• 한국의류학회지
• /
• 제27권11호
• /
• pp.1300-1306
• /
• 2003

Cotton fibers were treated, with 1, 2, 3, 4-butanetetracarboxylic acid (BTCA) which is formaldehyde-free reagent to impart durable press performance. The dyeability, dyeing rate, and diffusion coefficient, of BTCA treated cottons were compared to prove the changes of pore size structure using direct dyes and disperse dyes. Diffusion coefficients of BTCA treated cotton fibers were determined at acidic conditions to figure out the effect of swelling. Since the dyeability of BTCA treated cotton fibers dyed with direct dyes were reduced, it is considered that the dyeability to direct dyes is related to the quantity of residual large pores. But, the dyeability to disperse dyes were increased due to the less reduction of small pore sizes and the increase of hydrophobicity in BTCA treated cotton cellulose. The dyeability to direct dye and disperse dye were decreased more at acidic conditions than at neutral conditions. It seemed that the swelling of pores in the fiber were inhibited.

• 공업화학
• /
• 제5권1호
• /
• pp.105-113
• /
• 1994

Spherocarb와 Sucrose Char에 의해 흡착된 질소가스의 양은 온도를 77K에서 184K가지 일정하게 유지시키면서, 상대적 압력의 함수로서 측정되었다. 다른 온도에서의 Isotherm은 흡착제를 일정한 온도에서 유지시키면서, 액화질소, iso-펜탄, n-펜탄, 에틸알코올과 iso-프로필 알코올의 Slush bath를 사용하여 얻어졌다. 이 연구의 목적은 BET와 D-R 같은 흡착모델을 사용하여, 실험적 데이타를 분석함으로써, 비표면적과 세공부피에 대한 정보를 얻는데 있다.

• Carbon letters
• /
• 제8권1호
• /
• pp.30-36
• /
• 2007

Oxidized PAN (OXI-PAN) fibers were used for the precursors of activated carbon fiber in study. How drying temperature affected the properties of carbon fibers on activating process of carbon fibers was investigated. The specific surface areas of activated carbon fibers have been determined on a series of chemically activated carbons with KOH and NaOH. The experimental data showed variations in specific surface area, iodine and silver adsorptions by the activated carbon fibers. The amount of iodine adsorption increases with increasing specific surface areas in both activation methods. This was because the ionic radius of iodine was smaller than the interior micropore size of activated carbon fibers. Silver adsorbed well in NaOH activated carbon fibers rather than KOH activated carbon fibers in this study.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.92-100
• /
• 1996

Amorphous alumina(AA) the precursor of ${\gamma}$-alumina for catalyst support was made in the newly designed ball filled heating column. Some properties of AA as precursor were investigated. In observation of microstruc-ture and pore structure of AA and its derivatives scanning electronic microscope(SEM) and transmission electronic microscope(TEM) were used. It was found that the width of one particle in AA was 45~60$\AA$ and the average distance among the particles ranged 9~12 $\AA$ which suggested a micropore structure. When AA was reacted with water the shape of the surface was found to be altered and acicular bioehmite was formed inside AA which contributed inproved formability. Pore distribution was evaluated for the three samples of AA ground and granulated lump and La2O3 coated alumina. Acid sites were quantitatively determined by ammonia TPD method and the effect of impurity of Na on acid sites was discussed. Water adsorption capacity was evaluated in terms of a desiccant.

• Journal of Plant Biology
• /
• 제5권2호
• /
• pp.1-5
• /
• 1962

Attempts were made in order to make clear the meiotic irregularities, male gametophyte formation and spermatogenesis for the purpose of applying these embryological facts to taxonomic works. Followings are the results obtained : 1. Meiosis is extremely irregular, giving rise to giant, micro, and empty, pollens. Meiotic division in each PMC is observed synchronizing. 2. In the microspore immediately before the vegetative-generative nuclear division, the nucleus locates appressed to the inner wall, most of the other part of the cell being occupied by large vacuoles. 3. Spindle symmetry in the microspore nuclear division is of intermediate type. 4. Nuclear divisions in each micropore are not synchronized as in meiosis. 5. Generative nucleus is located in close contact with the inner wall, while the vegetative nucleus occupies the central part of pollen grain. The pollen in this stage looks somewhat like broad bean. Afterward the generative nucleus loses contact with the wall, the nuclear shape changing from lenticular to roundsh. 6. The generative nucleus in fully matured pollen grain usually takes the shape of crescence, those in abortive pollen, lenticular or ellipsoidal, etc.

