• 한국식품위생안전성학회지
• /
• 제38권2호
• /
• pp.37-45
• /
• 2023

국내 유통되고 있는 배달식품용 폴리프로필렌, 폴리에틸렌 및 폴리스티렌 기구류가 안전하게 관리되고 있는지 파악하기 위해 배달식품용 기구류를 수거하여 중금속 이행량(납, 카드뮴 및 비소)을 조사하였다. 모니터링에 사용된 시료는 용기, 뚜껑, 컵, 테이블용 기구, 파우치, 포장재로 총 6개의 품목으로 구성되어 있으며, 폴리프로필렌 51건, 폴리에틸렌 21건, 폴리스티렌 32건으로 총 104건이었다. 「식품용 기구 및 용기·포장 공전」의 시험법에 따라 식품모사용매로는 4% acetic acid를 사용하였고, 총 104건의 시료를 가혹조건인 100℃로 통일하여 용출한 것을 시험용액으로 하여 ICP-MS를 이용하여 납, 카드뮴 및 비소를 분석하였다. 납, 카드뮴 및 비소의 직선성은 결정계수(R²) 값이 0.9999 이상의 우수한 직선성을 보였으며, 납, 카드뮴 및 비소의 검출한계는 각각 0.001 ㎍/L, 0.001 ㎍/L 및 0.001 ㎍/L이었고, 정량한계는 각각 0.002 ㎍/L, 0.003 ㎍/L 및 0.003 ㎍/L로 나타났다. 또한, 정확성 및 정밀성은 JRC 가이드라인에서 제시하고 있는 기준을 만족하였다. 중금속 이행량 결과를 살펴보면, 총 104건의 시료에서 검출된 납, 카드뮴 및 비소의 이행량은 평균 0.009-0.260 ㎍/L로 「식품용 기구 및 용기·포장 공전」에서 설정된 용출규격인 1,000 ㎍/L 대비 매우 낮은 수준이었고, 기준·규격을 초과하는 시료는 없었다. 이를 통하여 현재 유통되고 있는 배달식품용 폴리프로필렌, 폴리에틸렌 및 폴리스티렌 기구류의 중금속 함량이 안전한 수준으로 관리되고 있음을 확인하였다. 본 연구 결과는 배달식품용 기구류의 중금속 이행량 관리에 대한 과학적 기초자료로 활용될 수 있을 것으로 사료된다.

• 한국미생물·생명공학회지
• /
• 제44권3호
• /
• pp.285-292
• /
• 2016

본 연구에서는 에탄올과 고압 열수 추출에 의해 준비된 벼세포 추출물의 창상 치유 효능 평가를 위해, 인간 섬유아세포와 각질세 포에 추출물 처리하여 세포 독성, 세포 이동능, collagen 단백질 및 유전자의 발현 양상에 대해 실험을 진행하였다. 그 결과 추출물은 처리한 범위에서 두 세포에 전혀 독성을 나타내지 않았으며, 대조구에 비해 증식을 최대 25% 촉진시키는 것으로 나타났다. 또한 인위적으로 세포에 창상을 낸 후 세포 이동능을 평가하였을 때, 비처리군에 비해 처리 농도에 비례하여 230−450% (섬유아세포), 170−350%(각질세포) 이동성이 향상되는 것을 확인할 수 있었다. 창상 치유의 중요한 역할을 하는 collagen의 유전자와 단백질 모두 추출물 처리시 농도의존적으로 증가하는 것을 확인할 수 있었다. 특히 에탄올 추출물 100 mg/ml 처리시에는 양성 대조군인 vitamin C (500 μM)와 유사한 효능을 나타내었다. 따라서 본 연구의 결과는 벼세포 추출물이 창상 치유제로서의 활용 가능성에 대해 제시하고 있다.

