• 제목/요약/키워드: Mini-tubes

검색결과 7건 처리시간 0.016초

공랭식 미소유로 응축기의 R410A 충전량 예측에 관한 수치적 연구 (A Numerical Study on R410A Charge Amount in an Air Cooled Mini-Channel Condenser)

  • 박창용
    • 설비공학논문집
    • /
    • 제22권10호
    • /
    • pp.710-718
    • /
    • 2010
  • A numerical study was performed to predict refrigerant charge amount in a mini-channel condenser for a R410A residential air-conditioning system. Multi-channel flat tubes with 12 mini-channels of 1.17 mm average hydraulic diameter for each tube were applied to the condenser. The condenser consisted of 3 passes, and the first, second, and third pass had 44, 19, and 11 tubes, respectively. Each pass was connected by a vertical header. In this study, the condenser was divided into 410 finite volumes, and analyzed by an $\varepsilon$-NTU method. With thermophysical properties and void fraction models for each volume element, the R410A amount distribution and a total charge amount in the condenser were calculated. The predicted total charge amount was compared with the experimentally measured charge amount under a standard ARI A condition. The developed model could predict the charge amount in the mini-channel condenser within prediction errors from -23.9% to -3.0%. Air velocity distribution at the condenser face was considered as non-uniform and uniform by the simulation model, and its results showed that the air velocity distribution could significantly influence the charge amount and vapor phase distribution in the condenser.

은 나노유체의 미세관내 층류 유동의 압력강하 및 열전달계수에 관한 실험적 연구 (An Experimental Study on Pressure Drop and Heat Transfer Coefficient of Laminar Ag Nanofluid Flow in Mini-Tubes)

  • 권정태;남택훈;김태완;권영철
    • 한국산학기술학회논문지
    • /
    • 제10권12호
    • /
    • pp.3525-3532
    • /
    • 2009
  • 본 연구에서는 두 가지 종류의 미세관(외경 1/8inch, 3/16inch)을 사용하여 증류수 및 0.1vol.%, 0.3vol.%의 농도를 가지는 은 나노유체의 층류 유동 조건인 Re수 500~2,500의 범위에서 압력강하 및 나노유체의 열전달 계수를 실험적으로 구하였다. 압력강하의 경우 나노유체의 압력강하는 증류수에 비해 최대 21% 증가하였다. 대류열전달계수의 경우 나노유체 0.1vol%의 경우 증류수에 비해 1/8inch관에서는 약 3~42%, 3/16inch관에서는 약 3~69%의 향상이 있었다. 또한, 0.3vol%의 경우 1/8inch관에서는 약 35~65%, 3/16inch관에서는 약 62~125%의 향상이 있는 것을 알 수 있었다. 이상의 결과에서 은나노유체를 기계 및 전자 시스템의 냉각제로 사용할 경우 증류수에 비해 매우 우수한 냉각성능을 보일 것으로 판단된다.

Iatrogenic Perforation of the Left Ventricle during Insertion of a Chest Drain

  • Kim, Dongmin;Lim, Seong-Hoon;Seo, Pil Won
    • Journal of Chest Surgery
    • /
    • 제46권3호
    • /
    • pp.223-225
    • /
    • 2013
  • Chest draining is a common procedure for treating pleural effusion. Perforation of the heart is a rare often fatal complication of chest drain insertion. We report a case of a 76-year-old female patient suffering from congestive heart failure. At presentation, unilateral opacity of the left chest observed on a chest X-ray was interpreted as massive pleural effusion, so an attempt was made to drain the left pleural space. Malposition of the chest drain was suspected because blood was draining in a pulsatile way from the catheter. Computed tomography revealed perforation of the left ventricle. Mini-thoracotomy was performed and the drain extracted successfully.

인접면 삭제와 변위-기반 접착술로 부착한 수용성 튜브를 이용한 절치 돌출의 교정 치료: 증례보고 (Orthodontic correction of bialveolar protrusion by interproximal reproximation and water-soluble tubes bonded with deflection-based bonding technique: A case report)

  • 노유연;임성훈;정서린
    • 대한치과의사협회지
    • /
    • 제55권12호
    • /
    • pp.850-860
    • /
    • 2017
  • Orthodontic treatment with premolar extraction is usually performed to correct bialveolar protrusion. These methods require the use of stiff rectangular working archwire which requires lengthy alignment and leveling before insertion. In this case report, interproximal reproximation was performed instead of extraction. To establish clearance between the archwire and resin domes fixing the archwire, an archwire was inserted into a water-soluble tube before fabricating resin domes. This tube is solved away by the saliva. During fabrication of resin domes, the archwire was deflected intentionally reflecting the displacement of teeth from their ideal position. This can be called as deflection-based bonding (DBB) technique. DBB is different from conventional method of positioning the brackets on its ideal position and then inserting an archwire to align the brackets. Because the orthodontic force of the archwire comes from its deflection from passive configuration, deflecting an archwire as needed can move the teeth more predictably than just bonding brackets on its ideal position. Also, areas with good alignment before orthodontic treatment can be maintained simply by not deflecting the archwire during bonding in these areas. After initial alignment, interproximal reproximation was performed to create 4.8 mm space in the maxillary arch and 4.2 mm space in the mandibular arch. These spaces were closed using orthodontic mini-implant anchorage thus retracting the maxillary incisors 4 mm posteriorly accompanied with 0.7 mm and 0.3 mm distal movement of right and left molars. By using interproximal reproximation and water-soluble tube with DBB, mild bialveolar protrusion was successfully treated without extraction.

