• 동력기계공학회지
• /
• 제14권3호
• /
• pp.58-63
• /
• 2010

A laser beam welding and an electric arc welding were combined, and the positive points of each welding method are drawn such as high speed, low thermal load, deep penetration, and high productivity. The fiber laser-MIG conjugated welding. namely the hybrid welding has been studied mainly for the automation industry of a pipeline welding. In this study, the MIG welding was combined with a fiber laser welding to make up the hybrid welding. The weld shapes, microstructures and mechanical properties for weld zones after the hybrid welding or only fiber laser welding were investigated on the 700 MPa grade Ultra Fine Grained(UFG) high strength steel. The amount of acicular ferrite in weld metals and HAZ(heat affected zone) was observed larger after hybrid welding compared with after only laser welding. The Vickers hardness of the top area of the fusion zone after fiber laser welding was higher compared with after hybrid welding.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.538-541
• /
• 1996

The flow of the molten drop in the GMAW was observed to explain the mechanism of its formation and break-up process. Fluid flew analysis was made with the assumption that the electrode wire acts like fluid, and it is shown how the convection of the drop inside affects its flow, from the formation to the break-up of the drop. In later part, the process of the spray mode development at high current is shown, as well as the one of the globular mode, by the fluid flow analysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.624-627
• /
• 2010

최근 자동차 업계서는 차량의 온실가스 배출량을 줄이고 연비를 개선시킬 수 있는 방법 중의 하나로 경량화 소재를 사용하여 차체의 중량을 줄이는 연구가 활발히 진행 중에 있다. 특히 알루미늄 합금의 경우 기존 강재에 비해 비중이 낮아 가볍고 부식에 대한 저항성이 높아 많이 사용되어지고 있는 추세이다. 본 연구에서는 먼저, 저입열 용접공정을 적용하여 용접 변수와 토치의 각도에 따른 인장강도 특성을 비교하여 적정 용접 범위를 산정하였으며, 인장강도와 비드형상의 관계를 다중 회귀 분석을 이용하여 비드 예측 회귀 모델을 제시하였다. 또한 호감도 함수를 적용한 반응표면분석법을 이용하여 자동차 생산 현장에서 겹치기 용접 이음부의 강건한 용접 품질을 가질 수 있는 최적용접 공정 조건을 도출할 수 있는 효과적인 방법을 제안하고자 한다.

• Journal of Korean Biological Nursing Science
• /
• 제8권2호
• /
• pp.5-12
• /
• 2006

목적 : 본 연구는 암환자 및 암의 유형에 따라 중요한 종양억제 조절인자로 알려져 있는 모노카인을 flowcytometry를 이용하여 분석, 비교하고자 하였다. 방법 : 연구대상은 고형종양(solid tumor)으로 진단받은 33세에서 76세 사이의 암환자 30명(유방암, 난소암, 폐암, 위암)을 대상으로 말초혈액 단구의 intracellular monokine 중 $TNF{\alpha}$, MIG, MIP를 분석한 유사실험설계 연구이다. 연구결과 : 암환자 군에서의 $TNF{\alpha}$, MIG, MIP 수치는 대조 군인 정상 군에 비해서 유의하게 증가되었으며 특히, 유방암과 난소암 환자 군에서의 $TNF{\alpha}$ 수치는 폐암과 위암의 대상자에 비해 의미 있는 차이를 보여주었다. 논의 : 본 연구에서 제시된 암환자 군에서의 모노카인 수치는 선행연구의 결과와 통일하게 종양 대상자의 면역에 중요한 역할을 하는 것으로 규명 되었으나, $TNF{\alpha}$는 고형종양 중에서도 여성생식기계 암환자 군에서 더 증가하였다. 이에 따라 종양 유형에 따른 모노카인의 역할과 호르몬과의 상호작용기전 규명에 대한 추후 연구가 필요하다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.78-81
• /
• 2005

The aluminum Subframe for automobile was developed using hybrid process, i.e. extruforming and press forming. To achieve a $30\%$ weight reduction compared with convensional steel subframe keeping satisfactory performance, the design of cross-section of extrusion part was initiated, then forming simulation was performed and the final design was determined. In addition, we tried to estibilish proper aluminum welding conditions for good penetration depth and few pore defact, finally the prototype of aluminum subframe was assembled using MIG welding method.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 춘계학술발표회
• /
• pp.136-136
• /
• 1996

