• 제목/요약/키워드: Microcontroller

검색결과 532건 처리시간 0.034초

마이크로컨트롤러 TCP/IP 스텝 모터 위치제어기 구현 (Implementation of the TCP/IP Step Motor Motion Controller)

  • 윤태성;김선길;이치환
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2005년도 전력전자학술대회 논문집
    • /
    • pp.370-372
    • /
    • 2005
  • In this paper, the microcontroller TCP/IP NIE(Network Interface Equipment) which is exclusive of an operating system is implemented and the applied example to a step motor motion controller is then explained. The microcontroller TCP/IP NIE supplies a DHCP(Dynamic Host Configuration Protocol) as well as basic TCP/IP network protocols. So, the automatic setting up of the Dynamic If(Internet Protocol) is possible. To implement a control of a system with an internet, the microcontroller TCP/IP NIE is applied to a step motor motion controller and a step motor is then controlled with a Microsoft Windows-based Telnet application program.

  • PDF

다기능 산소전극에 의한 산소투과특성 동시측정 (Simultaneous measurement of oxygen permeability by using of multi-functional oxygen electrode)

  • 이동희;정진휘;유형풍;김태진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.532-535
    • /
    • 2000
  • We have fabricated a sensor system for on-line monitoring the oxygen permeability and diffusivity of six different polymer films using the miniaturized 6 cathode(Ag)-single anode(Ag/AgCl) type hexagonal oxygen electrode. This system consists of multiple input front-end electronics, signal conditioning circuit using the embedded microcontroller 80C196KC, PC interface circuit and PC with the OS for microcontroller and the operating program for this system. The digital low-[ass filter was programmed and the simulated filter characteristics were enough to eliminate the noise from sensor signal. According to the experimental results, the linearity coefficients of the output voltage to oxygen partial pressure for each sensor electrode of six cathode type oxygen sensor are 0.998, 0.997, 0.998, 0.997, 0.997, 0.997 respectively, and the response times are all within 4 minutes.

  • PDF

Help of Microcontroller on Voltage Control to Reduce Transformer Inrush Current

  • Fard, Ali Asghar Fathollahi
    • Transactions on Electrical and Electronic Materials
    • /
    • 제15권1호
    • /
    • pp.12-15
    • /
    • 2014
  • At the moment of transformer energization by the supply voltage, a high current called transient inrush current, which may rise to ten times the transformer full load current, could be drawn by the primary winding. This paper discusses a microcontroller circuit with the intention of controlling and limiting the inrush current for a transformer, by the method of ramping up the supply voltage feeding to the transformer primary. Simulations and the experimental results show a significant reduction of inrush current, when the ramping up voltage is applied to the three-phase transformer load. The inrush current could be almost eliminated if the correct switching step rate is chosen.

INTERNET 사용을 위한 SMART POWER DEVELOPEMENT SYSTEM (SMART POWER DEVELOPEMEN SYSTEM FOR USE IN INTERNET)

  • 김기봉
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.341-344
    • /
    • 2000
  • 본 논문에서는 stepper motor 나 BLDC motor를 구동하기 위하여, 최신 microcontroller, PC, control IC board 등으로 구성된 새로운 시스템을 설명하는데 목적이 있다. 이 시스템에서는 인터넷으로 전송되는 microcontroller program를 이용하여 SPDS(smart power development system)을 구동시키고, 이로 인하여 dedicated drive IC를 제어하여 stepper 또는 BLDC motor를 구동시키게 되며, 원격지에 있는 사용자의 motor를 제어함을 목표로 하고 있다. 본 논문에서 사용된 drive IC 는 SGS-Thomson 제품으로써 stepper motor 용으로 L6205/6/7/8, 그리고 BLDC motor 용으로 L6235 이다. SPDS는 ST92F120 16-bit microcontroller를 사용하고 있다. 이 논문에서는 인터넷 Protocol Converter에 의한 프로그램 전송, Operating System Program 및 Driver Software Program의 생성 및 구성, Drive IC의 구성 및 특징, SPDS 의 hardware 및 software 의 구성 등에 대하여 설명한다.

  • PDF

Microcontroller-Based Liquid Level Control Modeling

  • Dumawipata, Teerasilapa;Unhavanich, Sumalee;Tangsrirat, Worapong
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.82.3-82
    • /
    • 2001
  • This work presents a design technique for the implementation of the liquid level control system by based on the use of a single-chip microcontroller. The proposed model system offers the following attractive features : (1) application of the pressure transducer for sensing the height of liquid in tank (2) using the obtained liquid level for defining on-off condition of the water pump (3) the liquid values were controlled by using stepping motors for controlling of 57 points (4) can set up by using manual control or automatic control (5) can monitor and display the process status either on microcontroller-based control board or on the computer via RS232 serial-port. Experimental results have been employed to show the effectiveness ...

