• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.769-776
• /
• 2002

본 논문에서는 균일한 슬롯 폭을 갖는 5 GHz 대역 보우타이 형태의 미앤더 슬롯 안테나를 제안한다. 보우타이 슬롯안테나는 광대역 특성을 갖는 반면 크기가 크다는 단점이 있고, 미앤더 슬롯 안테나는 소형이지만 대역폭이 좁다. 그러므로 광대역 특성을 갖는 소형 안테나의 개발을 위하여, 일반적인 형태의 미앤더 슬롯을 보우타이 형태로 변화시켰다. 모의실험결과, 제안된 안테나는 같은 슬롯 폭과 슬롯 길이를 갖는 미앤더 슬롯 안테나보다는 대역폭이 3배정도 넓고, 같은 크기를 갖는 보우타이 슬롯 안테나보다는 공진 주파수가 3.01 GHz낮아짐을 볼 수 있었으며, 측정결과, 제안된 안테나는 소형이지만, 대역폭이 218 MHz(5.142 GHZ - 5.360 GHz)로써 원하는 동작 주파수(5.15 GHz - 5.35 GHz)를 만족한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.149-156
• /
• 2012

본 논문에서는 기존의 PACD (Periodically Arrayed Capacitive Devices) 선로구조가 가지는 고 손실 특성의 문제점을 개선하기 위하여, 단파장 특성이 있는 Inverted PACD 구조를 제안하였다. Inverted PACD 선로구조의 손실특성은 종래의 PACD 구조와 비교하여 훨씬 개선되었으며, 구체적으로 ${\lambda}$/4의 길이를 가지는 Inverted PACD 선로구조의 손실특성은 4GHz에서 0.41dB이다. 그리고 상기 Inverted PACD 선로구조는 종래의 마이크로스트립 선로보다 단파장 특성을 보여주었으며, 구체적으로 종래의 전송선로 파장의 11.85%로 파장이 대폭 축소되었다. MMIC용 초소형 수동소자로서의 응용가능성을 제시하기 위하여, Inverted PACD 선로구조를 이용하여 GaAs MMIC상에 임피던스 변환기를 제작 및 측정하였다. 그 결과 Inverted PACD 선로구조를 이용하여 제작한 임피던스 변환기의 크기는 0.012 $mm^2$이며, 종래의 임피던스 변환기 크기의 1.7%의 면적을 차지하였다. 상기 임피던스 변환기는 2.25~6.5GHz 대역에서 -10dB 이하 반사손실과 -1dB이하의 삽입손실 등 양호한 RF 특성을 보여주었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.535-538
• /
• 2000

There are several electricity applied sterilizers such as sterilizer with high frequency sterilizer with ozone sterilizer with high voltage and so on Those sterilizers feature "because there is no chemical process there is no secondly environmental pollution" At the power conversion part ZVS and ZCS methods have been used that it results in reduced switching loss miniaturized size and lightened weight, Besides the current in the device is smaller than that of existing method. Thus it is expected that the cost of sterilization process when quality of the device is measured by power consumption will be reduced.e reduced.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.246-249
• /
• 2002

In this paper, a rectangular patch antenna is miniaturized by changing tile middle of patch into narrow microstrip line except the edges of the patch where the fringing field occurs. Miniaturizing rate, gain, radiation patterns of suggested antennas were compared with general square microstrip antenna by using simulator Ensemble. As a result, it reduces the size of antenna by 30% and improves the characteristic of X pol as a advantage while it reduces gain and bandwidth.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.237-240
• /
• 2001

There are several electricity applied sterilizers such as sterilizer with high frequency, sterilizer with ozone, sterilizer with high voltage, and so on. Those sterilizers feature “because there is no chemical process, there is no secondly environmental pollution” At the power conversion part, AVS and ZCS methods have been used that it results in reduced switching loss, miniaturized size, and lightened weight. Besides, the current in the device is smaller than that of existing method. Thus, it is expected that the cost of sterilization process, when quality of the device is measured by power consumption, will be reduced.

• 반도체디스플레이기술학회지
• /
• 제2권3호
• /
• pp.1-6
• /
• 2003

In the rapid changes of the semiconductor manufacturing technologies for early 21st century, it may be safely said that a kernel of terms is the size increase of Si wafer and the size decrease of semiconductor devices. As the size of Si wafers increases and semiconductor device is miniaturized, the units of cleaning processes increase. A present cleaning technology is based upon RCA cleaning which consumes vast chemicals and ultra pure water (UPW) and is the high temperature process. Therefore, this technology gives rise to environmental issue. To resolve this matter, candidates of advanced cleaning processes have been studied. One of them is to apply the electrolyzed water. In this work, electrolyzed water cleaning was compared with various chemical cleaning, using Si wafer surfaces by changing cleaning temperature and cleaning time, and especially, concentrating upon the contact angle. It was observed that contact angle on surface treated with Electrolyzed water cleaning was $4.4^{\circ}$ without RCA cleaning. Amine series additive of high pKa (negative logarithm of the acidity constant) was used to observe the property changes of cathode water.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.995-999
• /
• 2014

In this paper, a new size-reduction approach for branch-line coupler is introduced which uses parallel end-shorted coupled lines with lumped capacitors. The characteristic of the new design was analyzed using even-odd mode method, and simulated on HFSS before fabricated on the FR4 epoxy glass cloth copper-clad plat (CCL) PCB substrate at center frequency of 1 GHz. The electrical length of transmission line was reduced to 15 degrees, therefore the size of branch-line coupler was largely reduced approximately maintaining the same characteristic around the stable center frequency. The insertion loss of the branch-line coupler filter was -4.39 dB. The size of the overall hybrid is $20mm{\times}20mm$. Measurements results were well agreed with the simulated ones.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.15-20
• /
• 1997

Waveguide bandpass filters using E-plane or H-plane discontinuities have been used in many satellite communication systems. Since the transmitter and receiver of such systems tend to be getting smaller, components such as bandpass filters must also be reduced in size. In this paper, in order to reduce the waveguide, itself, of which bandpass filters consist, double plane step waveguide discontinuities are considered. They are analyzed using the mode matching method and the genralized scattering parameter of the cascaded structure is calculated. The characteristics of the bandpass filter which is designed using the reduced size waveguide is optimized by OSA90$^{TM}$. The bandpass filter has a good characteristics and smaller size than those made of the E-plane or H-plane step discontinuities.s.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.197-201
• /
• 2006

Folded lines are applied to design a compact microstrip ring hybrid. Using the proposed structure we achieve both significant size reduction and good harmonic suppression with the same results of conventional ring hybrid at 2.41GHz. Including the third harmonic frequency, up to 11GHz band harmonics are suppressed to -20dB. The size of the proposed ring-hybrid is reduced to one forth of the conventional ring hybrid. The measured frequency responses agree well with simulated ones.

• Journal of electromagnetic engineering and science
• /
• 제8권1호
• /
• pp.12-16
• /
• 2008

In this paper, we introduce a coupling, which is achieved through the aperture instead of the conventional edge coupling, so that the bandpass filter is reduced less than half in size compared to conventional planar type. The resulting filter configuration has a near two-fold symmetry, where the aperture coupling is used in the middle of the coupling stages. We designed a bandpass filter using two tapped hairpin resonators, of which the order becomes four. The designed bandpass filter has the size of $8.9{\times}18.3\;mm$. It has the return loss better than 17dB and the insertion loss of less than 5 dB in overall passband. The measured results show good agreements with simulated ones.