• 동아시아식생활학회지
• /
• 제20권3호
• /
• pp.423-432
• /
• 2010

In order to streamline bread making process that is time-consuming in regard to the characteristics of process, this study focused on microwave irradiation to dough and raising its temperature to monitor potential variations of dough properties and bread quality, and also examined optimum irradiation time to deduce effective ways for streamlining bread making process. According to analyze dough properties depending on microwave irradiation time, it was found that microwave heat (MWH) 2 showed the highest specific volume and oven spring of all and the lowest hardness (i.e. the highest softness). Moreover, MWH 2 scored the highest points in overall preference under sensory characteristics. As a result, it found that 80-second heating of 700 g bread dough, when exposed to microwave irradiation, contributed to the highest quality of bread.

• Mass Spectrometry Letters
• /
• 제10권3호
• /
• pp.79-83
• /
• 2019

Horse heart myoglobin (MYG) and bovine serum albumin (BSA) were hydrolyzed by microwave-assisted weak-acid hydrolysis for 10, 20, 30, 40, 50, and 60 min using 2% formic acid (FA) at $100^{\circ}C$. Generally, the number of identified peptides increased with increasing irradiation time, indicating that the duration of microwave irradiation is linked to the efficiency of hydrolysis. For MYG, irradiation for 60 min provided the highest number of identified peptides, the greatest sequence coverage values and the highest MASCOT score values among the investigated irradiation times. Irradiation of BSA for 50 min, however, yielded a greater number of peptides than irradiation for 60 min due to the generation of miscleaved peptides after microwave irradiation for 50 min.

• Journal of Animal Science and Technology
• /
• 제51권1호
• /
• pp.75-80
• /
• 2009

Composition changes of swine manure and the effects on MAP ($MgNH_4PO_46H_2O$) crystallization by microwave irradiation were examined. The concentration of ${PO_4}^{3-}$ was increased within a fixed period of time and then decreased, but $NH_4$-N was reduced continuously during microwave irradiation. Concentration of ${PO_4}^{3-}$ was started to reduce just from the point of foam formation during microwave irradiation, and the temperature at that time was always $49^{\circ}C$ irrespectively to microwave irradiation rate. Inorganic carbon was reduced with microwave irradiation, but soluble organic carbon (TOCs) was increased proportionally. Crystallization rate under conditions of non-microwave irradiation, irradiation up to $93^{\circ}C$ and $48^{\circ}C$ was 87.8%, 87.3% and 98.5%, respectively, showing 10% enhancement when irradiated up to $48^{\circ}C$. However, removal efficiency of ammonia nitrogen was proportional to the microwave irradiation rate or duration, obtaining 2.5%, 4.5% and 10.2%, respectively. Based on these results, it would be a useful strategy to irradiate microwave up to $49^{\circ}C$ to enhance MAP crystallization rate by changing the ionic pattern of nutrients in the manure. Meanwhile, provision of enough microwave irradiation rate might be needed to achieve high $NH_4$-N removal.

• 대한환경공학회지
• /
• 제27권7호
• /
• pp.732-738
• /
• 2005

본 연구는 슬러지의 효율적인 처리를 위하여 슬러지의 탈수 및 건조 효율에 미치는 마이크로파의 영향을 실험하여 마이크로파의 적정 처리 조건을 제시하는데 목적이 있다. 마이크로파를 이용하여 슬러지의 탈수 효율을 향상시키기 위해서는 슬러지 부피에 따른 적정 마이크로파의 조사시간의 결정이 매우 중요하며, 적정 시간 동안 마이크로파 처리된 농축슬러지의 경우 모세흡입시간이 52.3초에서 30.8초로 저감되어 탈수성이 상당히 향상되었고, 마이크로파에 의해 개량된 농축슬러지의 압력여과 후 함수율은 81.4%로 나타났다. 또한 마이크로파와 전기로의 탈수슬러지 건조 특성을 평가한 결과, 슬러지의 함수율을 55% 이하로 건조시키는데 마이크로파 가열 방식은 3분이 소요된 반면, 전기로를 이용하여 $105^{\circ}C$에서 건조한 경우에는 40분이 소요되었고, $170^{\circ}C$에서 건조한 경우는 20분이 소요되었으며, $300^{\circ}C$에서 건조한 경우는 9분이 소요되었다. 따라서 마이크로파를 이용하여 슬러지를 건조할 경우, 기존 가열 방식보다 훨씬 효율적으로 슬러지에서 수분을 제거할 수 있음을 알 수 있었다.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1130-1136
• /
• 2006

This work elucidates the effects of pretreatment of the sewage sludge from wastewater treatment plant by microwave irradiation on elutriated acid fermentation. These experiments typically fell into two process; pretreatment as microwave irradiation and elutriated acid fermentation for hydrolysis and acidification as main process of primary sludge. The results of maximum solubilization rate of B, D primary and secondary sludge were 0.042, 0.086 and 0.15 gSCODprod./gICODin and the optimum irradiation time of microwave on 2,450 MHz and 900 W were 5 min. for primary sludge and 7 min. for secondary sludge. From batch tests on elutriated acid fermentation that was used the pretreated primary sludge as microwave, the optimum pH and HRT (hydraulic retention time) were 7 and 5 days at $35^{\circ}C$ condition.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권3호
• /
• pp.347-354
• /
• 2010

