• Journal of Marine Life Science
• /
• v.1 no.1
• /
• pp.70-78
• /
• 2016

Microalgae are of significant importance for future biotechnological applications. Many microalgae banks or laboratories attempt to maintain various microalgae for further research purposes. Cryopreservation has been preferred to reduce a labor-intensive and costly routine sub-culturing. Cryopreservation can also diminish the genetic drift risk. However, cryopreservation as a long term storage of microalgae method are still in developing progress because it cannot be generalized for all microalgae. Microalgae types, cryoprotectant agents (CPAs) types, freezing and thawing methods are the most important factors that should be considered for cryopreservation. In this short review the basic principles and the current advanced of microalgae cryopreservation methods are discussed with a suggested starting parameters for microalgae cryopreservation.

• KSBB Journal
• /
• v.26 no.2
• /
• pp.143-150
• /
• 2011

The aim of the study was to optimize harvesting method for concentrating microalgae from microalgae mass culture. It is well known that the mass density of microalgae is usually very low and these are small size (5-20 ${\mu}m$) in the culture medium. It is essential that microalgae is harvested and concentrated economically for economical biodiesel production from microalgae. In this study, to determine optimized conditions for microalgae harvesting by chemical flocculation. Flocculation of three algae, Chlorella ellipsoidea, Dunaliella bardawil, and Dunaliella tertiolecta, was performed using various chemical flocculants, such as inorganic flocculants (aluminium sulfate, aluminium potassium sulfate, ferrous sulfate, ferric sulfate, ferric chloride, calcium hydroxide, sodium carbonate, sodium nitrite, and sodium aluminate), organic flocculant (polyacrylamide), and biopolymer flocculants (chitosan and starch). The results indicated that aluminium based inorganic flocculants is suitable for microalgae harvesting such as Chlorella ellipsoidea, Dunaliella bardawil, and Dunaliella tertiolecta. The results also recommended that flocculant doses, agitation speed, agitation time, sedimentation time for economical microalgae harvesting method using chemical flocculants.

• Ocean and Polar Research
• /
• v.45 no.1
• /
• pp.1-9
• /
• 2023

Marine microalgae have different collection methods depending on their habitat. In the case of adhesive microalgae, it is difficult to separate organisms from the substrate surface, and contamination is likely to occur during the sampling process. In this study, we analyzed the collection efficiency of adhesive microalgae using three artificial fiber materials (nylon, blend fabric, and viscose rayon). Each fiber showed different fiber diameter and pore characteristics (nylon 26.09 ㎛, blend fabric 56.6 ㎛, viscose rayon 101.3 ㎛). In addition, attached organisms were collected on the surface of artificial substrates at Bukseong Port in Incheon using each tested fiber material. After that, we investigated the population and species composition. The highest number of cells was found in nylon, which was 8 times higher than in the least collected viscose rayon material. In addition, we identified 24 microalgal species from the substrate, demonstrating that the species composition differed from that of surface water. The number of collected microalgae species varied depending on the fiber materials, with nylon containing all the adhesive microalgae. In contrast, only a few microalgae were observed in other fibers. These results suggest that, of the tested fibers, nylon material may be suitable for collecting adhesive microalgae. As a result, this study may be useful for future research on adhesive microalgae.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.356-362
• /
• 2017

This study investigates the use of methyl-esterified eggshell membranes (MESM) for the harvesting of microalgae species under various conditions. Eggshell membranes were esterified with HCl to impact polycationic characteristics. After methyl esterification, the negative surface charge property of eggshell membrane was changed from negative to positive for all pH values to improve microalgae sorption capacity. The harvesting efficiency of microalgae by MESM reached 78-99% for all pH ranges evaluated. In addition, a 150 mesh particle size and $10mg\;L^{-1}$ MESM dose were found to yield up to 98% microalgae harvesting. These results indicate that the high cationic charge of MESM strongly adsorbs the negatively-charged microalgae. MESM is biocompatible and can be applied to the harvest of microalgae.

