• Magazine of the Korea Concrete Institute
• /
• v.7 no.6
• /
• pp.233-241
• /
• 1995

In this thesis, the fatigue tests were performed on a series of R /C beams repaired with co& crete-lmlyrner composites to investigate the fatigue bahavior. The three point loading system is used in the fatigue tests. In these tests, relations between the repeated loading cycles and mid-span deflections, number of repeated loading cycles when repaired beams were fractured, the bonding performance of repair materials were observed. On this basis, the mid-span deflections, the crack growth and failure mode of repaired R /C beams were studied. A S-N curve was drawn to present the fatigue strength of repaired beams. From the test results, it was shown that behavior of R /C beams repaired with polymer-cement series were very sirnillar to control beam about bonding performance, mid-span deflections and fatigue strength according to S-N curve drawn by the regression anlysis on the fatigue test results.

• Korean journal of communication and information
• /
• v.77
• /
• pp.137-163
• /
• 2016

In the early 1900, photography, magic lantern and cinema were simultaneously introduced and experienced until the mid-1910s as mysterious and magical symbol of modern science and technology. The technology of vision, cinema in particular demonstrated its commercially expandable potentials through serial films in the mid-1910s, silent cinema in the 1920s and talkies in 1930s. I argue that a metaphor 'like a movie' which was would be spoken out by peoples as a cliche ever since the late 1910s whenever they encountered something uncanny, mysterious, and looking wholly new phenomena informs how cinematic technology worked in colonial society at the turning point to the early 20th century. Mass in colonial society accepted cinema and other visual technologies not only as an advanced science of the times but as texts of modernity that is the reason why cinema had so quickly taken cultural hegemony over the colony. Until the mid-1920s, discourse on cinema focused not on cinema itself, rather more on the theatre matters such as hygiene, facilities for public use, disturbance, quarrels and fights, theft, and etc. Since the mid-1920s and especially in wartime 1930s, discourses about negative influences and effects of cinema on behavior, mind and spirit of masses, bodily health, morality and crime were articulated and delivered by Japanese authorities and agencies like as police, newspapers and magazines, and collaborate Korean intellectuals. Theories and research reports stemming from disciplines of psychology, sociology, and mass-psychology that emphasized vulnerability and susceptibility of the crowd and mass consumers who would be exposed to visual images, spectacles and strong toxic stimulus in everyday lives. Those negative discourse on influences and effects of cinema was intimately associated with fear of the crowd and mass as well as new technology which does not allow clear understanding about how it works in future. The fact that cinema as a technology of vision could be used as an apparatus of ideology and propaganda stirred up doubts and pessimistic perspectives on cinema influence. Discourse on visual technology cinema constructed under colonial governance is doomed to be technology of mass control for empire's own sake.

• Publications of The Korean Astronomical Society
• /
• v.27 no.4
• /
• pp.153-159
• /
• 2012

We constructed an unbiased asteroid catalog from the mid-infrared part of the All-Sky Survey with the Infrared Camera (IRC) on board AKARI. About 20% of the point source events recorded in the IRC All-Sky Survey observations were not used for the IRC Point Source Catalog in its production process because of a lack of multiple detection by position. Asteroids, which are moving objects on the celestial sphere, are included in these "residual events" We identified asteroids out of the residual events by matching them with the positions of known asteroids. For the identified asteroids, we calculated the size and albedo based on the Standard Thermal Model. Finally we had a new brand of asteroid catalog, which contains 5,120 objects, about twice as many as the IRAS asteroid catalog.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1276-1290
• /
• 1997

The previous elastic stiffness formulas of leaf type holddown spring assemblies(HDSs) have been corrected and extended to be able to consider the point of taper runout for the TT-HDS and all the strain energies for both the TT-HDS and the TW-HDS based on Euler beam theory and Castigliano'stheorem. The elastic stiffness sensitivity of the leaf type holddown spring assemblies was analyzed using the derived elastic stiffness formulas and their gradient vectors obtained from the mid-point formula. As a result of the sensitivity analysis, the elastic stiffness sensitivity at each design variable is quantified and design variables having remarkable sensitivity are identified. Among the design variables, leaf thickness is identified as that of having the most remarkable sensitivity of the elastic stiffness. In addition, it was found that the sensitivity of the leaf type HDS's elastic stiffness is exponentially correlated to the leaf thickness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.1027-1039
• /
• 1995

