• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.105-110
• /
• 2000

The Micromechanics test is new test method which uses comparatively smaller specimen than that required in conventional material tests. There are several methods, such as small-specimen creep test, the continuous indentation test, and small punch(SP) test. Among them, the small punch(SP) test method has been applied to many evaluation fields, such as a ductile-brittle transition temperature, stress corrosion cracking, hydrogen embrittlement, and fracture properties of advanced materials like FGM or MMC. In this study, the small punch(SP) test is performed to evaluate the mechanical properties at high/low temperature from $-196^{\circ}C$ to $650^{\circ}C$ and the material degradation for virgin and aged materials of 9Cr1MoVNb steel which has been recently developed. The ${\Delta}P/{\Delta}{\delta}$ parameter defined a slope in plastic membrane stretching region of SP load-displacement curve decreases according to the increase of specimen temperature, and that of aged materials is higher than the virgin material in all test temperatures. And the material degradation degrees of aged materials with $630^{\circ}C$ -500hrs and $630^{\circ}C$ -1000hrs are $36^{\circ}C$ and $38^{\circ}C$ respectively. These behaviors are good consistent with the results of hardness($H_v$) and maximum displacement(${\delta}_{max}$).

• 한국농공학회논문집
• /
• 제47권5호
• /
• pp.27-39
• /
• 2005

In the recent design of high ductile fiber-reinforced ECC (engineered cementitious composite), optimizing both processing and mechanical properties for specific applications is critical. This study presents an innovative method to develop new class ECCs, which possess the different fluid properties to facilitate diverse types of processing (i.e., self-consolidating or shotcrete processing) while maintaining ductile hardened properties. In the material design concept, we employ a parallel control of fresh and hardened properties by using micromechanics and cement rheology. Control of colloidal interaction between the particles is regarded as a key factor to allow the performance of the specific processing. To determine how to control the particle interactions and the viscosity of cement suspension, we first introduce two chemical admixtures including a highly charged polyelectrolyte and a non-ionic polymer. Optimized mixing steps and dosages we, then, obtained within the solid concentration predetermined based on micromechanical principle. Test results indicate that the rheological properties altered by this approach were revealed to be highly effective in obtaining the desired function of the fresh ECC, allowing us to readily achieve hardened properties, represented by pseudo strain-hardening behavior in uniaxial tension.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.917-920
• /
• 2008

ECC는 섬유가 매트릭스의 균열 면에서 가교작용을 통하여 균열의 폭을 제어함으로써 미세한 다중 균열(multiple cracking)을 발생시키면서 인장변형률 경화 거동을 보이는 섬유복합재료이다. 따라서 다중 균열과 인장변형률 경화 거동을 보일 수 있도록 마이크로역학에 기반하여 재료를 설계한다. 이 연구에서는 ECC의 다중 균열과 변형률 경화 거동을 모사할 수 있는 해석 방법을 제시하고자 한다. 이 과정에서 균열 면에서 이론적으로 유도된 가교응력-개구변위 관계에서 섬유의 방향과 유효 섬유의 개수를 고려하여 수정된 응력-변위 관계를 사용하였으며, 매트릭스 및 섬유-매트릭스 계면의 불확실성을 고려하기 위하여 각 요소의 매트릭스 균열 강도(${\sigma}_{fci}$) 및 탄성계수($E_{ci}$), 균열면 최대응력(${\sigma}_{Bi}$) 및 변위(${\delta}_{Bi}$), 계면의 화학적 부착에 의한 균열면의 초기응력(${\sigma}_{0i}$), 균열 간격(${\alpha}_cX_d$)이 일정 범위 내에서 무작위로 선택되도록 하였다. 해석결과 변형률 경화거동 및 최대 변형률을 충분히 모사할 수 있는 것으로 나타났으며, 균열 개수 및 균열면의 강성이 해석의 중요한 변수임을 확인할 수 있었다.

• Advances in nano research
• /
• 제15권5호
• /
• pp.467-484
• /
• 2023

Despite the significant features of fiber-reinforced cementitious composites (FRCCs), including better mechanical, fractural, and durability performance, their high content of cement has restricted their use in the construction industry. Although ground granulated blast furnace slag (GGBFS) is considered the main supplementary cementitious material, its slow pozzolanic reaction stands against its application. The addition of nano-sized mineral modifiers, including nano-silica (NS), is an alternative to address the drawbacks of using GGBFS. The main object of this empirical and numerical research is to examine the effect of NS on the strain-hardening behavior of cementitious composites; ten mixes were designed, and five levels of NS were considered. This study proposes a new method, using a four-point bending test to assess the use of nano-silica (NS) on the flexural behavior, first cracking strength, fracture energy, and micromechanical parameters including interfacial friction bond strength and maximum bridging stress. Digital image correlation (DIC) was used for monitoring the initiation and propagation of the cracks. In addition, to attain a deep comprehension of fiber/matrix interaction, scanning electron microscope (SEM) analysis was used. It was discovered that using nano-silica (NS) in cementitious materials results in an enhancement in the matrix toughness, which prevents multiple cracking and, therefore, strain-hardening. In addition, adding NS enhanced the interfacial transition zone between matrix and fiber, leading to a higher interfacial friction bond strength, which helps multiple cracking in the composite due to the hydrophobic nature of polypropylene (PP) fibers. The findings of this research provide insight into finding the optimum percent of NS in which both ductility and high tensile strength of the composites would be satisfied. As a concluding remark, a new criterion is proposed, showing that the optimum value of nano-silica is 2%. The findings and proposed method of this study can facilitate the design and utilization of green cementitious composites in structures.

• 비파괴검사학회지
• /
• 제22권3호
• /
• pp.267-274
• /
• 2002

본 연구는 Cr-Mo-V강의 다양한 분극특성들을 이용하여 비파괴적으로 재질열화를 평가하는 전기화학적 기법에 대해서 서술한 것이다. 사용된 전기화학적 기법은 스테인레스강의 열 이력에 의해 주로 야기되는 강화원소 결핍 영역에서의 예민화 그리고 부식속도를 평가하기 위해 널리 사용되는 양극분극 시험법이다. 재질열화 평가는 $10{\times}10{\times}0.5mm$ 크기의 시험편을 사용하는 미소역학 시험법으로 잘 알려진 SP시험에 의해 수행되었다. $630^{\circ}C$에서 1,000hrs 시효된 재료가 가장 높은 재질 열화도 ${\Delta}[DBTT]_{SP}$을 보였으나, 2,000hrs 그리고, 3,000hrs 시효된 재료는 시효 시간이 증가함에 따라 ${\Delta}[DBTT]_{SP}$의 감소를 보였다. 전류밀도의 차 $({\Delta}I_{FP},\;{\Delta}I_{SP})$가 1,000hrs 시효시간까지는 증가하였고, 그 이후의 시효시간에서는 시효시간의 증가와 더불어 감소됨이 관찰되었다. 이 같은 결과는 시효재료에 대한 경도의 거동과 일치하였다. 덧붙여, ${\Delta}[DBTT]_{sp}$는 ${\Delta}I_{FP}$ 및 ${\Delta}I_{SP}$와 같은 전기화학적 분극특성들과 좋은 상관관계를 가지고 있음을 알 수 있었다.