• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.191-201
• /
• 2019

Petroleum industry produces one of the popular hazardous waste known as Petroleum Sludge. The treatment and disposal of petroleum sludge has created a major challenge in recent years. This review provides insights into various approaches involved in the treatment, and disposal of petroleum sludge. Various methods used in the treatment and disposal of petroleum sludge such as incineration, stabilization/solidification, oxidation, and bio-degradation are explained fully and other techniques utilized in oil recovery from petroleum sludge such as solvent extraction, centrifugation, surfactant EOR, freeze/thaw, pyrolysis, microwave irradiation, electro-kinetic method, ultrasonic irradiation and froth flotation were discussed. The pros and cons of these methods were critically considered and a recommendation for economically useful alternatives to disposal of this unfriendly material was presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1223-1232
• /
• 2008

In this paper, an analytic method is proposed to extract the reference slot admittance required for the design of a non-resonant waveguide edge slot array. A slot and two neighboring transmission line sections of the numerous alternately inclined slots with the identical inclination angle are modelled as a uniform lossy transmission line, and thus, the total ABCD matrix is easily calculated and compared with the simulated or measured one. From this procedure, the complex characteristic impedance and the complex propagation constant of the lossy transmission line are calculated and the normalized slot admittance is analytically obtained. In order to validate the proposed method, the admittance value of a reference slotted waveguide fabricated for designing the X-band edge slot array is extracted and it is compared with the one obtained by the other conventional method.

• Journal of Environmental Health Sciences
• /
• v.47 no.5
• /
• pp.496-503
• /
• 2021

Background: Considering the expenses of and difficulties in arsenic speciation by high performance liquid chromatography-inductively coupled plasma-mass spectrometry (HPLC-ICP-MS), alternative measurement methods should be useful, especially for large-scale research and projects. Objectives: A measurement method was developed for arsenic speciation using HPLC-atomic fluorescence spectrometry (HPLC-AFS) as an alternative to HPLC-ICP-MS. Methods: Total arsenic and toxic arsenic species in some seafoods were determined by atomic absorption spectrometry coupled with hydride vapor generation (AAS-HVG) and HPLC-AFS, respectively. Recovery rate of arsenic species in seafood was evaluated by ultra sonication, microwave and enzyme (pepsin) for the optimal extraction method. Results: Limits of detection of HPLC-AFS for As³⁺, dimethylarsinate (DMA), monomethylarsonate (MMA) and As⁵⁺ were 0.39, 0.53, 0.60 and 0.64 ㎍/L, respectively. The average accuracy ranged from 97.5 to 108.7%, and the coefficient of variation was in the range of 1.2~16.7%. As³⁺, DMA, MMA and As⁵⁺ were detected in kelp, the sum of toxic arsenic in kelp was 40.4 mg/kg. As³⁺, DMA, MMA and As⁵⁺ were not detected in shrimp and squid, but total arsenic (iAS and oAS) content in shrimp and squid analyzed by AAS-HVG were 18.1 and 24.7 mg/kg, respectively. Conclusions: HPLC-AFS was recommendable for the quantitative analysis method of arsenic species. As toxic arsenic species are detected in seaweeds, further researches are needed for the contribution degree of seafood in arsenic exposure.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.442-450
• /
• 2001

In this study, we collected PM10(particulate matter less than $10{\mu}m$) by using a high volume air sampler from March 2000 to September 2000 to investigate the contamination level and the distribution characteristics of heavy metals in the ambient air in Ulsan area. Samples were pretreated by the microwave extraction methods, and heaby metals (Cr, Cu, Zn, Cd, Ni, As, and Pb) were quantified by using and ICP-MS system. The highest PM10 concentrations in the ambient air were $85.6{\mu}g/m^3$ and the aberage value was $37.1{\mu}g/m^3$. The maximum levels of each heavy metal were as follows: $2.5{\mu}g/m^3$ for Fe(Yeocheon-dong), $0.41{\mu}g/m^3$ for Zn(Nammok-2-dong), $0.061{\mu}g/m^3$ for Cd(Yeocheon-dong), $0.20{\mu}g/m^3$ for Pb(Yeocheon-dong), $0.037{\mu}g/m^3$ for Ni(Yeoncheon-dong), $0.88{\mu}g/m^3$ for Cu(Yaeum-dong), $0.042{\mu}g/m^3$ for Cr(Yaeum-dong), and $0.015{\mu}g/m^3$ for As(Onsan). Among concentration of heavy metals, Ni and Zn compounds were highly correlated with a correlation coefficient of 0.87 at Nammok-2-dong.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.12
• /
• pp.1491-1496
• /
• 2007

As an oriental medicinal plant, wild grape (WG, Vitis coignetiae) has been known to contain abundant nutrients compared to grape (Vitis vinifera L.) and as a source of stilbenes, a kind of polyphenol. This study was performed to investigate the antioxidative activity of WG extracts by measuring electron donating ability (EDA), nitrite scavenging ability (NSA), super oxide dismutase (SOD)-like activity and total polyphenol content (TPC). The extracts were obtained using microwave-assisted extraction (microwave power: 90 W, extraction time: 5 min, extractant: water, 50 and 100% ethanol). EDAs, SOD-like activities and TPCs were the highest at 50% ethanol extracts while conversely lowest at 100% ethanol extracts. EDAs of 50% and 100% ethanol extracts at 1.6 g/dL concentration, $97.70{\pm}0.55\;and\;98.05{\pm}0.36%$, were higher than those of 0.1 and 1% L-ascorbic acids, $101.44{\pm}0.98%\;and\;99.43{\pm}0.78%$, respectively. At the concentration of 1.6 g/dL, 50% ethanol extract showed lower NSA (pH 1.2) than water extract unlike EDA, TPC and SOD-like activity. Regarding TPCs of WG extracts, the activities were the highest at 50% ethanol extracts (1.6 g/dL: $38.76{\pm}0.23$ mM gallic acid equiv.) followed by water and 100% ethanol extracts. The results suggest the usefulness of developing functional foods using antioxidative active compounds of WG with high polyphenol contents.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.57-62
• /
• 2011

