• 소음진동
• /
• 제5권2호
• /
• pp.197-206
• /
• 1995

Microphone array is designed to measure the equivalent source height of vehicle noise. The equivalent source position is defined for an arbirary distribution of acoustic sources above a perfectly reflecting plane and a microphone array for its measurement is developed. The normalized errors of the measured equivalent source heights are defined including the effects of background noise, the geometric near field, and source size. Normalized errors of the measured source heights obtained by a nemerical simulation for each parameter lead to optimization of the microphone spacing and to the design of an array which gives the equivalent source height as a function of frequency. The performance of the designed array is verified using the stationary loudspeaker experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.266-269
• /
• 1999

An electronically Scannable microphone system is in the Planning stage. For this Purpose, a multiple microphone array with controllable delay is available. To achieve effective point-listening characteristics, we proposed an enclosed microphone array system with a complex weighting method. In this system, both the microphone arrangement and the value of the complex weighting are important. In this report, the construction of microphone array system and the signal-processing method are explained, and the calculation method for optimal complex weighting is also presented. A prototype experimental setup is designed and fabricated to verify the expected characteristics.

• 한국음향학회지
• /
• 제4권1호
• /
• pp.35-42
• /
• 1985

This paper suggests a method on the use of very long linear array microphone in order to obtain clear loud sound reinforcement system without howling. According to the results of the theoretical investigation, we have made that a linear array microphone. This is made of one hundred small condenser microphone having 2 cm of spatical period. To estimate the effect of sound reinforcement system physically and subjectively, four cases have been experimented : In case of using no sound reinforcement, nondirectivity microphone, rectangular window and Hnning window in linear array microphone. The experimental results prove that the case of Hnning window in linear array microphone is more excellent.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2269-2275
• /
• 2011

This paper deals with the design of a microphone array to measure location and spectral characteristics of railway noise sources. A microphone array estimates the direction of a noise source assumed as a point source using the delayed-sum beamforming method and its performance is determined in terms of resolution and side-lobe level. A 48 channel microphone array was already developed to measure noise sources of KTX trains and a new array with 96 microphones has been designed to enhance the performance. This paper simulates the performance the microphone arrays according to the configuration of microphones and verifies it through on-site tests.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.717-722
• /
• 2011

In this paper, noise source localization of the Korean high speed train was conducted by using delay and sum beam-forming method of a microphone array. At first, the microphone array having irregular configuration was designed and the resolution of which was analyzed from parameters such as 3-dB bandwidth and maximum side-lobe level. After the demonstration, the microphone array was applied on the high speed train and noise localization of the high speed train driving at 300 km/h was performed successfully.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.99-104
• /
• 2015

In this study, it has been initiated to investigate the specific abnormal vibration signal that has been captured in the power equipment. Array Microphone can be used in order to detect the direction and the position of the noise source. It is possible to track the abnormal mechanical noise in the power plant by utilizing the program and the microphone array system developed from this research. Array microphone system can be operated as a constant monitoring system.

• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.25-32
• /
• 2010

The paper proposes a hierarchical fault detection method for the high voltage equipment using a microphone array which detects the location of fault and the thermal imaging and CCD cameras which verifies the fault and stores the image, respectively. There are partial arc discharges on the faulty insulators, which generates a specific pattern of sound. Detecting the signal using the microphone array, the location of the faulty insulator can be estimated. The 6th band-pass filter was applied to remove noise signal from wind or external influence. When the mobile robot carries the thermal and CCD cameras to the possible place of the fault insulator, the fault insulators or power transmission wires can be detected by the thermal images, which are caused by the aging or natural erosion. Finally, the CCD camera captures the image of the fault insulator for the record. The detection scheme of fault location using the microphone array and the thermal images have been proved to be effective through the real experiments. As a result of this research, it becomes possible to use a mobile robot with the integrated sensors to detect the fault insulators instead of a human being.

• 한국소음진동공학회논문집
• /
• 제25권3호
• /
• pp.150-159
• /
• 2015

An experimental study on frequency characteristics of the microphone array covered with Kevlar sheet was conducted in the closed test section. Microphones that were flush-mounted in the wall of wind tunnel were subjected to very high flow noise resulting from the turbulence in the wall boundary layer. This noise interference by the boundary layer was referred as 'a microphone self-noise' and various approaches were studied to reduce this interference. Recessed microphone array with high tensioned cover was one of the good approaches to reduce this self-noise. But, the array cover could cause an unexpected interference to the measuring results. In this paper the frequency characteristics of the microphone array with Kevlar cover was experimentally studied. The white noise was used as a reference noise source. Three kinds of tensions for the Kevlar cover were tested and those results were compared with the test results without the Kevlar cover. The gap effect between the cover and microphone head was also tested to find out the proper position of microphone in the array module. Test results show that the mid-tension and 10mm gap was the best choice in the tested cases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.735-741
• /
• 2003

A simplified view of array design and application process was introduced. Array design is critical to achieve a successful phased array measurements. A planar microphone array is designed to produce optimum performance and also to fit economic requirement in integrating data acquisition system. Certain performance characteristics are of primary concern when designing arrays. These characteristics include array resolution, spatial aliasing and array sidelobe suppression. Every array has its directional pattern that shows such characteristics. Assuming that a monopole source is located in center, beam-patterns have been simulated varying measurement conditions such as number of sensors. array aperture size, distance between array and source, frequency of interest and so on. Sensor correction was conducted on very channel using magnitudes and phased of FRF with respect to a reference microphone channel. Then with a spiral type array, measurements have been made with two point sources of same frequency in order to investigate array resolving abilities. It is observed that higher frequency source achieves better resolution than lower one does.

• The Journal of the Acoustical Society of Korea
• /
• 제17권4E호
• /
• pp.22-27
• /
• 1998

A modified perturbation method is proposed to optimize the beam pattern of thinned microphone arrays. Both microphone spacing and array weight are iteratively adjusted via successive perturbation to achieve an optimum beam pattern in a Dolph Chebyshev sense. To improve the sidelobe performance, an alternative perturbation with respect to microphone spacing and array weight is implemented. Also, a linear space-tapering is employed in the perturbation process. It is demonstrated that the proposed approaches successfully yield sidelobe performances comparable to that of a normal array. Computer simulation results are presented.