• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.439-442
• /
• 2002

We present in this Paper a microwave Power sensor fabricated by a standard CMOS process and a bulk micromachining process. The sensor consists of a CPW transmission line, a resistor as a healer, and thermocouple arrays. An input microwave heater, the resistor so that the temperature rises proportionally to the microwave power and tile thermocouple arrays convert it to an electrical signal. The sensor uses air bridged 8round of CPW realized by wire bonding to reduce tile device size and cost and to improve the thermal impedance. Al/poly-Si junctions are used for the thermocouples. Poly-Si is used for tile resister and Aluminium is for transmission line. The resistor and hot junctions of the thermocouples are placed on a low stress silicon nitride diaphragm to minimize a thermal loss. The fabricated device operates properly from 1㎼ to 100㎽\ulcorner of input power. The sensitivity was measured to be ,3.2～4.7 V/W.

• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.75-80
• /
• 2021

In this paper, a dual-band Koch Snowflake antenna is proposed for wireless communication systems. Fractal geometry, CPW-feed and stepped ground planes are used to improve the impedance bandwidth. By properly introducing a hexagonal split-ring slot to radiating element, a lower frequency band is generated. The proposed structure is fabricated and tested. Experiment results exhibit dual-band of 0.73-0.98 GHZ and 1.6-3.1 GHz which makes this antenna suitable candidate for GSM900, GSM1800, UTMS2100, Wi-Fi 2400 and LTE2600 bands. In addition, a good radiation pattern, a satisfactory peak gain and a radiation efficiency, which reaches 95%, are achieved.

• 한국전기전자재료학회논문지
• /
• 제18권9호
• /
• pp.827-832
• /
• 2005

Dual band internal antennas were fabricated with Ag conducting paste of various preparation conditions and different print thickness by silk screen print. We have investigated microwave properties were compared Ag conducting paste antenna with copperplate antenna at 800 MHz and 1,800 MHz. Gain of Ag conducting paste antenna was improved when preparation conditions were the single size Ag particle, using dry type resin and high Ag containing percent. However, it was lower than that of copperplate antenna within $0.1\~2.0dBi$ at 800MHz. In addition, it was improved at 800MHz when thickness of Ag conducting paste was printed more than skin depth but it was held after critical print thickness. On the other hand, it was reached level of copperplate antenna at 1,800MHz.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.571-576
• /
• 1999

This paper describes both electromagnetic properties and electromagnetic-wave absorbind (EMA) characteristics of the radar absorbing coating materials in the microwave frequencies. The coating materials are prepared by mixing ferrite powder with epoxy resin polymers. The electromagnetic property and the EMA characteristics of the coating materials are measured in the frequency ranges between 0.2 GHz and 15GHz using the S-parameter method. The results show that the typical coating material has ({{{{ {μ }`_{r } ^{' } }} of about 2 and ({{{{ { ε}`_{r } ^{' } }} of about 4. And the coating materials have a little EMA characteristics in the frequency from 4 to 6 GHz and more improved EMA characteristics around 12 GHz And it is desirable for improvement of the EMA characteristics of the coating materials to properly select electromagnetic properties of constitutional materials inthe interesting frequency ranges.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.28-33
• /
• 2013

Spin-torque oscillators (STO) is a new device that can be used as a tunable microwave source in various wireless devices. Spin-transfer torque effect in magnetic multilayered nanostructure can induce precession of magnetization when bias current and external magnetic field are properly applied, and a microwave signal is generated from that precession. We proposed a semi-empirical circuit-level model of an STO in previous work. In this paper, we present a refined STO model which gives more accuracy by considering physical phenomena in the calculation of effective field. Characteristics of the STO are expressed as functions of external magnetic field and bias current in Verilog-A HDL such that they can be simulated with circuit-level simulators such as Hspice. The simulation results are in good agreement with the experimental data.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1027-1032
• /
• 2002

(Pb$\_$0.4/Ca$\_$0.6/)(Fe$\_$1/2/Nb$\_$1/2/)O$_3$ system was modified by 10 mol% Pb(Zn$\_$1/2/W$\_$1/2/)O$_3$ addition and their sinterability and microwave properties were investigated as a function of the amount of flux (0.975PbO-0.025SnO$_2$). With increasing flux content, single perovskite phase was maintained up to 3 wt% flux addition and further addition led to the presence of Pb-rich second phase which was confirmed by EDS analysis. The apparent densities of PCFN-PZW specimen increased and showed maximum values at 2.5 wt% flux addition for the Ts=1000$^{\circ}C$ and 2.0wt% flux addition for the Ts=1050$^{\circ}C$, respectively. The dielectric constant and Q$.$f values strongly depended on the variation of density and microstructure, where the optimum values of $\varepsilon$$\_$r/ = 91.95, Q$.$f = 5938GHz, TCF = +8.15ppm/$^{\circ}C$ were obtained for the 2.5wt% flux added PCFN-PZW specimen sintered at 1000$^{\circ}C$ for 4h.

