the m means by which architecture made, the critical interests to the m material attributes, and the capacity to the contemporary t technology as the issue of technique and materials, 3) regarding t the space and the place, it shows the good sense to the site in t the sphere intervention of architecture 1e Maininlalism architecture has i않 impotance in the point t that it seeks to the qualities immanent in architecture by s showing the marvelous status through discovering the i immanent properties of the site, program materials, and the s structure, and also it begins new way of interpreting a architecture with new viewpoint to the its essence as well as a architecture itself.self.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.1
• /
• pp.45-53
• /
• 2010

We have developed an efficient and precise method for genome manipulations in Bacillus subtilis that allows rapid alteration of a gene sequence or multiple gene sequences without altering the chromosome in any other way. In our approach, the Escherichia coli toxin gene mazF, which was used as a counter-selectable marker, was placed under the control of a xylose-inducible expression system and associated with an antibiotic resistance gene to create a "mazF-cassette". A polymerase chain reaction (PCR)-generated fragment, consisting of two homology regions joined to the mazF-cassette, was integrated into the chromosome at the target locus by homologous recombination, using positive selection for antibiotic resistance. Then, the excision of the mazF-cassette from the chromosome by a single-crossover event between two short directly repeated (DR) sequences, included in the design of the PCR products, was achieved by counter-selection of mazF. We used this method efficiently and precisely to deliver a point mutation, to inactivate a specific gene, to delete a large genomic region, and to generate the in-frame deletion with minimal polar effects in the same background.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.4
• /
• pp.10-17
• /
• 2006

Laboratory-scale two-dimensional aquifer physical model studies were conducted to assess the effect of air injection rate and air injection pattern on the removal of disel contaminated soil and groundwater by air/bio-sparging. The experimental results were represented that the optimal conditions in this experiment were as air injection rate of 1,000 ml/min and pulsed air injection pattern(15 min on/off). The results of the TPH reduction, DO consumption and $CO_2$ production indicate the effective biodegradation evidence of diesel. Based on our results, The minimal $O_2$ supply and pulsed air injection pattern could effectively enhance the diesel removal and the pulsing air injection had effect on oxygenation in this system. Thus, the cost of operating air/bio-sparging system will be reduced if optimal air injection rate and pulsed air injection pattern are applied to remediate contaminants.

• Korean Journal of Ecology and Environment
• /
• v.40 no.4
• /
• pp.527-536
• /
• 2007

In this study, we applied 10-metric health assessment model, based on the Index of Biological Integrity (IBI) during 2006 in the Changwon Stream, which is located in the Changwon city, Gyeongnam province, S. Korea, and then compared with water quality data. The Index of Biological Integrity (IBI) in the Changwon Stream varied from 18 to 38 in the watershed depending on the sampling location and averaged 30.3 (n=6) during the study. Analysis of tolerance guilds showed that the proportion of sensitive species was 13%, but tolerant and intermediate species were 34% and 53%, respectively. Qualitative Habitat Evaluation Index (QHEI) averaged 43.3 (range: 65-104, n=6) indicating non-supporting condition, based on the criteria of U.S. EPA (1993). Values of QHEI showed a typical longitudinal decreases from the headwater reach to the downstream location, except for Site 1 with a low QHEI value by artificial habitat by concrete construction. Minimum QHEI was found in Site 4 where fish diversity was minimal. Conductivity increased continuously along the gradients and especially showed abrupt increases in the downstream sites along with turbidity. Stream ecosystem health of IBI matched to the values of QHEI except for S6. Low IBI values in the sites 4 and 5 was considered to be a result of combined effects of chemical pollutions and habitat degradations. Our results support the hypotheses of Plafkin et ai. (1989) that physical habitat quality directly influences the trophic structure and species richness, and is closely associated with IBI values.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.22-29
• /
• 2013

The platform safety door is difficult to install in platform because the doors of railway vehicles and existing Passenger Safety doors should be alined. To be able to solve this problem, we propose the use of Rope Type Platform Safe Door (RPSD) which is a vertically retractable platform that is designed to close from top to bottom. This platform has installed safety gate pillars at intervals of 20-40 m which accommodates different types of train regardless of train length, gate opening and location. In this paper, we reviewed the application of existing PSD and RPSD in various train stops in Seoul Gyeongbu Line platform. The results of the review showed that the existing PSD may cause problem in construction, safety and cost efficiency. The use of RPSD however shows that minimal problems will be encountered.