• Tribology and Lubricants
• /
• 제28권2호
• /
• pp.93-98
• /
• 2012

The engine oil is an oil used for lubrication of various internal combustion engines. Recently, the vehicle and engine oil manufacture usually guarantee for oil change over 15000~20000 km mileage, but the most of driver usually change engine oil every 5000 km driving in Korea. In this case, it is possible to cause environmental contamination by used engine oil and increase the cost of driving by frequently oil change. In this study, we investigate the various physical properties such as flash point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and four-ball test for fresh engine oil and used engine oil after vehicle driving (5000 km, 10000 km). The test result showed that the total acid number and wear scar by four-ball test of used engine oil had increased than fresh engine oil, but 2 kind of used oil (5000 km and 10000 km) had similar physical properties.

• 한국전자통신학회논문지
• /
• 제9권1호
• /
• pp.91-96
• /
• 2014

최근 양산되고 있는 하이브리드 전기자동차에 비해서 연비를 좀 더 개선하기 위한 플러그인 하이브리드 전기자동차(Plug-in Hybrid Electric Vehicle)에 대한 연구가 활발히 진행되고 있다. 이 논문에서는 플러그인 하이브리드 전기자동차를 위한 고효율의 탑재형 충전기(on-board charger)에 대해서 연구한다. 탑재형 충전기는 2상 인터리브드 PFC 회로와 LLC 공진형 컨버터로 구성된다. LLC 공진형 컨버터의 새로운 설계절차를 본 논문에서 제안한다. 이는 매우 쉽고 강력한 방법이다. 위에서 언급한 내용을 확인하기 위해서 LLC 공진형 컨버터를 설계하고 PSIM 툴을 이용하여 테스트한다.

• 한국분무공학회지
• /
• 제21권4호
• /
• pp.223-236
• /
• 2016

On-road source emissions are major air pollutants and have been associated with serious health effects in Seoul metropolis. Thus, it is of fundamental importance to have an accurate assessment of vehicle emissions in order to implement an effective air quality management policy. As a result, there is a need to overview vehicle emission characteristics of air pollutants. This article discusses vehicle exhaust sampling and chemical analysis, emission characteristics of air pollutants, and emission regulations from passenger cars. The vehicle exhaust sampling and chemical analysis methods were described in particulate matter and gaseous compounds. In this article, chassis dynamometer, measurement instrumentation for nano-particulate matter and carbon compounds analysis device were described. For the gasoline and diesel vehicles, the effective parameters of emissions were average vehicle speed, vehicle mileage and model year. The particle number emissions for diesel nano-particles were sensitive to the sampling conditions. Also, the particle number emissions with a diesel particle filter (DPF) largely reduced rather than those without it. This article also describes different emission characteristics of air pollutants according to biodiesel or bioethanol mixing ratio. The Korean emission standards for passenger cars were compared with those of the US and EU. Finally, the objective is to give an overview of relevant background information on emission characteristics of air pollutants from passenger cars in Korea.

• 한국분무공학회지
• /
• 제23권3호
• /
• pp.128-135
• /
• 2018

In this study, the following conclusions could be obtained from the analysis of emissions contribution rates and features for contaminated emissions by 13,456 gasoline vehicles passed in the vehicle load test (ASM-idle) under the inspection year 2013 to 2017. It was confirmed that the contamination of the CO, HC, NOx by the displacement is reduced on over 3L engine. As a result of comparing the exhaust gas in the low speed idle mode and the AS2525 mode, the exhaust gas in the low speed idle mode was measured high. It is estimated that if ISG function is applied, emissions from idle condition will be reduced. NOx emissions were reduced when the engine power was above 200HP. It has been confirmed that the amount of exhaust emissions are significantly reduced for vehicles manufactured after 2004. As a result of analyzing the exhaust gas according to the season, it is judged that there is a correlation between HC and NOx according to the ambient temperature. The concentration of exhaust emission in vehicles with high accumulated distance increases, which is considered to be the result of aging of the vehicle.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.200-204
• /
• 2016

본 연구에서는 유로형(EURO type) 클린 디젤 CRDI(common rail direct injection) 엔진용 오버플로우 밸브 성능 평가 시스템을 구현한다. 친환경 조건에 맞도록 정밀 기능을 구비한 오버플로우를 위해 스프링의 하중을 고려한 구현이 중요하다. 특히 정밀제어에 따른 디젤 차량의 성능평가는 연비 향상과 환경 규제 만족이 필연적이다. 이에 성능평가를 위한 평가 알고리즘의 기본 조건은 100cc 미만에서 3.0 bar, 150 cc 이상에서 3.3 bar, 250 cc이상에서 4.0 bar를 사용하여 시험한다.

