• Radiation Oncology Journal
• /
• v.7 no.1
• /
• pp.133-140
• /
• 1989

Three-dimension paraffin compensator was designed to construct the tissue equivalent compensator for irregular body contours and obiliques beam incidence. The ratio of compensator thickness to tissue deficit was depended on field size, depth and air gap because the scattered dose loss. The ratio of compensator-tissue was optimized 0.79, 0.73, 0.61 and 0.56 in 6MV x-rays as function of field size $4{\times}4$, $10{\times}10$, $20{\times}20$ and $30{\times}30cm^2$ respectively. in our study. Using this tissue equivalent compensator, it can be got 2% difference of dose at same mid-plane in phantom study.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.124-133
• /
• 1995

A theoretical self-consistent thermoelectric model has been developed for optimal thermal design in the self-signal processing infraed detectors. The model is achived by employing the coupled thermoelectric equation which allows which allows the simultaneous investigation of the termal and electrical aspects of device behavior. The thermal limitation of detectivity and responsivity are determined by the enegy gap, carrier concentration, lifetime, and mobility as a function of the temperature. The calculated results indicate that the detectivity is decreased at bias fields above about 50 V/cm, because the performence is limiting by temperature when the bias voltage reached the level associated with Joule heating. It has been also found that the improvement in the mid-band modulation transfer function(MTF) may be restricted by increasing the bias fields. Further, the important paramerers in the thermal optimization of SPIR detector, such as temperature in the device, ambipolar velocity, element thickness and length, are also considered. The analytical study provides a mathematical basis for optimal design of such a photoconductive IR detector and the agreement between the experimental and theoretical results are seen to be good.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.983-987
• /
• 2004

We have studied electro-optic characteristics of reflective optically compensated splay (R-OCS) cell. The initial configuration of this cell is in splay form such that a mid director lies parallel to the substrate and around it hybrid structure is formed symmetrically so the optically compensation effect exists. Optimized optical configurations could be achieved by using a single polarizer, a quarter-wave film and a cell with quarter-wane retardation. The optimal cell retardation is 0.34 ${\mu}$m, allowing to have large cell gap. The cell provides high contrast ratio of 80:1 at normal direction and the region with contrast ratio over 5:1 covert up to 160$^{\circ}$ horizontally and vertically at all wavelength range.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.107-156
• /
• 2018

This article examines the history of the in - house subcontracting and the stabilization of labor - management relations in the steel industry in Japan. The ratio of in-house subcontract workers among steel workers has increased steadily until the mid-2000s, and about 70% in case of the largest company. In-house subcontracting was used as a strategy of the company to increase the quantity flexibility of employment and to save labor costs. The in-house subcontracting company needed company-specialized skills, and the internal labor market was formed because the rate of full-time workers was high and the turnover rate was low. The in-house subcontractor introduced long-term business relationship with the steel factory by introducing the equipment and materials necessary for the performance of the work, and the factory implemented the productivity improvement policy of the in-house subcontractor, and the win-win relationship between the factory and in-house subcontractor was developed. The trade union did not oppose the idea that the expansion of in-house subcontracting contributed to corporate profits, the stability of employment of the members and maintenance of their working conditions. Since 2000, the steel factory has pursued the transformation of in - house subcontractors into subsidiaries, which has been supported by capital relations. By the way, since the mid-2000s, there has been an increase in the number of regular workers' employment. The major factors are as follows: more strengthened compliance with laws and regulations, the higher quality request of customers, stricter keeping of deadlines, and problem in recruiting of workers at in-house subcontract companies. The wage gap between the factory and in - house subcontracting was less at company B than at company S, and the wage level of in - house subcontracting was about 90% of the factory at company B. The relatively small gap at company B seems to be due to the union's movement of narrowing the gap, low market dominance and unfavorable labor market. The internal labor market has been formed in the in-house subcontracting, and the wage gap is not large, and the possibility of labor disputes is low. Industrial relations are stable in the in-house subcontract company as well as the factory. The stabilization of labor-management relations in the steel industry in Korea is required to reduce the wage gap between the factory and in-house subcontract enterprises by raising productivity and expanding the internal labor market at in-house subcontract enterprises.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.2
• /
• pp.476-505
• /
• 2013

