• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2013

Acoustic backscatter profiles were measured by Eco-sounder along an east-west section in the mid-eastern Yellow Sea and at an anchoring station in the low salinity region off the Keum River estuary in September 2012, with observing physical water property structure by CTD. Tidal front was established around the sand ridge developed in 50 m depth region. Internal waves measured by Eco-sounder during low tide period in the eastern side of the sand ridge were nonlinear depression waves with wave height of 15 m and mean wavelength of 500 m. These waves were interpreted into tidal internal waves that were produced by tidal current flowing over the sand ridge to the southeast. When weakly non-linear soliton model was applied, propagation speed and period of these internal depression wave were 50 m/s and 16~18 min. Red tides by Dinoflagelates Cochlodinium were observed in the sea surface where strong acoustic scattering layer was raised up to 7 m. Hourly CTD profiles taken at the anchoring station off the Keum River estuary showed the halocline depth change by tidal current and land-sea breeze. When tidal current flowed strongly to the northeast during flood period and land-breeze of 7 m/s blew to the west, the halocline was temporally raised up as much as 2 m and acoustic profile images showed a complex structure in the surface layer within 5-m depth: in tens of seconds the declined acoustic structure of strong and weak scattering signals alternatively appeared with entrainment and intrusion shape. These acoustic profile structures in the surface mixed layer were observed for the first time in the coastal sea of the mid-eastern Yellow Sea. The acoustic profile images and turbidity data suggest that relatively transparent low-layer water be intruded or entrained into the turbid upper-layer water by vertical shear between flood current and land breeze-induced surface current.

• Journal of the Korean Chemical Society
• /
• v.53 no.1
• /
• pp.42-50
• /
• 2009

The dielectric-spectroscopic and ac conductivity studies firstly carried out on layered manganese doped Sodium Lithium Trititanates ($Na_{1.9}Li_{0.1}Ti_3O_7$). The dependence of loss tangent (Tan$\delta$), relative permittivity ($\varepsilon_r$) and ac conductivity ($\sigma_{ac}$) in temperature range 373-723K and frequency range 100Hz-1MHz studied on doped derivatives. Various conduction mechanisms are involved during temperature range of study like electronic hopping conduction in lowest temperature region, for MSLT-1 and MSLT-2. The hindered interlayer ionic conduction exists with electronic hopping conduction for MSLT-3. The associated interlayer ionic conduction exists in mid temperature region for all doped derivatives. In highest temperature region modified interlayer ionic conduction along with the polaronic conduction, exist for MSLT-1, MSLT-2, and only modified interlayer ionic conduction for MSLT-3. The loss tangent (Tan$\delta$) in manganese-doped derivatives of layered $Na_{1.9}Li_{0.1}Ti_3O_7$ ceramic may be due to contribution of electric conduction, dipole orientation, and space charge polarization. The corresponding increase in the values of relative permittivity may be due to increase in number of dipoles in the interlayer space while the corresponding decrease in the values of relative permittivity may be due to the increase in the leakage current due to the higher doping.

• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.145-148
• /
• 2003

The Kunang cave paleolithic site is located at Tanyang [$N37^{\circ}2'$, $128^{\circ}21'E$], Chungbuk Province, which is in the Central part of the Korean peninsula. The cave is developed at 312 amsl in a karstic mountainous area. The South Han River flows across this region and other caves can also be found near the river. The site was discovered in 1986 and excavated 3 times by the Chungbuk National University Museum until now. The cave was wellpreserved from modem human activities until the first discovery. The full length of the cave is estimated to be ca. 140 m. However, a spacious part up to 11 m from the entrance has been excavated. Eight lithological units are divided over the vertical profile at a depth of 5 m. Each unit is deposited in ascending order as follow: mud layer (Unit 9), lower complex (Unit 8) which is composed of angular blocks and fragments with a muddy matrix, lower travertine layer (Unit 7； flowstone), middle complex (Unit 6; cultural layer) which is composed of fragments with a muddy matrix, middle travertine layer (Unit 5； flowstone), yellowish muddy layer (Unit 4), upper complex (Unit 3； cultural layer) which has a similar composition to Unit 8. the upper travertine layer (Unit 2； flowstone), and finally surface soil layer (Unit 1). The most abundant vestiges in the cultural layers are the animal bones. They are small fractured pieces and mostly less than 3 cm in length. About 3,800 bone pieces from 25 animal species have been collected so far, 90 percent of them belonging to young deers. Previous archaeological study of these bone pieces shows thatprehistoric people occupied the cavenot for permanent dwelling but for temporary shelter during their seasonal hunting activity. More extensive studies of these bones together with pollen analysis are in progress to reconstruct the paleoenvironment of this cave. Only a single date (12,500 BP) obtained from a U-Th measurement of the upper travertine layer was previously available. In spite of the importance of the cave stratigraphy, there was no detail chronological investigation to establish the depositional process of the cultural layers and to understand the periodic structure of the cave strata, alternating travertine floor and complex layers. We have measured five 14C age dating (38900+/-1000, 36400+/-900, 40600+/-1600, more than 51000 and 52000 14C BP) using Seoul National University 14C AMS facility, conducted systematic process of the collagen extraction from bone fragments samples. From the result, we estimate that sedimentation rate of the cave earth is constant, and that the travertine layers, Unit 2 and Unit 3, was formed during MIS 5a(ca. 80 kBP) and MIS 5c (ca. 100 kBP) respectively. The Kunang Cave site is located at Yochonli of the region of Danyang in the mid-eastern part of Korea. This region is compased of limestones in which many caves were found and the Nam-han river flows meanderingly. The excavations were carried out three times in 1986, 1988, and 1998.

• Journal of Distribution Science
• /
• v.14 no.8
• /
• pp.139-151
• /
• 2016

Purpose - In Chinese rose market, Korea competes against Latin American and African countries, but is not so competitive in terms of price and quality, implying the importance of using appropriate marketing strategies. This study aims to examine Chinese rose consumers' recognition and attributes of preference for roses produced in Korea, in order to use the result as baseline data for Korean rose exporters to China and provide implications that help establish a variety of marketing strategies targeting each region, income and age group. Research Design, Data and Methodology - 112 Chinese people were involved and interviewed in Chinese horticulture industry who had participated in 2016 Hortiflorexpo IPM Beijing. Online questionnaire survey was additionally conducted with 533 Chinese living in Korea and China. The Conjoint Analysis was conducted for region, age, and income group of respondents to estimate the relative importance of rose attributes evaluated by each population group and the utility derived from each attribute level. This process aimed to compare respective population groups for the relative importance and utility to derive implications for targeted marketing strategies. Results - The analysis finds that Chinese rose consumers prioritize rose color, followed by price, flowering stage, and flower size in purchasing roses. They prefer red roses most, followed by pink and then yellow. Moreover, they prefer larger roses, and relatively cheaper roses. The analysis reveals they prefer roses in their 20%-flowering stage to more than 40%-flowering stage. Conclusions - Establishing marketing strategies differentiated for each Chinese consumer group is critical in expanding Korean rose export. The analysis finds while Chinese consumers living in Beijing considered rose color and flowering stage more importantly than their counterparts in Shanghai, Chinese consumers living in Shanghai considered rose price and size more importantly than their counterparts living in Beijing. Therefore, establishing marketing strategies based on these attributes of preference in each region is necessary. Mid & low-income consumer groups considered price as the most important factor, and high-income consumer groups considered rose color as the most important one. It is, thus, important to focus on rose color when establishing a marketing strategy with targeting the high-income consumer group.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.17-27
• /
• 1985