• 한국대기환경학회지
• /
• 제9권1호
• /
• pp.69-77
• /
• 1993

Exhaust emissions are calculated as a product of the emission factor and the vehicle kilometer traveled(VKT). The emission factor is a function of several parameters such as vehicle model year, vehicle mileage, traffic conditions, etc. The representative driving cycles classified as ten different types of an average vehicle speed were selected by analyzing passenger car driving patterns in Seoul. 51 vehicles were sampled and analyzed by types of vehicles, fuels used, model years and vehicle mileages also, exhaust emissions of them were measured by chassis dynamometer. Regression equations between average vehicle speeds and exhaust emissions are made for the estimation of emission factors at different vehicle speeds. Annual emission rates of air pollutants from motor vehicles in Korea were 1116$\times10^3 ton, 149\times10^3 ton, 413\times10^3 ton and 67\times10^3$ ton for CO, HC, NOx and particulats, respetively in 1990. It was found that 56% of CO and 49% of HC were originated from passenger cars and taxis, in addition, 87% of NOx and 100% of particulates were from buses and trucks using diesel fuels.

• 산업공학
• /
• 제13권3호
• /
• pp.471-478
• /
• 2000

One of the most important problems encountered by parcel transportation firms or LTL (Less-than-truckload) firms is the planning of daily linehaul operations. The transportation firm's goal is to determine the most efficient way to move all freight from its originating terminal to its destination terminal after each shipment is picked up from the shipping dock. The purpose of this study is to design a transportation system and develop an efficient scheduling algorithm for linehaul operations carrying small amount of shipment. This paper presents three approaches for efficient linehaul operations. The first approach examines drivers using the roundtrips which start from a terminal, visit several terminals, and return to the starting terminal. The second approach uses a freight assembly center where drivers take freight for a number of destination terminals which they then swap for freight for their starting terminal. The third approach is similar to the second approach in that it uses a transshipment point like a freight assembly terminal for shipment, but it has several transshipment points since each shipment may have a different transshipment point. In this study, we developed a mathematical formulation and algorithm for each approach. The experimental results using data of a LTL firm show that the third approach is more efficient than the other two. Mileage and overnight stays of the third approach are reduced by 10% and 30%, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.379-386
• /
• 2008

The 36 liter LNG tank is designed to fit in the limited installation space of a small truck. Two LNG tanks allow one ton truck to run about 432 km per fueling. which is about 1.8 times longer than CNG mileage for the same truck. The variation of BOG with car acceleration for the different fuel liquid/vapor ratios in a tank is analysed by the modified Fortran program "Pro-Heatleak". Computational analyses show that the relationship between the BOG and liquid/vapor ratio is linearly proportional at a given acceleration. Fuel consumption decreases the volume of liquid fuel in the tank but increases the specific BOG. BOG increases with increasing of car acceleration when fuel liquid/vapor ratio is greater than 0.5 and decreases with increasing of car acceleration when fuel liquid/vapor ratio is less than 0.5. The difference between maximum and minimum BOG for full tank is about 12 percents. For the fuel liquid/vapor ratio equal to 0.5 BOG does not depend on car acceleration.

• Environmental Analysis Health and Toxicology
• /
• 제29권
• /
• pp.9.1-9.3
• /
• 2014

Diesel exhaust particles (DEP) contain elemental carbon, organic compounds including Polyaromatic hydrocarbons (PAHs), metals, and other trace compounds. Diesel exhaust is complex mixture of thousands of chemicals. Over forty air contaminants are recognized as toxicants, such as carcinogens. Most diesel exhaust particles have aerodynamic diameters falling within a range of 0.1 to $0.25{\mu}m$. DEP was classified as a definite human carcinogen (group 1) by the International Agency for Research on Cancer at 2012 based on recently sufficient epidemiological evidence for lung cancer. Significant decreases in DEP and other diesel exhaust constituents will not be evident immediately, and outworn diesel car having longer mileage still threatens health of people in spite of recent remarkable development in diesel engine technology. Policy change in South Korea, such as introduction of diesel taxi, may raise health risk of air pollution in metropolitan area with these limitations of diesel engine. To protect people against DEP in South Korea, progressive strategies are needed, including disallowance of diesel taxi, more strict regulation of diesel engine emission, obligatory diesel particulate filter attachment in outworn diesel car, and close monitoring about health effects of DEP.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2886-2892
• /
• 2009

본 논문은 고객들이 인터넷 쇼핑몰을 이용함에 있어서 가장 중요시 하는 요인이 무엇인지를 탐색하는 것이었다. 중요요인은 요인분석을 이용하여 도출하였으며, 도출된 중요 요인인 주문속성, 상품속성, 배송속성을 대상으로 하여 AHP 분석을 실시하였다. 분석결과 상품속성이 가장 중요한 요인으로 작용하는 것으로 나타났으며, 상품속성 중에서 가장 중요하게 인식되고 있는 세부 요인들은 사후서비스로서 여기에는 반품 및 환불보장, 반품 및 교환허용 등의 순서로 나타났다. 그리고 그 다음의 중요 요인으로는 인센티브의 제공이었으며, 여기에는 할인쿠폰 제공, 포인트 적립제도 등의 세부요인이 중요하게 작용하는 것으로 분석되었다.