Korea government has established and pursued green technology development strategy as the core of green growth, for example, withdrawal of 27 key green technologies through 'green technology research and development comprehensive plan ('09.1)' since 'low carbon green growth' was proposed as a new national development paradigm. In this study, we performed the Delphi survey of technology levels of 131 strategic product and service technologies derived from 27 key green technologies, utilizing large-scale group of green technology experts. The survey of technology level among main five nations resulted in the world's leading nation (US) versus EU (99.4%), Japan (95.3%), Korea (77.7%), China (67.1%) and Korea was ranked fourth. The technology gap between the world's leading nation (US) and Korea is 4.1 years behind EU (3.9 years) and Japan(3.1 years), but 2.1 years earlier than China. For our nation, key green technologies with high technology level are 'improved light water reactor (90.1%)', 'silicon-based solar cell (85.0%)', 'high-efficiency low-emission car (84.5%)' in order. Depending on the investment type of key green technologies, technology level is represented as short-term (85.0%), mid-term (77.3%) and long-term (71.1%) in order, indicating that lower technology level requires mid-to long-term investment and that the investment type is set appropriate.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.54-62
• /
• 2008

International organizations related to air transport such as ICAO, IATA, ACI are forecasting that the number of passenger will grow about 4.4% annually up to 2015. Therefore, the innovation of given system technology and operation procedure is required in global scale to cope with the increase of air traffic demand. CNS/ATM infrastructure based on satellite is considered to play key role in order to solve the problems due to the dramatic increase of air traffic demand over the world. Free flight concept in the air transport operation has been proved with CNS/ATM infrastructure especially in USA and Europe. Therefore, it is necessary to develop key technologies to overcome technology gap and to secure international competitiveness in Korea. ADS-B is an important issue, and new element technologies should be considered as essential items which were shown in Capstone project. Nowadays, the free flight concept is combined to Air Transport Road Map such as NextGen project in USA, SESAR in Europe. In this process, free flight is included in the concepts such as ATM(Air Traffic Management), aviation security and safety, environmental protection and economy development, wide area weather variable reduction service, information integration and application between the related authorities (civil/military) etc. The purpose of research is to establish mid-term and long-term infrastructure plan and strategy for free flight realization in Korea. The analysis of action target and equipment construction status, phase construction plan of infrastructure has been performed by considering mid-term and long-term free flight plans of USA and Europe.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.5
• /
• pp.663-671
• /
• 1996

The purpose of this study was to compare high-school students importance and performance toward restaurant service attributes for the marketing strategy development. Specific objectives were to: a) investigate restaurant patronage characteristics of high school students; b) identify the difference of patronage behavior among three types of restaurants; and c) analyze the importance and performance among three types of restaurants. A questionnaire was developed and hand-delivered to 400 students enrolled 9th grade in 4 different high schools in Seoul. A total of 320 students (80%) was responded to this study. The questionnaire was composed of two parts with 47 restaurant service attribute statements. Results of this study were as follows: 1. A total of 57% was female and 61% of respondents spent less than ￦5,000 per week on eating out. 2. The frequency of visiting the low-priced restaurant was 8.9 times per week. 3. Reasons for being a patronage to low- (${\geq}$￦2,000) and mid-priced ( <￦2,000 and ${\geq}$￦5,000) restaurants were hunger, appointment, and seeking favorites with freinds but the reason for high-priced (<￦5,000) restaurants was celebrating special days with parents. 4. The main source of information for selecting restaurants was family and friends, T.V. advertising, and bulletin board. 5. For the low-priced restaurants, food, hygiene, price, and location were rated as important; location, price, menu, and food were rated as satisfied. 6. For the mid-priced restaurants, hygiene, food, price, and menu were rated as important; food, hygiene, service, and menu were rated as satisfied. 7. For the high-priced restaurants, hygiene, food, and atmosphere were rated as important; food, hygiene, atmosphere, and menu were as satisfied. 8. According to paired t-test, the score gap between importance and performance was the highest in the hygiene attribute; differences were high with the low-priced and low with high-priced restaurants.

