• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.27-32
• /
• 1984

When chopped light inpinges on some condenced matters such as HgS, HgI2 and GaSe semiconductors, in an enclosed cell, the acoustic signals are produced within the cell. These acoustic signals were detected by using a gas-phase microphone in order to investigate the physical properties of the samples. In order to carry out investigation, PA-cell was first designed and made so as to produce higher sensitivity to acoustic signals. Second, an analysis of the photoacoustic spectrum of the various compounds was carried out to obtain the intensity of the PA-signal in terms of light wavelength and to calculate the energy band gaps occuring according to energy transitions. The agreement between the results obtained by this conventional PAS technique and the results obtained by the optical spectrum method was good. In additional analysis conducted on the basis of the R-G theory and the Sze theory are capable of determining the characteristics of energy transition of semiconductors.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.328-335
• /
• 2005

This paper proposes a frequency domain independent component analysis (ICA) algorithm to separate the mixed speech signals using a multiple microphone array By estimating the delay timings using a input cross-correlation, even in the delayed mixture case, we propose a good initial value setting method which leads to optimal convergence. To reduce the calculation, separation process is performed at frequency domain. The results of simulations confirms the better performances of the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.54-56
• /
• 2005

Analysis of the voice and its corresponding studies are examined from the recording of the voice through microphone and various calculation processes of the signals by using computer. Voice analyser include data acquisition and analyzing program. Since oath program uses different voice signal processing algorithm, thorough understanding of the operation is essential. In this study, analysis result of patient voice were compared by using four different voice analysis programs such as MDVP, Praat, TF32, and the program developed in this study. Pitch, jitter and shimmer were selected as comparison analysis factors. As a result, pitch, jitter and shimmer showed different result since each program uses different pitch computation algorithm.

• Speech Sciences
• /
• v.15 no.3
• /
• pp.17-28
• /
• 2008

In many practical applications of robots, finding the location of an incoming sound is an important issue for the development of efficient human robot interface. Most sound source localization algorithms make use of only those microphones that are acoustically visible from the sound source or do not take into account the effect of sound diffraction, thereby degrading the sound source localization performance. This paper proposes a new sound source localization method that can utilize those microphones that are acoustically shadowed from the sound source. The experiment results show that use of the acoustically shadowed microphones, which receive higher signal-to-noise ratio signals than the others and are closer to the sound source, improves the performance of sound source localization.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.426-430
• /
• 2001

Conventional smart foam is not applicable to active noise control in a duct having flow. Thus, this paper presents a ring-type smart foam as an alternative. The ring-type smart foam consists of polyurethane acoustic foam of lining shape and PVDF film embedded in the foam. The embedded PVDF element acts as an actuator to reduce noise at lower frequencies and the foam absorbs noise at higher frequencies. A feedforward adaptive filtered-x LMS controller is used to minimize the signal from the error microphone. Experiments are executed to reduce broadband and tonal noise.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.695-698
• /
• 1999

Passive noise reduction is a classical approach to attenuate industrial noise. But Active noise cancellation has several advantages over the passive noise cancellation. Such a system offers a better low frequency performance with a smaller and lighter system. This paper presents an active closed loop control system which consists of an controller for inverting and compensating the phase delay, an microphone for picking up the external noise, and loudspeaker for radiating the acoustic anti-phase signal to reduce external noise. The noise in the phase delay covered from 80$^{\circ}$ to 270$^{\circ}$ tends to be reduced. The degree of noise cancellation obtainable with this system reaches value about 17㏈.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.7
• /
• pp.499-507
• /
• 2003

This paper presents a method for active noise control (ANC) in a duct by using a ring-tyPe smart foam. The ring-type smart foam consists of an elastic porous material of lining shape and a PVDF film embedded In the material. The PVDF element acts as a secondary sound source to reduce the noise. Active noise control using a ring-type smart foam is only effective locally because of the way to excite radially. To enlarge the quiet zone, the duct Is lined with additional acoustic foam between the smart foam and the error microphone. When cancellation path ks optimized by the LMS/RLS algorithm, the computation power is reduced while control performance Is maintained. The filtered-x LMS algorithm is used to minimize the error signal.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.172-176
• /
• 2013

This paper presents a modified filtered-x least mean square (FxLMS) algorithm to improve the stability of active noise control (ANC) system in realistic environment. A real-time ANC system employing modified FxLMS is designed and implemented on digital signal processor (DSP) board. The ANC system is evaluated for cancelling various tonal frequency noises in the range from 100 to 500 Hz and the performance is measured in terms of sound pressure level (SPL) attenuation. Experiment results show that a quiet zone with maximum 20 dB SPL attenuation can be generated around the location of error microphone.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.640-644
• /
• 2010

When we talk with hands-free in a car or noisy lobby, the performance of the echo canceller degrade because background noise added to echo caused by the distance from mouth to microphone is relatively long. It gives a reason for necessity of noise-robust and high convergence speed adaptive algorithm. And if acoustic echo canceller operated not perfectly, residual signal going through the echo canceller to far-end speaker remains residual echo, which degrade quality of talk. To solve this problem, post-processing needed to remove residual echo ones more. In this paper, we propose a new acoustic echo canceller, which has noise robust and high convergence speed, linked with linear predictor as a post-processor. By computer simulation, it is confirmed that the proposed algorithm shows better performance from acoustic interference cancellation (AIC) viewpoint.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.5
• /
• pp.431-437
• /
• 2013

Measured acoustic signal from operating high speed train contains frequency change called doppler shift due to its motion. To avoid this doppler shift wind tunnel test is required. But scaledown of model can cause change of source characteristics. And measurements using some part of train cannot reproduce real flow condition. The best way to recognize real noise source characteristics is measurement from operating high speed train but doppler shift makes it hard. So, we developed simple dedopplerization technique for one microphone and applied to field test data of high speed train. Through this, we could capture real frequency of noise from operating high speed train.