  • PDF

봄철 소나무숲의 NVOC 농도와 숲환경과의 상관관계 (Relationship between NVOCs Concentration and Korean Red Pine (Pinus densiflora S. et Z.) Forest Environment in Spring Season)

  • 김건우;권치원;염동걸;정다워;최윤호;박범진
    • 한국산림과학회지
    • /
    • 제103권3호
    • /
    • pp.483-489
    • /
    • 2014
  • 본 연구는 봄철 소나무숲의 NVOC 농도와 숲의 물리환경과의 상관관계에 대하여 과학적으로 밝히기 위한 목적으로 수행되었다. 소나무숲의 대기중 NVOC의 포집을 위해 2013년 3월부터 2013년 5월까지 총 5회의 실험을 진행하였으며 Tanax-Ta가 충진된 1회용 튜브와 미니펌프를 사용하여 포집하였다. 매회의 실험마다 일중시간동안 총 세 번의 시간(일출, 남중, 일몰)에 측정을 하였으며 오차를 줄이기 위하여 같은 지점에서 두 개의 튜브를 사용하여 측정 후 분석한 평균값을 사용 하였다. 포집된 NVOC 물질 분석은 HS-SPME법을 사용하여 GC-MS로 분석하였다. 봄철 소나무숲의 NVOC 농도와 숲의 물리환경과의 상관관계에 대하여 분석한 결과, ${\alpha}$-pinene, ${\beta}$-pinene 등 대부분의 물질에서 온도, 이슬점이 높아질수록 농도가 높아졌으며 풍속이 클수록 농도가 낮아졌다. 본 연구에서 얻어진 자료들은 치유의 숲, 자연휴양림 조성 및 숲 환경에 대한 과학적인 근거를 제시함으로써 국민들의 건강증진과 여가활동에 유익한 정보로 사용 될 것이라 기대된다.

En-masse retraction with a preformed nickel-titanium and stainless steel archwire assembly and temporary skeletal anchorage devices without posterior bonding

  • Jee, Jeong-Hyun;Ahn, Hyo-Won;Seo, Kyung-Won;Kim, Seong-Hun;Kook, Yoon-Ah;Chung, Kyu-Rhim;Nelson, Gerald
    • 대한치과교정학회지
    • /
    • 제44권5호
    • /
    • pp.236-245
    • /
    • 2014
  • Objective: To evaluate the therapeutic effects of a preformed assembly of nickel-titanium (NiTi) and stainless steel (SS) archwires (preformed C-wire) combined with temporary skeletal anchorage devices (TSADs) as the sole source of anchorage and to compare these effects with those of a SS version of C-wire (conventional C-wire) for en-masse retraction. Methods: Thirty-one adult female patients with skeletal Class I or II dentoalveolar protrusion, mild-to-moderate anterior crowding (3.0-6.0 mm), and stable Class I posterior occlusion were divided into conventional (n = 15) and preformed (n = 16) C-wire groups. All subjects underwent first premolar extractions and en-masse retraction with preadjusted edgewise anterior brackets, the assigned C-wire, and maxillary C-tubes or C-implants; bonded mesh-tube appliances were used in the mandibular dentition. Differences in pretreatment and post-retraction measurements of skeletal, dental, and soft-tissue cephalometric variables were statistically analyzed. Results: Both groups showed full retraction of the maxillary anterior teeth by controlled tipping and space closure without altered posterior occlusion. However, the preformed C-wire group had a shorter retraction period (by 3.2 months). Furthermore, the maxillary molars in this group showed no significant mesialization, mesial tipping, or extrusion; some mesialization and mesial tipping occurred in the conventional C-wire group. Conclusions: Preformed C-wires combined with maxillary TSADs enable simultaneous leveling and space closure from the beginning of the treatment without maxillary posterior bonding. This allows for faster treatment of dentoalveolar protrusion without unwanted side effects, when compared with conventional C-wire, evidencing its clinical expediency.

Components of phytoncide from a pine forest in the southern temperate zone

  • Lee, Jeong Do;Park, Choong Hee;Joung, Da Wou;Koo, Seung Mo;Park, Bum Jin
    • 농업과학연구
    • /
    • 제46권1호
    • /
    • pp.33-44
    • /
    • 2019
  • This study was conducted to examine the components of phytoncide from a pine forest in the southern temperate zone. Recent studies have found that a large amount of phytoncide is released not only from cypress trees but also from pine trees. Because the amount released is the highest during summer, we selected a warm climate region in the southern temperate zone and measured the concentration in the month of August. To capture the phytoncide from the forest atmosphere, we used the adsorption tube method with a mini pump and successfully gathered 9 L of forest air at a flow rate of 150 mL/min. We performed duplicate sampling from two different tubes installed at the same location and derived the mean value. A gas chromatography/mass spectrometer detector with thermal desorption spectroscopy was utilized to perform quantitative and qualitative analyses of the captured material. The results showed that the average phytoncide particle of the pine forest in the southern temperate zone contained a number of components as follows in descending order: ${\alpha}$-Pinene (39%, $0.28ng/m^3$), followed by ${\beta}$-Pinene (16%, $0.11ng/m^3$), D-Limonene (8%, $0.06ng/m^3$), camphor (6%, $0.04ng/m^3$), camphene (6%, $0.04ng/m^3$), and p-Cymene (5%, $0.04ng/m^3$). There were also 13 additional phytoncide components in trace amounts. The results of this study are expected to provide a useful dataset for building a "Healing-forest".