  • PDF

다중 마이크로콘트롤러를 사용한 배터리 관리 시스템의 개발 (Development of Battery Management System using Multiple Microcontroller)

  • 최정원;장운근
    • 한국산업융합학회 논문집
    • /
    • 제21권6호
    • /
    • pp.329-335
    • /
    • 2018
  • In an electric vehicle and Energy Storage System(ESS), a large number of batteries are connected in series or parallel to obtain high voltage and current. The battery management system(BMS) is needed because battery has a characteristic that explode in overcharging and overcurrent situations due to the nature of the battery material and the battery life is dramatically reduced when the battery is overdischarged below the specified voltage. In this paper, we proposed a system that can manage a large amount of batteries through the communication of master-slave type with multiple microcontroller. We confirmed the stable operation of the proposed system through the balancing-charging and storage mode experiments.

정전용량 형 압력맵핑센서를 위한 록인 증폭기 어레이 개발 (Development of a Lock-In Amplifier Array for Capacitive Type Pressure Mapping Sensor)

  • 김청월;이영태
    • 반도체디스플레이기술학회지
    • /
    • 제16권4호
    • /
    • pp.63-67
    • /
    • 2017
  • In this study, We developed a simple and low cost capacitive pressure mapping sensor and microcontroller-base lock-in amplifier array. We developed capacitive type pressure mapping sensor by forming the electrode and adhesives on plastic films using only the printing process, and the finishing the process by bonding the two films. Lock-in amplifier array was based on a general purpose microcontroller and had only a charge amplifier as analog circuits. In this study, a $10{\times}10$ capacitive type pressure mapping sensor and lock-in amplifier array was fabricated and its characteristics were analyzed.

  • PDF

저비용 개방형 Microcontroller를 사용한 온실 환경 측정 시스템 개발 (Development of a Greenhouse Environment Monitoring System using Low-cost Microcontroller and Open-source Software)

  • 차미경;전윤아;손정익;정선옥;조영열
    • 원예과학기술지
    • /
    • 제34권6호
    • /
    • pp.860-870
    • /
    • 2016
  • 환경요인에 대한 계속적인 모니터링은 농민들에게 온실에서 생육한 작물의 품질과 생산성을 개선할 수 있는 유용한 정보를 제공해 줄 것이다. 이 연구의 목적은 개방형의 저비용 microcontroller를 사용하여 온실 환경 계측 시스템을 개발하기 위함이다. 측정하기 위한 온실 환경 요인들은 대기 온도, 상대습도와 이산화탄소 등이다. 온도, 상대습도와 이산화탄소 농도 측정범위는 $40{\sim}120^{\circ}C$, 0~100%와 0-10,000 ppm이다. 온실 환경 자료를 실시간으로 모니터링하기 위해 $128{\times}64$ 그래픽 LCD을 사용하였다. 컴퓨터와 통신하기 위해 USB 인터페이스를 구성한 아두이노 Uno R3는 6개의 아날로그 입력과 14개의 디지털 입출력 핀으로 구성되어 있다. 온도/습도 센서는 디지털 핀 2번과 3번에 연결하였다. 이산화탄소 센서는 디지털 핀 12번과 13번에 연결하였다. LCD는 디지털 1번(TX)에 연결하였다. 스케치는 아두이노 프로그램 (IDE)로 프로그래밍하였다. 아두이노보드, 센서 및 액세서리 등을 포함한 측정 시스템은 저비용(총 244$)으로 개발되었다. 벤로형 온실에서 환경 요인들은 문제 없이 잘 측정되었다. 우리는 개방형 소프트웨어를 사용한 저비용 microcontroller가 우리 나라의 대부분의 면적을 차지하는 비닐 온실의 대기 환경을 측정하기 위해서 유용하게 사용되리라 예상할 수 있었다.

PCS와 원칩 마이크로콘트롤러를 이용한 원격 검침 시스템 (Remote Measurement System with PCS and One Chip Microcontroller)

  • 이지홍;하인수;김인식
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
    • /
    • pp.171-174
    • /
    • 2000
  • In stead of RF module which has been used conventionally in many remote measurement applications, a new type of remote measurement system based on PCS(Personal communication system) and one chip Microcontroller is proposed in this work. PCS has many advantages with respect to cost reliability, communication quality, and so on. The proposed system consists of three different modules: PCS module, micro-controller module, and sensor module. System configuration as well as illustrative experiments will be described in detail.

  • PDF