• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.70-72
• /
• 2018

We propose a microwave signal generation system for brain stimulation. The existing brain stimulation system uses a signal of several tens of kHz, and the magnetic field distribution is wide. Microwave is used to locally limit the distribution of the electromagnetic field and to change the action potential of the cell with less power. The switch modulates the microwave signal to obtain a pulse envelope. The action potential of the cell can be controlled to the excitation/inhibition state by adjusting the repetition frequency. These results are confirmed by measuring the cell potential of the mouse brain.

• Journal of Magnetics
• /
• 제12권2호
• /
• pp.53-58
• /
• 2007

Theory of the generation linewidth of a current-driven spin-torque magnetic nano-oscillator in the presence of thermal fluctuations has been developed and a simple analytical formula for the generation linewidth in the supercritical regime of generation has been derived. It is shown that the strong dependence of the oscillator frequency on the precession power leads to substantial broadening of the generation linewidth of a spin-torque oscillator compared to the case of a linear oscillator, i.e. an oscillator with power-independent generation frequency. The relation between the nonlinearity-induced broadening of the generation linewidth and the nonlinearity-induced increase of the phase-locking band of a spin-torque oscillator to an external microwave signal has been revealed. The derived expression for the generation linewidth predicts a linewidth minimum when the nano-contact is magnetized at a certain angle to its plane, at which the nonlinear frequency shift vanishes. This result is in good agreement with recent experiments.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2006년도 제31회 학술논문발표회 초록집
• /
• pp.214-214
• /
• 2006

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.498-498
• /
• 2013

Atmospheric Pressure Plasmas have pioneered a new field of plasma for biomedical application bridging plasma physics and biology. Biological and medical applications of plasmas have attracted considerable attention due to promising applications in medicine such as electro-surgery, dentistry, skin care and sterilization of heat-sensitive medical instruments [1]. Traditional approaches using electronic devices have limits in heating, high voltage shock, and high current shock for patients. It is a great demand for plasma medical industrial acceptance that the plasma generation device should be compact, inexpensive, and safe for patients. Microwave-excited micro-plasma has the highest feasibility compared with other types of plasma sources since it has the advantages of low power, low voltage, safety from high-voltage shock, electromagnetic compatibility, and long lifetime due to the low energy of striking ions [2]. Recent experiment [2] shows three-log reduction within 180-s treatment of S. mutans with a low-power palm-size microwave power module for biomedical application. Experiments using microwave plasma are discussed. This low-power palm-size microwave power module board includes a power amplifier (PA) chip, a phase locked loop (PLL) chip, and an impedance matching network. As it has been a success, more compact-size module is needed for the portability of microwave devices and for the various medical applications of microwave plasma source. For the plasma generator, a 1.35-GHz coaxial transmission line resonator (CTLR) [3] is used. The way of reducing the size and enhancing the performances of the module is examined.

• The Plant Pathology Journal
• /
• 제26권3호
• /
• pp.286-288
• /
• 2010

Plant tissue homogenization using a mortar or mechanical equipment has been the preferred method for obtaining high yields of total RNA; this method, however, is both time-consuming and expensive. Additionally, homogenization may generate excessive endogenous RNases, polyphenolics, and other substances that reduce the quality and quantity of RNA. In this study, we describe the microwave irradiation-assisted RNA extraction (MIRE) technique which, without tissue disruption and homogenization, allows for the cost-effective and rapid generation of intact RNA from apple cane shavings and the reliable detection of apple virus by RT-PCR.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.180-180
• /
• 2012

A microplasma system source based on microwave parallel stripline resonator (MPSR) was developed for the generation of microplasmas in a wide range of pressure from some torr to 760 torr. This source was operated at its resonance frequency that much depends upon not only its discharge gap size but also operated pressure. This paper applied a simple circuit model to analyze the effects of discharge gap size and pressure to resonance frequency and impedance of MPSR in the cases with and without plasma exist inside the discharge gap. In the process of calculating, the conformal mapping method was used to estimate the capacitance of the MPSR. The calculating results by using circuit model agree well with the simulation results that using commercial CST microwave studio software.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.897-903
• /
• 2009

We have designed the backward wave oscillator. A power-pulsed generator oscillated at 24 GHz has higher frequency than current one. It is very inportant to prevent microwave from going into the beam diode, since intence microwave will harmfully affect beam generation. Due to the axial mode operation, there exist a critial value of beam energy for the oscillation. By changing the condition at the SWS end, an enhanced performance of the K-band oversized BWO is observed in a low magnetic field region about 0.8T.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.604-608
• /
• 1999

Semiconductor industry requires the development of new technology such as 300 mm technology, suitable for manufacturing the next generation dervices. A promising process for realizing 300 mm technology can be achieved by using enlarged microwave plasma chemical vapor deposition (MWCVD) technology. In this work, we used radial line slot antenna for enlarging microwave plasma area, and carried ut the deposition of polysilicon films using enlarged MWCVD for the first time in Korea. The results was as follows. Deposited polysilicon films showed various degrees of crystallinity as well as epitaxy to silicon substrates even at low temperature of $300^{\circ}C$. Deposition rates also controled crystallization behavior and slo deposition rates showed very high crystallinity. It could be said that enlarged MWCVD system and technology was worth to get attraction as one os future technologies for 1 G DRAM era.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.546-549
• /
• 2008

Institute of Space and Astronautical Science of Japan Aerospace Exploration Agency(ISAS/JAXA) successfully developed and operated the microwave discharge ion engines onboard Hayabusa asteroid explorer. The ${\mu}10$ ion engines feature the cathode-less plasma generation in both the ion generators and neutralizers with the results of long life and high reliability in space. Based on the space achievements of ${\mu}10$ ion engines with 8mN thrust, 3,000sec Isp and 350W consumption power, several programs are currently under developments: ${\mu}20$, ${\mu}10$HIsp and ${\mu}1$. The first is a 20-cm diameter microwave discharge ion engine, aiming to achieve 30mN/kW in the thrustto-power ratio for the asteroid sample return mission larger than Hayabusa. The second is a high Isp version of ${\mu}10$, and exhausts the plasma beam over 10,000sec Isp using 15kV acceleration voltage for deep space missions to such as Jupiter and Mercury. The third is ${\mu}1$ to be adapted to small satellites for drag-free.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.942-945
• /
• 2005

Micron-sized metal wires are widely used in industries such as filtration, catalyst and composite materials, etc. In the wire drawing process, the die that is used conventionally is an effective and, at the same time, sensitive component. However, a typical array of the dies has caused many problems in the wire drawing process, e.g., large frictional force on the interface between wire and the resulting high heat generation, precise adjustment of the dies, extended cooling system, die abrasion, etc.. Because of these problems, there have been many works that are aiming at improving the efficiency of wire drawing process by analyzing the die geometry and by applying advanced die material to prolong the die life or even at developing a dieless wire drawing system. This paper is dealing with developing a new wire drawing system that is applicable to reduce the wire drawing steps with high draw ratio. The new wire drawing system does not use the dies, but use the self-induced heater that works on the basis of the resonant phenomenon of wire material. The electromagnetic wave is the heating source. The results of the study on the diameter reduction and microwave flow analysis show that the heating effectiveness of the wire is influenced by the energy distribution in the microwave propagation chamber. We can obtain diameter-reduced wires by using microwave in the dieless drawing process. Microwave as a heating source is capable of producing wires without applying dies in wire drawing process.