Through the study of the physiognomical vegetation, the vertical distribution, the distribution of forest community and the flora of the woody plants on the south facing slope of Mt. Pal-Gong, the results obtained were summarized as follows. The forest of Pinus densiflora was dominant in the region of below 750m above the sea level, the mixed forest of conifer and broad-leaved trees in the region of 750m to 950m and the pure forest of deciduous broad-leaved trees in the region of above 950m. Pinus densiflora and Quercus mongolica were dominant for the upper-story trees, Acer pseudo-sieboldianum and Carpinus laxiflora for the mid-story trees, Lespedeza maximowiczii, Sasa purpurascens, Rhododendron mucronulatum and Rhododendron schlippenbachii for the under-story trees. Among seventeen forest communities, Cephalotaxus koreana, Populus davidiana and Alnus hirsuta var. sibirica were considered remarkable communities on the south facing slope of Mt. Pal-Gong. The woody plants growing on Mt. Pal-Gong are composed of 59 families, 7 subfamilies, 122 genera, 178 species, 29 varieties and 10 formae. Populus davidiana, Alnus hirsuta var. sibirica and Rubus phoenicolasius were collected newly in this study.

• Journal of the Korean association of regional geographers
• /
• v.7 no.4
• /
• pp.48-64
• /
• 2001

In the dissertation, Bibos are discussed as landscape features in the geographical context of Youngnam Region. The bibo tradition in Youngnam Region began with the incorporation of temple structures in Shilla and Kaya kingdoms, and spread throughout the country during the period of Unified Shilla. In Korea Dynasty, the diffusion of temple Bibo gained momentum, because Buddhism was worshipped as national religion. Then came a sea change in the Bibo repertoire with the replacement of Buddhism by Confucianism as an ideological prop for Chason Korea. The retreat of Buddhism led to the popularization of feng-shui motifs in Bibo strategy. The centers of the diffusion of the logic of bibo were major towns such as Kyongju, Ahndong, Sangju, and Chinju. The diffusion process continued top-down to mid-sized towns, and to the bottom of small villages. What sustained the hierarchical diffusion of Bibo attributes was myriad of transportation lines. The main artery of the diffusion in Korea Dynasty was that connecting Kaegyong to Kyongju. That same function was performed by the royal road running from Seoul through Sangju, Milyang, and to Tongrae. In the age of modernization, the feng-shui and Bibo landscapes have lost their original aura. They have suffered from the ruthless attacks of the Enlightenment logic of science. However, the elan vital of feng-shui and Bibo are still visible and strongly felt in the countryside. From field experiences, one can notice that the Bibo landscapes are tightly integrated into the rural way of life. The durability of the traditional geomancy shows us the beauty of the harmonious interplay between Youngnam people and the nature.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.3
• /
• pp.201-210
• /
• 2018

The characterization of detectors installed in space- and ground-based instruments is important to evaluate the system performance. We report the development of a detector performance test system for astronomical applications using the Andor iKon M CCD camera. The performance test system consists of a light source, monochromator, integrating sphere, and power meters. We adopted the Czerny-Tuner monochromator with three ruled gratings and one mirror, which covers a spectral range of 200-9,000 nm with a spectral resolution of ~1 nm in the visible region. Various detector characteristics, such as the quantum efficiency, sensitivity, and noise, can be measured in wide wavelength ranges from the visible to mid-infrared regions. We evaluated the Korea Astronomy and Space Science Institute (KASI) detector performance test system by using the performance verification of the Andor iKon-M CCD camera. The test procedure includes measurements of the conversion gain ($2.86e^-/ADU$), full well capacity ($130K\;e^-$), nonlinearity, and pixel defects. We also estimated the read noise, dark current, and quantum efficiency as a function of the temperature. The lowest measured read noise is $12e^-$. The dark current at 223 K was determined to be $7e^-/s/pix$ and its doubling temperature is $5.3^{\circ}C{\pm}0.2^{\circ}C$ at an activation energy of 0.6 eV. The maximum quantum efficiency at 223 K was estimated to be $93%{\pm}2%$. We proved that the quantum efficiency is sensitive to the operating temperature. It varies up to 5 % in the visible region, while the variation increases to 30 % in the near-infrared region. Based on the comparison of our results with the test report by the vendor, we conclude that our performance test results are consistent with those from the vendor considering the test environment. We also confirmed that the KASI detector performance test system is reliable and our measurement method and analysis are accurate.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.153-168
• /
• 2005

