• 제목/요약/키워드: Microwave assisted

검색결과 214건 처리시간 0.031초

Electrochemical Properties of Li[Ni0.2Li0.2Mn0.6]O2 by Microwave-assisted Sol-gel Method

  • Park, Yong-Joon;Kim, Seuk-Buom
    • Transactions on Electrical and Electronic Materials
    • /
    • 제10권3호
    • /
    • pp.102-105
    • /
    • 2009
  • $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ cathode materials have been synthesized by a microwave-assisted sol-gel method. The structure and electrochemical properties of $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ were studied by X-ray difftactometry (XRD), scanning electron microscopy (SEM) and charge-discharge cycler. The powder prepared by microwave assisted sol-gel method showed good crystallinity and well-defined facet shapes. The $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ electrode delivered a high discharge capacity of 230 $mAhg^{-1}$ at the specific current of 40 $mAg^{-1}$ (0.2 C rate) in the voltage range of 2.0${\sim}$4.8 V. About 60 % of the discharge capacity measured at 0.2 Crate (140 $mAhg^{-1}$) was maintained at a 6 C (1200 $mAg^{-1}$)rate. The cyclic property was also stable and it did not deteriorated at a high Crate.

Application of the Microwave-assisted Process to the Fast Extraction of Isoflavone from the Waste Residue of the Soybeans

  • Hua, Li;Guoqin, Hu;Dan, Li
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권11호
    • /
    • pp.2687-2690
    • /
    • 2009
  • Due to the importance of isoflavone content in soybean extracts, the microwave-assisted process (MAP) was compared to the conventional extraction methods. For comparison of the three methods, all extraction parameters (solvent, sample to solvent ratio, temperature, etc.) were kept the same; the microwave extractor was operated at 187.5 W with an emission frequency of 2450 MHz under atmospheric pressure conditions and the extractions were carried out at 75 ${^{\circ}C}$ for 3 min while the conventional reflux was at 75 ${^{\circ}C}$ for 3 h. Total yield and crude isoflavone content were determined by ultraviolet spectrophotometric and compared with the three methods. Results indicated that the MAP was comparable to the conventional method in its capability to extract target compounds without causing any degradation; in addition it dramatically reduced the extraction time from 3 h to a few minutes, suggesting that it can be an alternative technique to the time-consuming conventional reflux method.

상압조건의 마이크로웨이브 공정을 위한 인삼성분의 추출조건 설정 (Pre-establishment of Microwave-Assisted Extraction Under Atmospheric Pressure Condition for Ginseng Components)

  • 김경은;이기동;권중호
    • 한국식품과학회지
    • /
    • 제32권2호
    • /
    • pp.323-327
    • /
    • 2000
  • 인삼가공제품의 원료로 사용되는 가용성 인삼성분의 신속한 추출방법을 개발하기 위한 기초연구로서, 기존 추출 방법들에 비해 환경친화적이고 경제적인 장점이 알려진 마이크로웨이브(2450MHz)의 추출조건을 조사하였다. 가용성 인삼성분의 추출에서 백미삼 원료의 입자크기는 60 mesh, 시료 대 용매비는 1 : 10(g/mL)이 각각 적당하였고, 마이크로웨이브 에너지는 100 W 이하에서 인삼성분의 추출이 용이하였다. 가용성 성분의 수율은 60% 에탄올을 용매로 하여 5분간 1회 추출시 약 83%, 5회 반복 추출시에는 사포닌 성분을 포함한 대부분의 가용성 성분을 추출할 수 있었다.

  • PDF

Solvent-Free Michael Addition Between EMME and Secondary Amine under Focused Microwave Irradiation

  • Kim, Ki-Won;Lee, Hee-Jung;Jo, Jeong-Im;Kwon, Tae-Woo
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권5호
    • /
    • pp.1155-1158
    • /
    • 2010
  • Microwave-assisted Michael reaction between EMME and various amines such as diphenylamine, 4-methyl-N-phenylbenzenamine, N-phenylnaphthalen-1-amine, dihexylamine, diisopropylamine, and 4-nitrobenzenamine were described. Solvent-free conditions on alumina as solid support in the presence of $K_2CO_3$ catalysts gave moderate to good yields (55 - 93%) of diethylmalonate analogues having enamine moieties under focused microwave irradiation.

Microwave Energy를 이용한 오염토양에서 Phenol의 추출 (Extraction of Phenol from the Contaminated Soil Using Microwave Energy)

  • 이기환;이태호;김윤아
    • 한국환경과학회지
    • /
    • 제12권4호
    • /
    • pp.447-459
    • /
    • 2003
  • This study was carried out to develop an efficient process far the elimination of phenol pollutant from soils. An microwave-assisted process (MAP) and a conventional Soxhlet extraction method (SEM) were employed to extract phenol from two types of soils. The effects of extraction methods, aged time of the spiked soil samples, extraction solvent and extraction time on the extraction performance were compared. Our results demonstrate that the recoveries from standard soil spiked were at least 10% higher fer MAP than these f3r the conventional Soxhlet. The extraction time by MAP requires significantly shelter time (1 min) than 15 h of the conventional Soxhlet. The recoveries from non-contaminated soil spiked with phenol were also almost identical f3r above results. The reduction of the extraction times with efficiency higher than that afforded by the conventional Soxhlet technique supports the suitability of the MAP method.

Microwave-Assisted Cationic Ring-Opening Polymerization of Cyclic Imino Ethers

  • Hoogenboom Richard;Schubert Ulrich S.
    • 한국고분자학회:학술대회논문집
    • /
    • 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
    • /
    • pp.199-199
    • /
    • 2006
  • Microwave-irradiation has become a common heat source in organic chemistry in the last decade. In recent years, polymer chemists also discovered the advances of microwave heating that include fast and efficient heating as well as the homogeneous heat profile and the easy access to pressurized reaction conditions. In this contribution, we report our investigations on the cationic ring-opening polymerization of 2-oxazolines that lead to a tremendous acceleration from several days to several minutes polymerization time. In addition, the optimized microwave-assisted polymerization procedure was applied for the preparation of libraries of diblock and triblock copolymers that were used for the determination of structure-property relationships in poly(2-oxazoline)s.

  • PDF

마이크로파-폴리올법을 이용한 고분자 전해질 연료전지용 Pt/MWCNTs 촉매의 제조 및 이의 특성분석 (Synthesis and Study of Pt/MWCNTs Catalysts by Using Microwave Assisted Polyol Method for PEM Fuel Cells)

  • 이태규;허승현
    • 전기화학회지
    • /
    • 제15권4호
    • /
    • pp.264-269
    • /
    • 2012
  • 본 연구에서는 50 wt%에 달하는 매우 높은 Pt 담지량에서도 장기내구성이 우수한 연료전지용 Pt/MWCNT 촉매를 마이크로파를 이용한 폴리올법을 이용하여 제조하였다. X선 회절분석법과 투과전자현미경 분석결과 마이크로파 조사시간이 늘어남에 따라 Pt의 크기가 증가하였다. 마이크로파 조사시간이 10분, 20분, 30분일 경우 Pt 크기는 각각 4.1, 4.9, 8.5 nm로 나타났다. 마이크로파를 사용하지 않은 기존 폴리올 방법에 의해 제조된 촉매와 비교하였을 경우 Pt 분산도와 장기내구성이 증가한 것으로 나타났다.