• 제목/요약/키워드: Miniature pressure

검색결과 61건 처리시간 0.03초

개에서 소리공포증에 의해 발생한 상대적 적혈구증가증 증례 (Noise Phobia-Induced Relative Polycythemia in a Dog)

  • 강민희;박희명
    • 한국임상수의학회지
    • /
    • 제29권6호
    • /
    • pp.494-497
    • /
    • 2012
  • 6년령의 수컷 미니어쳐 핀셔견이 천둥소리로 인한 떨림, 빈호흡 및 부적절한 배뇨를 주증으로 내원하였다. 환축은 2년전 발생한 교통사고 이후 큰 소리에 공포감을 가지게 되었으며, 이는 천둥 발생이 잦은 지난 3개월간 지속적으로 나빠졌다. 기본 신체검사에서 미열, 빈호흡, 빈맥과 함께 혈압의 상승이 확인되었다. 실험실 검사에서 동맥혈의 산소포화도 감소와 함께 적혈구증가증이 확인되었다. 병력, 신체검사 및 실험실적 검사를 바탕으로 본 환축은 소리공포증과 함께 발생한 상대적 적혈구증가증으로 진단 되었다. 증상의 완화를 위하여, 행동교정 및 탈감각화, 반대조건화, 그리고 약물치료가 시작되었다. 다른 치료들과 함께 음악치료도 병행되었으며, 치료기간 중 임상증상 및 적혈구증가증이 개선되었다. 따라서, 본 증례는 소리공포증과 같은 만성적인 스트레스에 의하여 발생한 상대적 적혈구증가증의 진단증례 보고 이다.

염처리가 수도잎의 신장 및 광합성능에 미치는 영향 (Effects of Salinity on Leaf Growth and Photosynthesis in Rice)

  • Lee, Kang-Sae
    • 한국작물학회지
    • /
    • 제36권1호
    • /
    • pp.22-33
    • /
    • 1991
  • 간장이 다른 수도 2품종에 대하여 NaCl, KCl, Mannitol을 처리하고 잎의 신장과 광합성능의 반응을 조사하였다. 그리고 염처리에 의하여 잎의 신장이 일시적으로 정지하고 신장률이 둔화되는 현상 및 높은 농도에서 광합성능이 저하되는 원인에 대하여 고찰하였다.

  • PDF

진동대 시험을 통한 Fill Dam의 내진 안정성 평가 (Evaluation of the Seismic Stability of Fill Dam by Shaking Table Tests)

  • 윤원섭;채영수;박면규
    • 한국지반신소재학회논문집
    • /
    • 제10권4호
    • /
    • pp.81-92
    • /
    • 2011
  • 본 연구에서는 흙 댐 구조물의 지진저항 특성을 파악하기 위하여 3가지 대표단면을 기초로 하여 축소모형의 비율에 해당하는 상사법칙을 고려하여 각각 1:100, 1:70, 1:50으로 토조를 제작하였다. 그리고 국내 설계기준에 준하여 장주기인 Hachinohe파, 단주기인 Ofunato파, 인공지진파를 가진하여 각 단면에 대해 가속도변화, 과잉간극수압, 수직 및 수평변위를 측정하고, 측정된 결과를 통하여 지반-구조물-유체의 상호작용에 따른 안정성을 평가하였다. 시험결과 시험 대상 단면의 변위는 지진 시 허용변위량 300mm에 비해 비교적 작은 변위로 지진 시 안정성을 확보하였다. 가속도 계측결과 Hachinohe파, Ofunato파는 할증률 20%정도로 평가되었지만 인공지진파는 할증률 30%정도로 평가되었다. 과잉간극수압비 측정결과 액상화 평가기준인 과잉간 극수압비 1이하로 모형단면은 액상화에 대해 안정성을 확보하였다.

축소형 초고압 분사 시스템의 노즐 형상에 따른 초음속 액체 제트 분무 특성에 관한 연구 (Spray Characteristics of Supersonic Liquid Jet by a Nozzle Geometry of Miniature High-Pressure Injection System)

  • 신정환;이인철;김희동;구자예
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.177-180
    • /
    • 2010
  • 고압관, 가압관, 발사관으로 구성된 Ballistic Range의 일종인 2단식 경가스 총을 사용하여 초음속 액체 제트의 분무 특성을 연구하였다. 135 bar의 압축공기는 고압관과 가압관 사이에 OHP필름으로 구성된 격막을 파열시킨 후 가압관의 발사체를 약 250 m/s의 속도로 가속하였다. 가속된 발사체는 액체 저장부에 충돌하여 액체를 초고압으로 가압한 후 초음속으로 분사시키며, 특히 초음속 액체 제트는 미립화된 다중 제트의 형태를 나타내고 액체 제트 전방 영역에서 충격파를 수반한다. 다양한 분사 노즐의 기하학적 형상에 대한 분무시험결과 초음속 액체 제트의 속도와 충격파 각도가 각각 다르게 생성되었으며, L/d가 9.9, 11.9, 23.8의 조건에 대하여 L/d가 23.8의 경우에 액체 제트의 분사속도가 마하수 1.53으로 가장 낮게 측정되었다.