Sometimes inhabitants in remote areas have inadequate or no access to modern medicines or medical services. They can get benefit in term of the treatment against malaria by cultivating selected breeding of A. annua and making teas or decoctions from the plant materials following the proper way of tea preparation. In order to have the maximum extraction efficiency for artemisinin, different ways of tea preparations of A. annua were investigated by applying the developed DPP method and described in this article. Tea was prepared by three different ways (cooking, without cooking with/without shaking and microwave oven) with different times. From the results, it has been found that higher concentration of artemisinin (84.7%) can be attained by following the approach for tea preparation without cooking with shaking for 15 minutes (R.S.D. 2.34%). The concentration of artemisinin decreases with cooking more than 1.5 min in microwave oven. The utmost extraction (88.9% of artemisinin) is possible to extract by shaking with boiled 5% ethanol in distilled water (R.S.D. 2.28%).

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.192-198
• /
• 2023

In this study, the components of microwave-assisted extracts obtained from Thuja orientalis leaves were analyzed, and the cytotoxicity, antibacterial and antiviral activities were evaluated. The predominant components from microwave-assisted extraction were catechin, leucopelargonidin, arecatannin, quinolone, and kaempferol derivatives, which are classified in the flavonoid and tannin groups. We observed that the 0.11 mg/mL of extract concentration did not show cytotoxicity in HaCaT cells. The antibacterial activities were tested according to the guidelines of methods for determining the bactericidal activity of antimicrobial agents. The extracts showed 99.9% antibacterial efficiency against gram-positive S. aureus, while the antibacterial effect on gram-negative E. coli was insignificant. When the extract concentration and contact time with bacteria were increased, 99.9% antibacterial efficiency was observed for E. coli as well as S. aureus. Following the standard to assess the activity of microbicides against viruses in suspension (ASTM-E1052-20), the antiviral efficiency was more than 99.99% for influenza A (H1N1) and SARS-CoV-2. These results suggest its potential use in antiviral disinfectants, surface coatings, personal protective equipment, and textiles.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.440-446
• /
• 2005

A method is described for the determination of dibutyltin (DBT) in sediment by isotope dilution using liquid chromatography inductively-coupled plasma/mass spectrometry (LC-ICP/MS). To achieve the highest accuracy and precision, special attentions are paid in optimization and evaluation of overall processes of the analysis including extraction of analytes, characterization of the standards used for calibration and LC-ICP/MS conditions. An approach for characterization of natural abundance DBT standard has been developed by combining inductively-coupled plasma/optical emission spectrometry (ICP/OES) and LC-ICP/MS for the total Sn assay and the analysis of Sn species present as impurities, respectively. An excellent LC condition for separation of organotin species was found, which is suitable for simultaneous DBT and tributyltin (TBT) analysis as well as impurity analysis of DBT standards. Microwave extraction condition was also optimized for high efficiency while preventing species transformation. The present method determines the amount contents of DBT in sediments with expanded uncertainty of less than 5% and its result shows high degree of equivalence with reference values of an international inter-comparison and a certified reference material (CRM) within stated uncertainties.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.63-70
• /
• 2016

In this study, ash free coals(AFCs) were produced with lignite and anthracite coals in a microwave. The AFCs were analyzed with proximate analysis, fourier transform infrared spectrometry (FTIR), X-ray diffraction analysis, and thermogravimetric analysis (TGA). The extraction yields of the AFCs were 16.4 wt%, 7.6 wt% at lignite and anthracite coal, respectively. The chemical and physical properties of the AFCs were similar regardless of the original coal types. Oxidation behavior of the AFCs was investigated by supplying a mixture of 3g of AFC and 3g of electrolyte into the coin-type molten carbonate fuel cell (MCFC). For the evaluation of AFC fuel performance, electrochemical analysis of the steady-state polarization and step-chronopotentiometry were conducted based on the standard hydrogen fuel (69 mol% $H_2$, 17 mol% $CO_2$, 14 mol% $H_2O$). The AFCs showed similar electrochemical oxidation behaviors regardless of the original coal types. The overvoltage of the AFCs was larger than the hydrogen fuel, although OCV of the AFCs was higher.

• Journal of the Korean Society of School Health
• /
• v.21 no.2
• /
• pp.89-95
• /
• 2008

Purpose: The purpose of this study is to investigate the heavy metal pollution of playgrounds of elementary schools in the Ulsan Metropolitan City. Soil pollution is one of the most dangerous problems of the utmost concern to both children and teachers. The result of this study would be an educational datum for improving children's health and establishing educational policy. Methods: For the analysis, fifteen representative schools were selected from five sample areas such as Dong-gu, Nam-gu, Jung-gu, Buk-gu and Ulju-gun of the Ulsan city. And from each school playground, soil was extracted from five spots and mingled into one sample. These fifteen samples were pretreated by the microwave extraction method, and the extracted heavy metals(As, Cd, Cu, Pb, Cr⁶⁺, Zn and Hg) were quantified by the ICP(Inductively Coupled Plasma) system. Results: The results of the analysis shows that the level of heavy metal pollution of elementary school playgrounds in Ulsan city did not exceed the permitted limit of each heavy metal. This means that the soil pollution of playgrounds in the Ulsan Metropolitan City is not so serious as it is expected. But it should be added that the soil is not too safe to be ignored.