This study aimed to evaluate effects of 800 W microwave irradiation for 2, 4 and 6 min on chemical composition, antinutritional factors, ruminal dry matter (DM) and crude protein (CP) degradability, and in vitro CP digestibility of canola seed (CS). Nylon bags of untreated or irradiated CS were suspended in the rumen of three bulls from 0 to 48 h. Protein subfractions of untreated and microwave irradiated CS before and after incubation in the rumen were monitored by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Microwave irradiation had no effect on chemical composition of CS (p>0.05). There was a linear decrease (p<0.001) in the phytic acid and glucosinolate contents of CS as irradiation time increased. Microwave irradiation for 2, 4 and 6 min decreased the phytic acid content of CS by 8.2, 27.6 and 48.6%, respectively. The total glucosinolate contents of CS microwave irradiated for 2, 4 and 6 min decreased by 41.5, 54.7 and 59.0% respectively, compared to untreated samples. The washout fractions of DM and CP and degradation rate of the b fraction of CP decreased linearly (p<0.001) as irradiation time increased. Microwave irradiation for 2, 4 and 6 min decreased effective degradability (ED) of CP at a ruminal outflow rate of 0.05 $h^{-1}$ by 4.7, 12.3 and 21.0%, respectively. Microwave irradiation increased linearly (p<0.001) in vitro CP digestibility of ruminally undegraded CS collected after 16 h incubation. Electrophoresis results showed that napin subunits of untreated CS disappeared completely within the zero incubation period, whereas cruciferin subunits were degraded in the middle of the incubation period (16 h incubation period). In 4 and 6 min microwave irradiated CS, napin subunits were degraded after 4 and 16 h incubation periods, respectively, and cruciferin subunits were not degraded untile 24 h of incubation. In conclusion, it seems that microwave irradiation not only protected CP of CS from ruminal degradation, but also increased in vitro digestibility of CP. Moreover, microwave irradiation was effective in reducing glucosinolate and phytic acid contents of CS.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.128-131
• /
• 2003

The effect of microwave irradiation on waste activated sludge was investigated in order to improve solubilization. a different levels of microwave irradiation time were varied within a range from 1 min to 15 min. When WAS was pretreated at 1, 3, 5, 7, and 15 min, the SCOD concentration increased according to microwave irradiation time. A simple batch procedure was used to measure the VFA potential, i.e. the amount of VFA that can be formed through digestion of organic constituent in sludge. At equilibrium point, TVFA in the case of 1, 3, 5, 7 and 15 min microwaved sludges was 8%, 122%, 243%, 279% and 232% higher than that in the case of raw sludge, respectively.

• 한국환경과학회지
• /
• 제17권5호
• /
• pp.493-500
• /
• 2008

This paper describes the adsorption/desorpton efficiency of a modified activated carbon by irradiated microwave to treat toluene. By employing microwave energy, the regeneration time was considerably shortened compared with conventional thermal heating regeneration. New adsorbent called ACB (Activated Carbon-Bentonite) was prepared from powder activated carbon with mixing bentonite as a binder. Specific surface area, average pore size and total pore volume of ACB were calculated from the nitrogen adsorption/desorption isotherm. The surface of ACB was characterized with scanning electron microscope(SEM). The results showed that the specific surface area, total pore volume, average pore size of ABC was not influenced by regenerating cycle with microwave irradiation. Toluene was adsorbed onto ACB which desorbed by MW irradiation. Absorption capacity of ACB was 0.117 $g_{toluene}/g_{ACB}$. Desorption efficiency of toluene increased as higher microwave output was applied.

• 한국염색가공학회지
• /
• 제10권4호
• /
• pp.7-14
• /
• 1998

Microwaves are high frequency radiation capable of generating very rapid, uniform and efficient heating of textile material. Microwave heated dyeing of polyester fabric was tried with different solvent systems, irradiation time and dye concentration. Microwave fixation methods were used with 100% water,30% urea, EG and DMF, respectively, pad-baths in which the padded fabrics were exposed over a heated or boiling water bath to maintain sufficient moisture content during irradiation. In order to ascertain the relation between the dyeing property of polyester fabric and the microwave irradiation condition caused by microwave heating, the K/S values and fastness properties of dyed fabrics such as light, washing and sublimation fastness were measured.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1957-1964
• /
• 2011

Various reaction conditions uding temperature, time and type and concentration of templates have been changed in order to facilely synthesize, especially with microwave (MW) heating, SAPO-34 molecular sieves. SAPO-34 molecular sieve can be synthesized rapidly with microwave irradiation from a gel containing tetraethylammonium hydroxide (TEAOH) as a template. However, other several templating molecules lead to SAPO-5 molecular sieve under microwave irradiation even though SAPO-34 is obtained by conventional electric synthesis from the same reactant gels. Moreover, SAPO-34 can be obtained more easily by increasing the TEAOH or silica concentration or by increasing the reaction temperature. SAPO-34 can be obtained within 5 min in a selected condition (high temperature of 210 $^{\circ}C$) with microwave heating, which may lead to a continuous production of the important material. SAPO-34 synthesized by microwave irradiation is homogeneous and small in size and shows acidity and a stable performance in the dehydration of methanol and 2-butanol to olefins, suggesting potential applications in acid catalysis.