• Korean Journal of Veterinary Research
• /
• v.51 no.4
• /
• pp.315-318
• /
• 2011

A dog (5.6 kg, 4-year-old, castrated male, Miniature pinscher) with diffuse symmetric alopecia on the chest and excessive scales was referred to Veterinary Medical Teaching Hospital of Chungnam National University, Korea. On physical examination, diffuse alopecia on ventral aspect of the neck and caudomedial thighs, and severe scales were presented. Dermatologic tests of lesions revealed bacterial infections. Histopathologically, atrophy of hair bulb was observed in the severely alopecic lesion of caudomedial thighs. ACTH stimulation test was performed to differentiate the endocrine disorder related to generalized alopecia. The pre-ACTH serum testosterone and progesterone concentrations were above normal ranges and the post-ACTH serum testosterone concentration was high. The pre- and post-ACTH serum estradiol and cortisol concentrations were within normal ranges. Canine pattern alopecia was diagnosed based on history, physical examination, hormonal assay and dermatohistopathologic examination. After 3 months of melatonin administration, multifocal alopecia on the trunk was improved and general hair regrowth was identified.

• Korean Journal of Veterinary Research
• /
• v.43 no.2
• /
• pp.307-310
• /
• 2003

An atrial septal defect (ASD) is congenital heart disease with a communication between the atria, which allows blood to shoot from the atrium with pressure. A 3-month-old female Miniature Schunauzer was referred to the Veterinary Teaching Hospital of Konkuk University for the evaluation of systolic heart murmur. At presentation, the mucous membrane was cyanotic. On physical examination, an ejection-type systolic murmur was auscultated at the pulmonic area. In addition, thoracic radiography showed enlargement of main pulmonary artery and right atrial/ventricular enlargement. Echocardiography revealed dilated right atrium and atrial septal defect. However, mitral and tricuspid valve were still intact and well tolerating. The presence of an ASD was confirmed by identifying flow across the defect with color Doppler imaging. Doppler echocardiography provides a means of non-invasive documentation and quantification of ASD. Complete blood count and serum chemistry were not remarkable. Although large defect was confirmed between the two atrium, the patient did not show any obvious clinical signs of heart failure at this time.

• Korean Journal of Veterinary Research
• /
• v.48 no.1
• /
• pp.125-130
• /
• 2008

Mesenteric torsion was diagnosed in a 2-year-old, spayed female Miniature Schnauzer. The patient was presented with acute depression, vomiting, lethargy and hematochezia. On physical examination, severe dehydration, tachycardia, tachypnea, weak femoral pulse, delayed capillary refill time and pale mucous membrane were found and the dog was in shock. Radiography and ultrasonography revealed intestines distended with gas, ascites and the "C" shaped distended intestine. Medical treatments including fluid therapy, analgesics, antibiotics and lidocaine for reducing reperfusion injury were applied. And then, the mesenteric torsion was definitively diagnosed through exploratory laparotomy and intestinal resection and anastomosis were performed. The dog made an uneventful recovery and was free of clinical sign one week after surgery. Mesenteric torsion is an unusual and life-threatening disease in dogs. It has usually been described in the middle and large breed dogs, especially German Shepherds. However, the mesenteric torsion should be included in the differential diagnostic lists for acute abdomen even in small breed dog. The mortality rate of mesenteric torsion can be reduced through prompt diagnosis, proper preventive therapy for shock and reperfusion injury and emergency surgery.

• Korean Institute of Interior Design Journal
• /
• no.34
• /
• pp.149-156
• /
• 2002

This study intends to acquire objective models for basic quantitative analysis of pattern and space through image-recognition technique, and verify the effectiveness of such acquired models. Many experiments showed that the recognized result can be varied depending on the different viewpoints and the analysis based on the single-viewpoint images does not provide objectivity. The experiment using multi-viewpoint image models, which was attempted as an alternative for the disadvantages, showed the recognition similar to that of the actual model. Especially, images generated at laboratory using miniature model may be useful in comparing and understanding plural number of patterns. The models that have been acquired using such images may be hard to use in acquiring images for analyzing actual building patterns or indoor space, although they may be useful in pattern analysis using miniature model. The disadvantage, however, can be supplemented with panorama VR and C. G. simulation technique. Steady researches are required on the application of visual information to the image recognition principle and the model for quantitative analysis of pattern and space in addition to the research on the construction of the model that can be used in comparing and analyzing not only form and space but also miniature models.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.95-102
• /
• 2008