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.4-7
• /
• 2008

• Journal of Yeungnam Medical Science
• /
• 제20권2호
• /
• pp.129-141
• /
• 2003

Background: Leptin is a 16-KDa non-glycosylated peptide hormone synthesized almost exclusively by adipocytes. The well-known function of leptin is regulation of food intake and energy expenditure. Leptin also plays a regulatory role in immune and inflammatory process including cytokine production. The purpose of this study was to investigate the effect of leptin on the expression of several chemokine genes(RANTES, IL-8, MCP-1, IP-10, Mig, MIP-$1{\alpha}$, MIP-$1{\beta}$, and GRO-${\alpha}$) in THP-1 cells. Materials and Methods: Total RNA of THP-1 cells were prepared by Trizol method, and then stimulated with the leptin(250 ng/$m{\ell}$) or LPS(100 ng/$m{\ell}$). We examined the expression patterns of various chemokine mRNAs in THP-1 cell lines by RT-PCR and Northern blot. Results: Leptin did not induce the expression of chemokine mRNAs in THP-1 cells. The expression patterns of RANTES, IL-8, MCP-1, IP-10, and Mig mRNAs in THP-1 cells stimulated with leptin and LPS simultaneously was almost same to the patterns of LPS alone-induced chemokine mRNAs. RANTES mRNA expression was independent on the concentrations of leptin. Although leptin did not have strong effect on the expression of RANTES, IL-8, MCP-1, IP-10, Mig, MIP-$1{\alpha}$, MIP-$1{\beta}$, and GRO-${\alpha}$ mRNAs in THP-1 cells, leptin could induce the expression of long isoform of leptin receptor(OB-RL) mRNA, and its expression was elevated in simultaneous stimulation of leptin and LPS. Conclusion: These data suggest that leptin is able to induce OB-RL in THP-1 cells, however, leptin has little effect on the expression of pro-inflammatory chemokine genes.

• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.61-71
• /
• 2015

The effect of welding condition on microstructure and mechanical property of Plasma-MIG Hybrid Weld between Al 5083 plates(thickness : 10mm) was investigated. 1 pass weld without any defects such as puckering, undercut, and lack of fusion was obtained by 150~200A of plasma current and 5~7mm of welding speed. Gas porosities and shrinkage porosities were existed in the weld near fusion line. As welding speed and plasma current were decreasing, the area fraction of porosity was increasing. The hardness of the weld is increasing as welding speed. On the basis of microstructural analysis, Mg segregated region near dendrite boundaries tends to increase with the welding speed. In the result of hardness test, Distribution of hardness in fusion zone showed little change with the plasma current. However, when the welding speed increased, hardness in weld metal markdly increased. It could be considered that effect of heat input to growth of the dendritic solidification structures. Based on tensile test, tensile properties of weld metal was predominated by area fraction of porosities. Consequently, tensile properties can be controlled by formation site and area fraction of porosity.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1346-1358
• /
• 2018

A novel additive manufacturing method with TIG-MIG hybrid heat source was applied for fabricating 5356 aluminum alloy component. In this paper the microstructure evolution, mechanical properties and fracture morphologies of both as-deposited and heat-treated component were investigated, and how these were affected by different heat-treated temperature. The as-deposited microstructure showed dominant equiaxed grains with second phase, and the size of them is coarse in the bottom region, medium in the middle region and fine in the top region owing to different thermal cycling conditions. Compared with as-deposited microstructure, the size of grain becomes large and second phases gradually dissolve in the matrix as heat-treated temperature increase. Different microstructures determine the mechanical properties of component. Results show that average ultimate tensile strength enhances from 226 to 270 MPa and average microhardness increases from 64.2 to 75.3 HV0.1 but ductility decreases from 33 to 6.5% with heat-treated temperature increasing. For all components, the tensile properties are almost the same in the vertical direction (Z) and horizontal direction (Y) due to equiaxed grains, which exhibits isotropy, and the mechanisms of these are analyzed in detailed. In general, the results demonstrate that hybrid arc heat source has the potential to fabricate aluminum alloy component.