• Biomolecules & Therapeutics
• /
• 제26권4호
• /
• pp.380-388
• /
• 2018

Neural stem cells (NSCs) have the ability to self-renew and differentiate into multiple nervous system cell types. During embryonic development, the concentrations of soluble biological molecules have a critical role in controlling cell proliferation, migration, differentiation and apoptosis. In an effort to find optimal culture conditions for the generation of desired cell types in vitro, we used a microfluidic chip-generated growth factor gradient system. In the current study, NSCs in the microfluidic device remained healthy during the entire period of cell culture, and proliferated and differentiated in response to the concentration gradient of growth factors (epithermal growth factor and basic fibroblast growth factor). We also showed that overexpression of ASCL1 in NSCs increased neuronal differentiation depending on the concentration gradient of growth factors generated in the microfluidic gradient chip. The microfluidic system allowed us to study concentration-dependent effects of growth factors within a single device, while a traditional system requires multiple independent cultures using fixed growth factor concentrations. Our study suggests that the microfluidic gradient-generating chip is a powerful tool for determining the optimal culture conditions.

• 대한치과의사협회지
• /
• 제48권10호
• /
• pp.738-753
• /
• 2010

Objectives: To deter job migration and to facilitate a more efficient personnel management system, a personality type analysis tool, such as MBTI and Enneagram, may be considered. These tools can facilitate better recognition of talent among prospective employees, as well as more efficient allocation of tasks for greater job satisfaction. Methods: This study conducted direct interviews with dental hygienists currently employed at two major dental organizations, which operate the largest networks of clinics across the greater metropolitan area. Results : First, in terms of number of turnover experiences, the Head Type showed lower task satisfaction, whereas the Body Type exhibited greater task satisfaction. Second, the Head Type showed greater job satisfaction compared to the other types. Third, the SJ Type, often considered the traditionalist in terms of long-term employments, exhibited greater tendencies toward long-term commitment with one employer. Fourth, dental hygienists, in terms of long-term employment, are negatively affected by task satisfaction, and positively affected by job satisfaction. Conclusions: It is thought to be considerable to use personality type analysis tools in clinical human resource management.

• 한국발생생물학회지:발생과생식
• /
• 제21권1호
• /
• pp.1-10
• /
• 2017

The use of human mesenchymal stem cells (hMSCs) in cell-based therapy has attracted extensive interest in the field of regenerative medicine, and it shows applications to numerous incurable diseases. hMSCs show several superior properties for therapeutic use compared to other types of stem cells. Different cell types are discussed in terms of their advantages and disadvantages, with focus on the characteristics of hMSCs. hMSCs can proliferate readily and produce differentiated cells that can substitute for the targeted affected tissue. To maximize the therapeutic effects of hMSCs, a substantial number of these cells are essential, requiring extensive ex vivo cell expansion. However, hMSCs have a limited lifespan in an in vitro culture condition. The senescence of hMSCs is a double-edged sword from the viewpoint of clinical applications. Although their limited cell proliferation potency protects them from malignant transformation after transplantation, senescence can alter various cell functions including proliferation, differentiation, and migration, that are essential for their therapeutic efficacy. Numerous trials to overcome the limited lifespan of mesenchymal stem cells are discussed.

• 한국연초학회지
• /
• 제28권1호
• /
• pp.31-35
• /
• 2006

In this study, the effects of the relative humidity and storage time of blended tobaccos at total blending silo on cut tobacco equilibrium moisture contents, leaf moisture contents and migration of casing materials of tobacco types were investigated. To maintain the cutting moisture content(21 $\pm$ 1 %), it is necessary to keep 75 % relative humidity at 28 $^{\circ}C$ at total blending silo. The moisture content of reconstituted tobacco sheet was changed from $13{\sim}14$ % to $19{\sim}21$ % within 2 h after preblending. The contents of glycerin and fructose of tobacco types followed by storage time after preblending were not changed significantly. From these results, it is suggested that 2 h storage time after preblending was sufficient to maintain physical properties of cut tobaccos and tobacco taste and fragrance.

• 한국산업보건학회지
• /
• 제24권3호
• /
• pp.353-358
• /
• 2014

Purpose: This study was conducted to evaluate desorption efficiency and storage stability on activated carbon acquired form domestic market. Materials: Mixture of acetone, benzene, normal hexane and toluene was injected on four types of charcoal 100 mg. After overnight, charcoal was desorbed by carbon disulfide $1m{\ell}$ and analyzed by gas chromatography with flame ionization detector. Results: Desorption efficiency of benzene, normal hexane and toluene in charcoal tubes were 95% ~ 105%. But desorption efficiency of acetone in charcoal tubes was below 75% and different from types of charcoal. The more injected amount of acetone on charcoal showed higher desorption efficiency. Acetone injected on charcoal tubes migrated from front section into back section after 10 days storage at room temperature. Conclusions: Desorption efficiency and storage stability of activated carbon acquired from domestic market was good for benzene, normal hexane and toluene. The activated carbon acquired from domestic market has ability to be used as sampling media.