Clothing fitness is strongly required in the apparel industry, and draping is an effective tool to increase fitness to the wearers. A more sophisticated and systematic information of the somatotype, accordingly, is necessary for better cress form design. This study was performed to provide fundamental data on middle aged women's upper torso for dress form designers and pattern makers by classifying the somatotype based on each individual's lateral view, and analyzing the characteristics of their somatotype. Data were analyzed by factor analysis, cluster analysis, analysis of variance. Factor analysis was used to 23 items from photometric measurment and cluster analysis was applied for classification of upper torso forms. Through cluster analysis using 5 factor scores, 3 somatotypes were categorized from th lateral view 1) Type I was straight somatotype in which the plumb line passes throught the lobe of the ear, the shoulder joing and the mid abdominal region laterally. This type of woman was slender and shorter than average. 2) Type II was bending somatotype in which the upper portion of upper torso is bent forward. This type of woman was taller and fatter than average. 3) Type III was swayback somatotype in which the upper portion of protruding point on the back is bent forward but the lower portion of protruding point had characteristic of turning over somatotype. This type of woman had storter length on the front and longer lenght on the back, slender type and flat chest.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1708-1714
• /
• 2011

AT feeding system of the electric railway system is installed every about 10km at between the feeder and catenary in parallel and the mid-point of the transformer is connected to the rail The supply voltage of this system is doubled than rolling stock voltage. So the voltage drop is smaller than usual. And the other merit of this system is the decreasing inductive disturbance to the communication line because of the reduced current in rail which runs reversed in a point of view of rolling stock. Also, ATP(Auto Transformer Post) is installed to reduce the voltage drop and to mitigate the inductive disturbance, but still now the proper distance between the ATP and AT feeding system is not established which ranges from 2 to 10[km]. The stable result of simulation(which is set that the end of the line AT is installed) to the voltage drop and inductive disturbance can not analyzes the effect to the supply system due to the ATP. This paper analyzes the effect to the system depending on the location of ATP by forecasting the voltage drop and inductive disturbance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.27-31
• /
• 2000

Thermal imaging system is implemented for the measurement and the analysis of the thermal distribution of the target objects. The main Part of the system is thermal camera in which a focal plane array typed sensor is introduced The sensor detects mid-range infrared spectrum or target objects and then it output generic video signal which should be processed to form a thermal image frame. A digital signal processor(DSP) in the system inputs analog to digital converted data. performs algorithms to improve the thermal images and then outputs the corrected frame data to frame buffers for NTSC encoding and for digital outputs.. To enhance the quality of the thermal images, two point correction method is applied. Figures indicate that the corrected thermal images are much improved.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.1 s.8
• /
• pp.123-131
• /
• 2003

An experiment was carried out to investigate the mechanical behaviour of the circular hollow section reinforced concrete member with internal corrugated steel tube. A specimen, 50cm in diameter and 340cm in length, was made and tested by 3 points bending. The test load was increased slowly (quasi static) to the failure or unacceptable deformation. During the test, lateral displacement at mid point and longitudinal displacement of extreme fiber on compressive and tensile side of the specimen were measured. The measured data were analysed and compared with calculated results for the equivalent member without inserted corrugated steel tube. The comparison shows that the flexural strength and ductility of hollow section reinforced concrete members can be improved by inserting corrugated steel tubes inside.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.123-128
• /
• 2020

Non-point source pollutant load reductions were calculated using the Hydrologic Simulation Program-Fortran (HSPF) model under the assumption that landuse pattern was changed according to land purchases. Upon the simulation of non-point pollutant and areas with high land purchase ratios to select a buffer zone, the Namgang dam Reach 11, Imha dam Reach 10, and the Reach 136 watershed of the main river were found to rank high for the construction of buffer zones. Assuming that the forms of the purchased lands were changed to wetlands, biological oxygen demand (BOD) loads were changed through the HSPF model. No changes of BOD were present in the Namgang dam and the Imha dam watersheds. BOD loads in Reach 136 according to landuse change were analyzed through a flow duration analysis based on the total maximum daily loads of the United States. The flow duration analyses undertaken to examine changes in BOD of main river Reach 136 watershed indicated a shift of 0.64 kg/d from 3.16 to 2.52 during high flow. The change of BOD under the conditions of moist, mid-range and dry were 11.9%, 9% and 4.5%. At the low flow condition, the variation range in the BOD load was from 0.58 kg/d to 0.41 kg/d.

• Korean Journal of Human Ecology
• /
• v.22 no.1
• /
• pp.117-129
• /
• 2013

The purpose of this study is to examine the factors affecting on CRPI (capability of retirement planning and implementing) and to identify the critical point of financial factors to increase CRPI. 908 Korean individuals' data were used for descriptive statistics, t-test, F-test, and Generalized Linear Mixed Model Analysis. As a result, CRPI was influenced by attitude toward retirement planning, gender, income, and propensity to save. Some mid-group did not make a significant difference in CRPI compared to the lower-group. Men were more capable at CRPI than women in terms of sense of independence and getting a consulting service. Most consumers appear to have difficulty in calculating their retirement fund. People who have income over 3,000,000 won have dramatically greater CRPI than people who have income under 3,000,000 won. And people who have saving ratio over 23% have significantly greater CRPI than people who have propensity to save under 23%. The monthly income 3,000,000 won and propensity to save 23% were considered as critical points related to CRPI.