• Title/Summary/Keyword: Microstrip resonator

Search Result 225, Processing Time 0.031 seconds

Analysis of a Microstrip Substrate-Mounted Dielectric Resonator Using FDTD Method (FDTD 법을 이용한 마이크로 스트립 기판위의 유전체 공진기 해석)

  • 오순수;안규철;최병하
    • Proceedings of the IEEK Conference
    • /
    • 1999.06a
    • /
    • pp.881-884
    • /
    • 1999
  • In this paper, resonant frequency, electromagnetic field distribution, and resonant mode of a microstrip substrate-mounted dielectric resonator are investigated. A dielectric resonator is excited by the microstrip line. The data are obtained using the finite difference time-domain (FDTD) and compared with the experimental results and theoretical solutions the previous published paper.

  • PDF

Microstrip Resonator with Q Factor and High Second Harmonic Suppression (Q값과 2차 고조파 하모닉 억압 특성을 개선한 마이크로스트립 공진기)

  • Go Min-Ho;Park Hyo-Dal;Kim Chun-Suk
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.9 s.100
    • /
    • pp.909-916
    • /
    • 2005
  • This paper describes that the Q factor of a conventional $\lambda$/4-microstrip resonator with short load can be improved and also the problem that the serial-resonant frequency(2$f_o$) should be deviated from can be settled by the proposed $\lambda$/4-microstrip resonator, which is used to suppress the harmonics of a nonlinear circuit.

Oscillator with High Harmonic Suppression Using Split Quarterwave Microstrip Resonator

  • Cho, Ho-Yun;Go, Min-Ho;Jo, Yun-Hyun;Park, Hyo-Dal
    • ETRI Journal
    • /
    • v.33 no.1
    • /
    • pp.125-127
    • /
    • 2011
  • This letter presents a new type of resonator, namely, the split quarterwave microstrip resonator (SQMR), to improve the poor harmonic suppression and low Q-factors in conventional quarterwave microstrip resonators. An oscillator incorporating the proposed SQMR is designed, fabricated, and tested to demonstrate that, not only the second harmonic suppression, but also the phase noise of the oscillator can be improved. The oscillator with the SQMR shows improved second harmonic suppression of -74.59 dBc and phase noise figure of merit of -169.77 dBc/Hz at 1 MHz offset.

Low Phase Noise Push-Push VCO Using Microstrip Square Open Loop Resonator and Tunable Negative Resistance (마이크로스트립 사각 개방 루프 공진기와 가변 부성 저항을 이용한 저위상 잡음 Push-Push 전압 제어 발진기)

  • Choi, Jae-Won;Seo, Chul-Hun
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.18 no.8
    • /
    • pp.847-853
    • /
    • 2007
  • In this paper, a novel push-push voltage-controlled oscillator(VCO) using microstrip square open loop resonator and tunable negative resistance is presented. The microstrip square open loop resonator has the large coupling coefficient value, which makes a high Q value, and has reduced phase noise of VCO. The VCO with 1.8V power supply has phase noise of $-124.67{\sim}-122.67dBc/Hz\;@\;100 kHz$ in the tuning range, $5.744{\sim}5.859 GHz$. The FOM of this VCO is $-202.83{\sim}-201dBc/Hz\;@\;100 kHz$ in the same tuning range. When it has been compared with single-ended VCO using microstrip square open loop resonator, and push-push oscillator using microstrip line resonator, the reduced phase noise has been -8.51dB, and -33.67dB, respectively.