• 대한화장품학회지
• /
• 제42권4호
• /
• pp.359-366
• /
• 2016

엑소좀은 세포에서 분비되는 작은 소낭체로서, 기원세포와 조직에 따라 다양한 기능을 수행하며, 세포생존 및 세포 간 커뮤니케이션에 중요한 역할을 한다. 최근 엑소좀을 활용하여 종양연구, 면역질환 개선, 질병진단 bio-marker 개발 등 다양한 분야에서 연구가 진행되고 있으나, 피부세포에서 분비기전 및 피부 생리적 기능에 대한 연구는 미흡한 실정이다. 따라서 본 연구에서 인체피부 유래 각질형성세포(HaCaT)로부터 분리된 엑소좀이 피부각질형성세포의 증식과 이주에 미치는 영향을 확인하고자 하였다. HaCaT으로부터 ExoQuick-TC를 활용하여 엑소좀을 분리하고, 열처리 엑소좀(boiled exosome)과 무처리 엑소좀(unboiled exosome)으로 구분하였다. HaCaT 유래 엑소좀은 농도 의존적으로($0.1{\sim}20{\mu}g/mL$) HaCaT의 증식을 유도하였으며, $20{\mu}g/mL$에서 대조군(control)에 비해 각각 $186.96{\pm}3.87%$(열처리) 또는 $193.48{\pm}10.48%$(무처리)의 증식 유도활성을 나타내었다. 또한 HaCaT 유래 무처리 엑소좀은 농도 의존적인($0.1{\sim}20{\mu}g/mL$) HaCaT의 이주활성을 나타내었고, $20{\mu}g/mL$에서 대조군에 비해 $179.39{\pm}4.89%$의 이주를 유도하였다. 그러나 열처리 엑소좀은 이주 유도활성을 나타내지 않았다. 뿐만 아니라 무처리 HaCaT 유래 엑소좀은 collagen sprout outgrowth를 농도 의존적으로 유도함을 확인하였다. 이러한 결과를 통해서 HaCaT 유래 엑소좀은 지질 및 열에 안정한 물질이 세포의 증식을 유도하고, 단백질 또는 열에 불안정한 물질이 세포의 이동 및 sprout out growth 활성에 관여하는 것으로 확인되었다. 따라서 피부각질형성세포 유래 엑소좀은 피부의 재상피화 및 상처치유 등의 활성을 나타낼 수 있으며, 향후 화장품소재로서 응용 가능성이 확인되었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권19호
• /
• pp.8019-8026
• /
• 2014

The promyelocytic leukemia (PML) gene is a gene known to be a tumor suppressor, although recent data suggest that it has a dual function in tumorigenesis. It was initially discovered in acute promyelocytic leukemia (APL) in which a t(15; 17) chromosomal translocation fused it to the retinoic acid receptor alpha ($RAR{\alpha}$). It has been shown to be involved in various types of cancer. It has at least 6 nuclear isoforms and a cytoplasmic type with different characteristics. Its multiple functions in growth inhibition, apoptosis induction, replicative senescence, inhibition of oncogenic transformation, and suppression of migration and angiogenesis have made it a therapeutic target for cancer therapy. However, its dual role in the process of tumorigenesis has made this field challenging. In this review, we discuss PML structure, functions and expression in tumors.

• 한국포장학회지
• /
• 제6권1호
• /
• pp.19-23
• /
• 2000

The increasing use of plastics in food packaging materials has led to the issue of food-packaging mutual interactions from residues in the plastics. Plastic films are commonly printed by using solvent-based ink to decorate the packaged food for consumer attention. However, the residual solvents can not be completely removed and they can migrate into the contained food which lead to undesirable off-flavors. Partitioning (Kp) of printing ink solvents was studied in two types of plastic films with different chemical structure and polarity. At $25^{\circ}C$, Kp of toluene is higher than that of isopropanol in PP, but isopropanol showed higher Kp value than toluene in EVOH. This showed that polarity had a significant effect on the partitioning of printing ink solvents into the plastic films. Printing solvents had a higher affinity to the polymer with similar polarity than it did to the different one.