• Environmental Engineering Research
• /
• 제9권5호
• /
• pp.193-200
• /
• 2004

A study of the treatment of piggery wastes using a multilayered metal-activated carbon system followed by carbon bed filtration was carried out at bench scale. From the physicochemical properties obtained from samples treated with aqueous solutions containing metallic ions such as Ag$^+$, Cu$^{2+}$, Na$^{-}$, K$^+$ and Mn$^{2+}$, main inspections are subjected to isothem shape, pore distribution with micropore, SEM and EDX. Multilayered metal-activated carbons were contacted to waste water to inwestigate the simultaneous catalytic effect for the COD, BOD, T-N and T-P removal. From these removal performance was achieved. The high efficiency of the multilayered metal-activated carbon bed, satisfactory removal performance was achieved. The high efficiency of the multilayered metal-activated carbon bed was derermined by the properties of this material for trapping, catalytic effect and adsorption of organic solid particles.

• Carbon letters
• /
• 제5권2호
• /
• pp.51-54
• /
• 2004

Isotropic pitch-based carbon fiber was isothermally activated in $CO_2$ atmosphere. Structural parameters of the isotropic carbon fibers and activated carbon fibers (ACFs) were evaluated by X-ray diffraction (XRD). The $d_{002}$ and La of the carbon fibers were measured to be 4.04 ${\AA}$ and 23.6 ${\AA}$ and those of ACFs were 4.29 ${\AA}$ and 22.7 ${\AA}$, respectively, representing less ordered through activation process. The pores in the ACFs were characterized by BET, and they showed super-high specific surface area of maximum value 3,495 $m^2/g$ from average pore size of 8.3 ${\AA}$ at 59% burn-off. It was recognized that 8-9 ${\AA}$ was optimum range of pore size for efficient creation of high specific surface area. The average size of the pores formed at higher temperature ($1100^{\circ}C$) was larger than that of the pores formed at lower temperature ($900^{\circ}C$).

• Carbon letters
• /
• 제7권1호
• /
• pp.9-18
• /
• 2006

Activated carbons were obtained by activating wild cherry stones with different concentrations of phosphoric acid or zinc chloride at different temperatures. The adsorption of $N_2$ at 77 K and of $CO_2$ at 273 K was followed and the data were analyzes by considering different adsorption models. The activated carbons obtained measured high surface area with the most of the surface in all samples located in micropores. Fair agreement was found between the nitrogen surface areas calculated from the BET-, t-, ${\alpha}$- and DR- methods, although the first three are based on surface coverage whereas the latter is based on micropore filling. The carbon dioxide surface areas calculated by the DA equation were smaller than the comparable nitrogen areas. This was ascribed to domination of surface coverage mechanism, the absence of activated diffusion process. Based on this explanation the $CO_2$-surface areas as calculated by DA equation should be taken with great reservation.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.29-36
• /
• 1991

Microporous glasses in the system TiO2-SiO2-Al2O3-B2O3-CaO-Na2O were prepared by the phase-separation technique. Morphology and distribution of pore and specific surface area of glasses heated and leached out at various conditions were investigated by SEM and Porosimeter. Crystallization of glasses heated above transition temperature was also inspected by X-ray diffraction method. When the heating temperature and time increased, the pore size and volume increased, but the specific surface area decreased above the critical temperature. The phase-separation, specific surface area and pore size showed more sensitive change on the variation of heating temperature than of heating time. The specific surface area and micropore volume of porous glasses prepared in this study were about 120-330$m^2$/g and 0.001-0.01cc/g, respectively. Mean pore size of porous glasses were about 20-90$\AA$. Anatase phases was deposited when the parent glass was heat-treated at 75$0^{\circ}C$ for 6hrs.

• Bulletin of the Korean Chemical Society
• /
• 제24권10호
• /
• pp.1437-1443
• /
• 2003

Thermal decomposition of hydrated surface layer of $Mg(OH)_2$ at $500^{\circ}C$ in vacuum turned non-porous MgO into porous one with high surface area of around $270 m^2$/g. Most of its surface area, 74 %, was from micropores, and rest of it was from mesopores in wedge-shaped slits, exhibiting bimodal size distribution centered around 30 and 90${\AA}$. Rehydration followed by subsequent dehydration at $300 ^{\circ}C$ in dynamic vacuum further raised the surface area to 340 $m^2$/g. Fraction of microporous surface area was increased to 93%, and the shape of the mesopores was modified into parallel slits with a specific dimension of 32 ${\AA}$. Application of $Fe_2O_3$ over MgO via iron complex formation did not alter the pore characteristics of MgO core, except slightly increased pore dimension. Over the course of the modification, $Fe_2O_3$ stayed on the surface possibly via spill-over reaction.