• 한국통신학회논문지
• /
• 제6권1호
• /
• pp.51-57
• /
• 1981

半導'||'&'||'#20307;內에서 運動하는 carrier는 Piezo 壓電物質을 進行하는 彈性波에 利得이나 損失을 줄 수 있게 된다. 本 論文에서는 半導 film에서의 drifting carrier와 Piezo 壓電 基板上을 進行하는 Rayleigh Wave間의 相互作用의 表面彈性波 增幅을 論하였다. Piezo 壓電媒質에서 表面波 의 電磁的 境界條件이 表面波 速度에 미치는 影響에 대한 式을 求하였다. 增幅에 필요한 bunching 電子 電子 散에 의해 抑制되므로 높은 周波數에서 利得의 低下를 招來하나 적당한 壓電 物質일 경우 超高周波 領域에서도 상당한 增幅이 기대됨을 알 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.777-783
• /
• 2007

In this work, a highly integrated downconverter MMIC employing HBT(heterojunction bipolar transistor) was developed for application to one chip tranceiver solution of Ku-band commercial wireless communication system. The downconverter MMIC (monolithic microwave integrated circuit) includes mixer filter. amplifier and input/output matching circuit. Especially, spiral inductor structures employing SiN film were used for a suppression of LO and its second harmonic leakage signals. Concretely, they were properly designed so that the self-resonance frequency was accurately tuned to LO and its second harmonic frequency, and they were integrated on the downconverter MMIC.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.104-111
• /
• 2015

목조건축물 주변 화재방제구역에서 벌채된 후 방치된 20기의 그루터기를 3년간 조사한 결과 흰개미 군체가 빠른 속도로 확산되고 있음을 확인하였다. 특히 송광사 경내 전체 31개 목조건축물 중 4개 동에서 흰개미에 의한 손상이 진행중인 것이 확인되어 서식지가 화재방제라인을 넘어 사찰 내부로 확산되고 있음을 확인하였다. 특히 극초단파 탐지장비를 이용한 조사를 통해 현재까지도 내부 손상이 진행 중인 것으로 확인되어 위험성이 매우 높았다. 따라서 정비되지 못한 화재방제구역은 오히려 목조문화재의 잠재적인 위해요소로서 작용하고 있다. 따라서 방화선 구축사업으로 인해 발생된 목재 및 그루터기의 효율적인 제거 방안이 요구된다.

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.38-42
• /
• 2005

B$_2$O$_3$ added Ba(Mg$_{1}$3/Nb$_{2}$3/)O$_3$ (BBMN) ceramics were not sintered below 900 $^{\circ}C$. However, when CuO was added to the BBMN ceramic, it was sintered even at 850 $^{\circ}C$. The amount of the $Ba_2$B$_2$O$_{5}$ second phase decreased with the addition of CuO. Therefore, the CuO additive is considered to react with the B$_2$O$_3$ inhibiting the reaction between B$_2$O$_3$ and BaO. Moreover, it is suggested that the solid solution of CuO and B$_2$O$_3$ might be responsible for the decrease of the sintering temperature of the specimens. A dense microstructure without pores was developed with the addition of a small amount of CuO. However, a porous microstructure with large pores was formed when a large amount of CuO was added. The bulk density, the dielectric constant ($\varepsilon$$_{r}$) and the Q-value increased with the addition of CuO but they decreased when a large amount of CuO was added. The variations of those properties are closely related to the variation of the microstructure. The excellent microwave dielectric properties of Qxf = 21500 GHz, $\varepsilon$$_{r}$ = 31 and temperature coefficient of resonance frequency($\tau$$_{f}$) = 21.3 ppm/$^{\circ}C$ were obtained for the Ba(Mg$_{1}$3/Nb$_{2}$3/)O$_3$+2.0 mol%B$_2$O$_3$+10.0 mol%CuO ceramic sintered at 875 $^{\circ}C$ for 2 h.h.2 h.h.