• Journal of architectural history
• /
• v.30 no.6
• /
• pp.71-80
• /
• 2021

This study tries to shed light on character and architectural features of the 2nd construction of Bunhwangsa temple in the mid-8th century. The site of Bunhwangsa Temple is divided into upper and lower areas based on retaining walls running from northwest to southeast, and the main area of the temple centered on Geumdang(the main hall) is located in the upper area. Space composition of the lower area including Wonji(a garden pond) and Gangdang(a lecture hall), is noteworthy in that Bunhwangsa Temple was constructed in a deviating way from rigorous constructional disciplines and used their space efficiently. The Geumdang in the 2nd construction was the largest worship hall with 7×6 bays. The hall was designed to divide its space into two ; the core space was surrounded by outer space. Each gap between columns in the hall was narrowed from center to outer. The main construction of the Geumdang was built as a stable structure with lead-to corridors. This was a much-advanced style than Geumdang at Hwangnyongsa Temple. The Gangdang is presumed to be a large building site as a typical Gangdang style in the Silla era. It was built in the late 9th century and was located in the northern part of the retaining walls. The composition of the middle gate and southern corridors were in double and long corridor style and they were located in front of the 2nd construction. This style coincided in the form of the architectural style of the Hwangnongsa Temple. The 2nd construction of the Bunhwangsa Temple was smaller than the Hwangnongsa Temple. However, it was a prestigious architecture.

• Journal of Korea Trade
• /
• v.25 no.3
• /
• pp.1-20
• /
• 2021

Purpose - The purpose of this paper is to examine the welfare effects of standards harmonization between technologically asymmetric countries, and to determine optimal harmonization strategies for a country with mid-level technological advancement. Design/methodology - Following Salop's circular city model (Salop, 1979), this study constructs a simple, horizontally-differentiated oligopoly model in which three firms and three countries exist. Each country adopts different compatibility standards and each firm incurs conversion costs for foreign market access due to differences in standards. The conversion costs are related to technology; standards harmonization removes these costs between participating countries. The paper considers three cases: i) no harmonization; ii) harmonization with the more technologically-advanced country and iii) harmonization with the less technologically-advanced country. Findings - The paper first considers a scenario in which all three firms occupy some share of the market in each country. It shows that standards harmonization with both the technologically moreor less-advanced country always increases consumer surplus and social welfare. In addition, the producer surplus will increase if the harmonization partner has a higher technology level, whereas it may decrease if the partner has a lower technology level. It also shows that if most domestic export goods are in sectors with conversion costs above a certain level, harmonizing standards with a technologically more-advanced country should be prioritized. Such strategies, moreover, should be emphasized when there exists a large technology gap among countries. Lastly, the paper considers another scenario, in which harmonization leads to the foreclosure of the non-member firm from the member countries' markets. It shows that harmonization improves the social welfare of a mid-level technology country regardless of its partner's technology. It also shows that the country should prioritize harmonization with the technologically less-advanced country. Originality/value - Though some of the existing studies consider the welfare effects of harmonization, their main assumption is that firms have the same conversion technology. Since complying with standards often requires substantial technological advancement and technical expertise, harmonization of compatibility standards between countries with gaps in technological ability carries different implications. This paper investigates the welfare effects of this harmonization and determines an optimal harmonization strategy while considering technological asymmetry among countries in standards compliance.

• Korean Journal of Environment and Ecology
• /
• v.33 no.2
• /
• pp.187-201
• /
• 2019

This study examined the physicochemical water quality and evaluated the ecological health in 14 sites of Geum River (upstream, mid-stream, and downstream) using the fish community distribution and guilds and eight multi-variable matrices of FAI (Fish Assessment Index) during June 2008-May 2009. The analysis of the water quality variables showed no significant variation in the upstream and mid-stream but a sharp variation due to the accumulation of organic matter from the point where the treated water of Gap and Miho streams flew. The analysis of physicochemical water properties showed that BOD, COD, TN, TP, Cond, and Chl-a tended to increase while DO decreased to cause eutrophication and algae development from the downstream where Miho and Gap stream merged. The analysis of fish community showed that the species richness index and species diversity index increased in the mid-stream area but decreased in the downstream area, indicating the stable ecosystem in the upper stream and the relatively unstable ecosystem in the downstream. The analysis of the species distribution showed that the dominant species were Zacco platypus that accounted for 20.9% of all fish species and Zacco koreanus that accounted for 13.1%. The analysis of the fish tolerance and feeding guild characteristics showed that the sensitive species, the insectivore species, and the aquatic species were dominant in the mid-stream point. On the other hand, contaminants from the sewage water treatment plant of Miho stream had a profound effect in the downstream to show the dominance of tolerant species, omnivorous species, and lentic species. Therefore, it is necessary to improve water quality by reducing the load of urban pollutants and to pay attention to the conservation and restoration of aquatic ecosystems.