A miniature metal bellows is used to minimize the excessive flow of the cryogenic gas in Joule-Thomson micro cryocooler. It is made of metal alloy and its geometry is axisymmetric. The bellows is filled with high pressure gas. It contracts or expands in the axial direction for a wide change of temperature, because the pressure and volume inside the bellows must be satisfied with state equation of the gas. Therefore, in order to design the bellows in Joule-Thomson micro-cryocooler, it is important to evaluate deformation of the bellows under internal pressure exactly. Considering geometric nonlinearity, deformations analysis of the bellows were obtained by a commercial finite element code ANSYS, The bellows was modeled by 3-node axisymmetric shell elements with reduced integration. Experiments were also performed to prove the validity of proposed numerical analysis. The results by numerical analysis and experiments were shown in good agreements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.440-446
• /
• 2009

This paper was designed to fabricate the miniature spur gear with pitch circle of 2.25mm using extrusion process of a mechanically alloyed Al-78wt%Zn powder. The mechanical alloying of the powder particles were performed for ball milled times of 4h, 8h, 16 and 32h by the planetary ball milling. The mechanical properties of these alloyed powders, which were compacted and sintered-cylindrical preforms, were estimated using compression test. The results showed that the alloyed powder with average particle size of $10{\mu}m$ milled for 32h has the highest compressive(fractured) strength(288MPa). Extrusions of the miniature spur gear using the alloyed powder were carried out at different extrusion temperatures. Extrusion temperature of $300^{\circ}C$ provided the spur gear with the highest relative density and Vickers hardness and without any surface defects.

• Biomedical Science Letters
• /
• v.16 no.4
• /
• pp.359-363
• /
• 2010

The miniature pig is a very suitable donor species in xenotransplantation of human organs. Intestine ischemia/reperfusion (I/R) is associated with high morbidity and mortality. Endoplasmic reticulum (ER) stress and apoptosis has been associated with the onset of diverse diseases. Thus, we examined the effect of intestine I/R on the expression of ER stress and apotptosis related molecules. In the present study, I/R induced phosphorylation of protein kinase-like endoplasmic reticulum kinase (PERK), IRE, and ATF-4. I/R also increased the expression of the proapoptotic transcription factor CAAT/enhancer-binding protein homologous protein (CHOP). In addition, I/R decreased the expression of Bcl-2, but increased the expression of Bax, cleaved PARP, and cleaved caspase-3. Moreover, I/R increased splicing form of XBP-1 mRNA and the expression of caspase-6 and caspase-3 mRNA. In conclusion, intestine I/R induced ER stress and apoptosis in miniature pig.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1775-1783
• /
• 2001

For two decades, there has been an active research to enhance the performances of Particle Image Velocimetry (PIV) systems. However, the resulting systems are somewhat very costly, cumbersome and delicate. In this paper, we address the design and some first experimental results of a PIV system belonging to the opposite paradigm. The Miniature PIV or MPIV system feature relatively modest performances, but is considerably smaller (out MPIV could hold in dia. 40 mm$\times$120 mm), cheaper (out MPIV total cost is less than $500) and easy to handle. Potential applications include industrial velocity sensors. The proposed MPIV system uses a one-chip-only CMOS camera with digital output. Only two other chips are needed, one for a buffer memory and one for an interfacing logic that controls the system. Images are transferred to a personal computer (PC or laptop) via its standard parallel port. No extra hardware is required (in particular, no frame grabber board is needed). In our first MPIV prototype presented in this paper, the strobe lighting is generated by a cheap 5 mW laser pointer diode. Experimental results are presented and discussed.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.70-77
• /
• 2013

An experimental study was carried out to understand the heat transfer performance of a miniature loop heat pipes using water-based copper nanoparticles suspensions as the working fluid. The suspensions consisted of deionized water and copper nanoparticles with an average diameter of 80 nm. Effects of the cupper mass concentration and the operation pressure on the average evaporation and condensation heat transfer coefficients, the critical heat flux and the total heat resistance of the mLHPs were investigated and discussed. The pressure frequency also depends upon the evaporator temperature which has been maintained from $60^{\circ}C$ to $90^{\circ}C$. The Investigation shows 60% filling ratio gives the highest inside pressure magnitude of highest number pressure frequency at any of setting of evaporator temperature and 5wt% results the lowest heat flow resistance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.9
• /
• pp.30-37
• /
• 2000

In this paper, design and fabrication of miniature voltage-controlled oscillator(VCO) is discussed . Based on the two-port circuit analysis technique, VCO for 900MHz cellular mobile phone is designed and circuit parameters are optimized using the circuit simulator. Using the optimized design parameters, miniature VCO with 6${\times}$6${\times}$1.8 mm$^3$(0.065cc) dimensions is fabricated and experimented. Experimental results show that implemented VCO has -3.5 dBm output power level and 45MHz tunung range, respectively, and has -101.5dB/Hz Phase noise performance at 10 KHz frequency offset.