The purposes of this study were to determine the influence of midsole hardness and sole thickness of sports shoes on ball flex angle and position with increment of running velocity. The subjects employed for this study were 10 college students who did not have lower extremity injuries for the last one year and whose running pattern was rearfoot striker of normal foot. The shoes used in this study had 3 different midsole hardness of shore A 40, shore A 50, shore A 60 and 3 different sole thickness of 17cm, 19cm, 21cm. The subjects were asked to run at 3 different speed of 2.0m/sec, 3.5m/sec, 5.0m/sec and their motions were videotaped with 4 S-VHS video cameras and 2 high speed video cameras and simultaneously measured with a force platform. The following results were obtained after analysing and comparing the variables. Minimum angle of each ball flex position were increased with the increment of running velocity and shoe sole thickness(P<0.05), but mid-sole hardness did not affect minimum ball flex angle. The position which minimum angle was shown as smallest was 'D'. Midsole hardness and sole thickness did not affect time to each ball flex minimum angle, total angular displacement of ball flex angle, and total angular displacement of torsion angle(P<0.05). The position which minimum angle was appeared to be earliest was similar at walking velocity, and E and F of midfoot region at running velocity. Total angular displacement of ball flex position tended to increase as shifted to heel. It was found that running velocity had effects on ball flex angle variables, but shoe sole thickness partially affected. It would be considered that running velocity made differences between analysis variables at walking and running when designing shoes. Also, it was regarded that shoes would be developed at separated region, because ball flex angle and position was shown to be different at toe and heel region. It is necessary that midsole hardness and thickness required to functional shoes be analyzed in the further study.

• Korean Journal of Plant Resources
• /
• v.16 no.3
• /
• pp.212-217
• /
• 2003

This study was conducted to search for possible cultivation area of Rhodiola sachalinensis as well as to obtain the basic information of growth characteristics. One­year old nursery plants of Rhodiola sachalinensis were collected from Yonbyeon Hongkyungcheon development society in China This expriment was evaluted in three areas according to sea level such as plain region in Cheongwon(50m at sea level), mid­mountainous region in Jecheon(350m at sea level) mountainous region in Banyans(650m at sea level). The growth status Rhodiola sachalinensis showed wide range of variation in there areas. Plant height showed from 8.1cm to 15.8cm, number of branch showed from 3.1 eachs to 4.6 eachs and rate of withering showed from 76％ to 94％, respectively. It was increased rapidly at the early August caused by summer depression. Flowering period of Rhodiola sachalinensis was shown at around middle and late June, total duration of flowering showed from 12 to 13 days and flower colors were various as brown, dark purple, yellow green and brown red color.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1968-1975
• /
• 2011

This study was performed to propose a development guide for the periphery of local industrial park in the region of Hongseng-gun located at the mid-west of Chungnam province., which is a representative agrarian society, has been approached to a super-aged society where the region shows a continuous decrease in population, and the composition ratio of old ages is about 17.1%. Also, the region is a period of a low ebb due to the traditional agriculture based industrial structure in producing mainly simple productions. Many local governments in agrarian and fishing regions have been efforted for luring some businesses in their regions by constructing industrial complex competitively in order to solve such structural problems in such local regions. However, in some cases, these efforts cause certain destructions in the local original natural environment due to such development of industrial complex and the decrease in the settlement environment of residents. The objective of this study is to establish a local development plan for building the sustainable and comfortable settlement environments based on the settlement of the residents and the labors in such industrial complex by preventing sprawl developments in the construction of general industrial complex. This study was processed as following procedures. First, this study drew the trend in the change of the local society of H-gun through collecting literatures and analyzing it. Second, this study proposed a proper level of settlement environments required to the development of surroundings in such industrial complex based on the survey of the consciousness of residents using a statistical method. Finally, this study proposed a development guide for the surroundings based on the proposed level of settlement environments.