  • PDF

고압하에서 $TiH_2$의 특성화 연구 (Characteristics of $TiH_2$ under High Pressure)

  • 김영호
    • 한국광물학회지
    • /
    • 제5권2호
    • /
    • pp.72-78
    • /
    • 1992
  • 지구외핵은 순수한 철원소 이외에, 철보다 원자량이 낮은 원소가 상당량 포함되어 있다. 수소도 외핵내에 존재할 가능성이 있는 성분 중의 하나로 인식되고 있다. 따라서, 철수화물에 대한 압력에 따른 수소의 용해도에 대한 연구와 병행하여, 기타 금속수화물에 대한 연구의 확대 또한 중요하다. 수소는 또한 석유의 대체물질로써 그 가능성이 매우 높으며, 금속수화물상태로 수소를 보다 효율적으로 저장할 수 있는 설정구조에 대한 연구 역시 요구된다. 이러한 두가지 이류로, $TiH_2$를 철수화물의 결정구조적 유사물로 선택하여, 고온-고압하에서 특성화 현상을 연구하였다. 결정질 $TiH_2$ 분말시료에 대하여 두가지 다른 온도-압력 조건하에서 고온-고압실험이 시해되었다. 이러한 실험 중 하나는 소형 고온 발생장치가 부착된 피스톤-실린더 다이아몬드 앤질기기를 이용하여 압력은 최고 15 GPa 까지, 온도는 500${\circ}$에 고정시킨 상태에서 처리한 시료를 상온-상압상태로 변환시켜 X-선 회절실험을 하였다. 이러한 실험에서, 11.3 GPa 압력 이상에서 고온-고압처리한 시료로 부터 사방정계 결정구조를 보이는 비가역성의 새로운 광물상을 발견하였는데 이는 Ti수화물이 고압하에서 안정한 결정 격자구조를 보이는 새로운 것이다. 이 상변이에 따른 몰부피의 변화는 약 10%이다.

  • PDF

피복입자핵연료에서 증착조건이 탄화규소층의 특성에 미치는 영향 (Effect of Deposition Parameters on the Property of Silicon Carbide Layer in Coated Particle Nuclear Fuels)

  • 김연구;김원주;여승환;조문성
    • 한국분말재료학회지
    • /
    • 제23권5호
    • /
    • pp.384-390
    • /
    • 2016
  • Tri-isotropic (TRISO) coatings on zirconia surrogate beads are deposited using a fluidized-bed vapor deposition (FB-CVD) method. The silicon carbide layer is particularly important among the coated layers because it acts as a miniature pressure vessel and a diffusion barrier to gaseous and metallic fission products in the TRISO-coated particles. In this study, we obtain a nearly stoichiometric composition in the SiC layer coated at $1400^{\circ}C$, $1500^{\circ}C$, and $1400^{\circ}C$ with 20 vol.% methyltrichlorosilane (MTS), However, the composition of the SiC layer coated at $1300-1350^{\circ}C$ shows a difference from the stoichiometric ratio (1:1). The density decreases remarkably with decreasing SiC deposition temperature because of the nanosized pores. The high density of the SiC layer (${\geq}3.19g/cm^2$) easily obtained at $1500^{\circ}C$ and $1400^{\circ}C$ with 20 vol.% MTS did not change at an annealing temperature of $1900^{\circ}C$, simulating the reactor operating temperature. The evaluation of the mechanical properties is limited because of the inaccurate values of hardness and Young's modulus measured by the nano-indentation method.

개의 수정체 전방 탈구 8례에 대한 후향적 연구 (Retrospective Study of Anterior Lens Luxation in 8 Dogs)

  • 김세은;박신애;김원태;정만복;채제민;박영우;서강문
    • 한국임상수의학회지
    • /
    • 제25권4호
    • /
    • pp.292-294
    • /
    • 2008
  • The purpose of this study was to evaluate the cause of lens luxation and to determine the frequency of vision loss, glaucoma, cataract, and corneal edema before and after intracapsular lens extraction (ICLE). The medical records of 8 dogs underwent ICLE for the correction of anterior lens luxation at the Veterinary Medical Teaching Hospital of Seoul National University from August 2005 to September 2007 were reviewed. The most frequently affected breed was Miniature Poodle (n = 3). The mean age was $10.8{\pm}2.1$ years. Preoperatively, 5 eyes (67.5%) with anterior luxation had secondary glaucoma, 7 eyes (87.5%) had vision loss, and all eyes (100.0%) had corneal edema. Four weeks after ICLE, 6 eyes (75.0%) had normal intraocular pressure (IOP), and 4 eyes (50.0%) regained vision. Corneal edema was reduced after ICLE in all eyes, but still remained in 4 eyes. It was considered that ICLE was beneficial in the management of anterior lens luxation, but the eyes without glaucoma before ICLE had more favorable prognosis than eyes with.