Low Phase Noise VCO using Microstrip Square Open Loop Split Ring Resonator (마이크로스트립 사각 개방 루프 SRR(Split Ring Resonator)를 이용한 저위상 잡음 전압 제어 발진기)

  • Choi, Jae-Won;Seo, Chul-Hun
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.44 no.12
    • /
    • pp.22-27
    • /
    • 2007
  • In this paper, a novel voltage-controlled oscillator (VCO) using the microstrip square open loop split ring resonator (OLSRR) is presented for reducing the phase noise. For this purpose, the square-shaped split ring resonator (SRR) haying the form of the microstrip square open loop is investigated. Compared with the microstrip square open loop resonator, the microstrip square OLSRR has the larger coupling coefficient value, which makes a higher Q value, and has reduced the phase noise of VCO. The VCO with 1.7V power supply has the phase noise of $-120\sim-116.5$ dBc/Hz @ 100 kHz in the tuning range, $5.746\sim5.854$ GHz. The figure of merit (FOM) of this VCO is $-200.33\sim-197$ dBc/Hz @ 100 kHz in the same tuning range.

Novel Oscillator Incorporating a Compact Microstrip Ring Type Resonant Cell with High Efficiency and Superior Harmonic Characteristics

  • Hwang Cheol-Gyu;Myung Noh-Hoon
    • Journal of electromagnetic engineering and science
    • /
    • v.5 no.2
    • /
    • pp.92-96
    • /
    • 2005
  • This paper presents a novel microwave oscillator incorporating a simple microstrip ring type resonant cell as its terminating resonance component. Reduced chip size, higher dc-ac power efficiency, superior harmonic characteristics can be achieved from the introduction of a compact microstrip ring resonator cell. The oscillator provides a second harmonic suppression of 26.51 dB and the output power of 2.046 dBm at 2.11 GHz.

Fabrication and Characterization of Miniaturized HTS Microstrip Antennas Using "H"-type Resonator (H 형태 공진기를 이용한 소형화된 HTS 안테나의 제작 및 특성 해석)

  • 정동철;윤창훈;황종선;최창주
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.52 no.7
    • /
    • pp.282-287
    • /
    • 2003
  • ″H″ type resonator has the advantage for the miniaturization of high-T7 superconducting (HTS) microstrip antenna in comparison with the conventional microstrip antenna such as rectangular type or circular type. In this paper we designed miniaturized HTS antennas using this "H"-type resonator and reported the characteristics of our antennas including return loss, bandwidth, radiation patterns, efficiency and so on. To fabricate the "H" type antenna, HTS YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) thin films were deposited on MgO substrates using rf-magnetron sputtering. For comparison between normal conducting antennas and superconducting antennas, the gold antennas with the same dimension were also fabricated. An aperture coupling was used for impedance matching between 50 $\Omega$ feed line and HTS radiating patch. The ″H" type superconducting antenna showed the performance of 1.38 in SWR, 26 % in efficiency, and 13.8 dB in the return loss superior to the normal conducting counterpart.

A Study on the Microwave Oscillator Using the Slot-Line Resonator (스롯트선로 공진기를 이용한 마이크로파 발진기에 관한 연구)

  • 장익수;김기영
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.16 no.1
    • /
    • pp.33-39
    • /
    • 1979
  • The resonance frequency of the slot-line resonator in the shielding box is analyzed. It is verified experimentally that an X-Band oscillator may be realized by the resonator in the microstrip circuit mount as a shielding cavity, and by shunt-connecting the IMPACT diode on the slot-line, And the oscillating power can be coupled with the microstrip by the coupling aperure on the opposite surface of the microstrip by the coupling aperure on the opposite of the substrate of the microstrip cirsuit.

  • PDF

Miniatured Planar Bandpass Filter Using Coupled Metamaterial Resonators

  • Kim, Gi-Rae
    • Journal of information and communication convergence engineering
    • /
    • v.9 no.3
    • /
    • pp.256-259
    • /
    • 2011
  • In this article, new microstrip slow-wave bandpass filters using open loop resonator loaded with inter-digital capacitive fingers is proposed. The filter features not only compact in size, but also exhibits spurious stop-band rejection. Filters of this type with elliptic function and Chebyshev response are demonstrated. There is good agreement between experimental and full-wave electromagnetic (EM) simulation results.