정규압밀점토에서의 피에조 콘 소산시험을 이용한 수평압밀계수의 산정 (Estimation of Coefficient of Consolidation Using Piezocone Dissipation Test in Normally Consolidated Clays)

  • 임형덕;이우진;김대규
    • 한국지반공학회논문집
    • /
    • 제19권5호
    • /
    • pp.145-154
    • /
    • 2003
  • 본 연구에서는 정규압밀점토에서의 피에조 콘 소산시험시 측정된 초기 과잉간극수압을 팔면체 수직응력($\Delta{\sigma}_{oct}$)의 변화에 의해 발생하는 과잉간극수압($\Delta{u}_{oct}$)과 팔면체 전단응력($\Delta{\tau}_{oct},$)의 변화에 의해 발생하는 과잉간극수압($\Delta{u}_{shear}$)으로 구분할 수 있는 방법을 이용하여 초기 과잉간극수압 분포를 가정하고, 연속적인 구형 공동확장 이론과 축대칭 비혼합 선형 압밀이론에 근거한 유한차분법을 사용하여 과잉간극수압의 소산거동을 모사하였다. 이와 같은 방법에 의해 압밀계수를 가정하여 계산된 소산곡선이 실측된 소산곡선과 특정 소산도에서 일치하도록 반복 계산하는 시행착오법을 사용하여 압밀계수를 산정하는 방법을 제안하였다. 제안된 방법과 기존의 이론해를 루이지애나 주립대학교 모형 토조에서 수행된 소형 피에조 콘의 시험결과에 적용한 결과에 의하면 제안된 방법에 의해 산정된 압밀계수가 다른 이론해보다도 실내시험치와 유사한 것으로 나타났으며, 계측된 소산곡선과도 잘 일치하는 것으로 나타났다.

유동층 화학기상증착법을 이용하여 제조된 열분해 탄화규소의 특성에 미치는 증착온도의 영향 (Effect of Deposition Temperature on the Property of Pyrolytic SiC Fabricated by the FBCVD Method)

  • 김연구;김원주;여승환;조문성
    • 한국분말재료학회지
    • /
    • 제21권6호
    • /
    • pp.434-440
    • /
    • 2014
  • Silicon carbide(SiC) layer is particularly important tri-isotropic (TRISO) coating layers because it acts as a miniature pressure vessel and a diffusion barrier to gaseous and metallic fission products in the TRISO coated particle. The high temperature deposition of SiC layer normally performed at $1500-1650^{\circ}C$ has a negative effect on the property of IPyC layer by increasing its anisotropy. To investigate the feasibility of lower temperature SiC deposition, the influence of deposition temperature on the property of SiC layer are examined in this study. While the SiC layer coated at $1500^{\circ}C$ obtains nearly stoichiometric composition, the composition of the SiC layer coated at $1300-1400^{\circ}C$ shows discrepancy from stoichiometric ratio(1:1). $3-7{\mu}m$ grain size of SiC layer coated at $1500^{\circ}C$ is decreased to sub-micrometer (< $1{\mu}m$) $-2{\mu}m$ grain size when coated at $1400^{\circ}C$, and further decreased to nano grain size when coated at $1300-1350^{\circ}C$. Moreover, the high density of SiC layer (${\geq}3.19g/cm^3$) which is easily obtained at $1500^{\circ}C$ coating is difficult to achieve at lower temperature owing to nano size pores. the density is remarkably decreased with decreasing SiC deposition temperature.

개의 초기 원발성 녹내장안에서 Ahmed valve 이식술의 적용 (Ahmed Valve Implantation for Early Glaucoma Treatment in Dogs)

  • 박신애;정만복;박영우;김원태;김세은;서강문
    • 한국임상수의학회지
    • /
    • 제25권5호
    • /
    • pp.385-390
    • /
    • 2008
  • The purpose of this study was to compare the long term prognosis of Ahmed valve implantation and medical therapy in dogs with early primary glaucoma. The medical records of dogs with early primary glaucoma from the Veterinary Medical Teaching Hospital of Seoul National University between January 2005 and May 2008 were reviewed. Five dogs underwent Ahmed valve implantation and medical therapy was performed in six dogs. Breeds of the dogs included Shih Tzu(n = 7), American cocker spaniel(n = 2), and miniature poodle(n = 2). Adequate intraocular pressure(IOP) was better maintained in the Ahmed valve implantation group than in the medical treatment group throughout the follow-up period. Mean time for vision loss to develop after treatment in the Ahmed valve implantation group($198.0{\pm}115.4$ days) was significantly longer than that in medical treatment group($43.2{\pm}30.4$ days, p < 0.05). Post-operative complications included occlusion of the tube by fibrin in the anterior chamber (n = 1), fibrous capsule about the episcleral base of the device(n = 1), and dislocation of the valve body(n = 1). It is considered that Ahmed valve implantation is more effective strategy to control IOP and maintain vision than medical treatment in early glaucomatous dogs.