• Applied Chemistry for Engineering
• /
• v.33 no.3
• /
• pp.242-257
• /
• 2022

Microalgae is becoming a vital component for a circular economy and ultimately for sustainable development. Herein, recent developments in different outcomes of microalgae for wastewater treatment and biorefinery were reviewed. From its primary function as a third-generation resource of biofuel, the usage of microalgae has been diversified as an integral element for the CO₂ sequestration and production of economically valuable products (e.g., pharmaceuticals, animal feeds, biofertilizer, biochar, etc.). Principles and recent challenges for each microalgae application were presented to suggest a motivation for future research and the direction of development. The integration of microalgae within the concept of the circular economy was also discussed with various routes of microalgae-based biorefinery.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.715-724
• /
• 2003

Distributional patterns of microalgae were studied in the tidal flats of Gamami Beach(Young-Gwang, Korea) from November 1999 to 2000 July. The tidal flats of Gamami Beach was composed mainly of sandy sediment. The concentrations of nutrients were low compared with other tidal flats. In the present study, 68 species of microalgal flora were identified. These were comprised of 25 species of benthic microalgae and 59 species of planktonic microalgae. Diatoms predominated the benthic microalgae with 96.0% of total species occurred. Dominant species were Amphora sp., Cocconeis sp., Coscinodiscus asteromphalus, Coscinodiscus sp., Nitzschia sigma var. intermedia, Nitzschia distans, Navicula spp., Paralia sulcata, Pleurosigma sp. Skeletonema coastatum, and Surirella sp. Among them, Amphora sp., Paralia sulcata, and species of Pleurosigma and Nitzschia were observed throughout the studied period. Planktonic microalgae of Gamami Beach was also predominated by diatoms. They occupied 88.1% of total planktonic microalgae. The density of microalgal population was higher in silty sediment than in sandy sediment. The population density of microalgae was higher in high tide zone than that in low tide zone. The density of the benthic microalgae in the surface layer of tidal flats showed increasing tendency for 2 hours after the beginning of ebb tide. On the contrary, benthic microalgal density of subsurface layer was decreased during the period. Concentrations of chlorophyll ${\alpha}$ from sediment and water were not synchronized during the study period. Therefore, the distributional patterns of the benthic microalgae and planktonic algae seemed not to be related. Chlorophyll ${\alpha}$ of water was highly related with the concentration of NH$_4$-N, whereas, chlorophyll ${\alpha}$ of sediment uas related with NO$_3$-N concentration.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.2
• /
• pp.165-174
• /
• 2003

Xanthophylls are oxygenated carotenoids that serve a variety of functions in photosynthetic organisms and are essential for survival of the organism. Within the last decade, major nor advances have been made in the elucidation of the molecular genetics and biochemistry of the xanthophyll biosynthesis pathway. Microalgae, yeast, or other microorganisms produce some of the xanthophylls that are being commercially used due to their own color and antioxidant properties. Currently, only a few microalgae are being considered or already being exploitd for the production of high-value xanthophylls. However, new developments in molecular biology have important implications for the commercialization of microalgae, and make the genetic manipulation of the xanthophyll content of microalgae mure attractive for biotechnological purposes. Accordingly, the current review summarizes the general properties of xanthophylls in microalgae and the recent developments in the biotechnological production of xanthophylls.

• Ocean and Polar Research
• /
• v.44 no.2
• /
• pp.161-177
• /
• 2022

Microalgae can attach to the surface of ships and then spread to various areas by means of ship transport. The introduction of invasive species through ships is recognized as a marine problem worldwide. Identification of attached microalgae is necessary to investigate such movement between countries through ships. In the present study, through analytical methods we reviewed research data to identify the taxa of domestic attached microalgae and assess the ecological impacts of such microalgae. A total of 87 genera and 153 species (143 species of diatoms, 10 species of cyanobacteria, and 4 genera of dinoflagellates) were identified as native attached microalgae in Korea, and diatoms accounted for 93% of the total. Most of these attached microalgae were identified through research on natural substrates such as seaweeds and bedrock, and some were also identified through experiments using artificial adherent plates. To date, there is no information on microalgae attached to international ships and introduced into Korea. Molecular genetic analysis and systematic management through on-site sampling of international ships, microscopic analysis, and meta-barcoding are necessary to assess the inflow and spread path of hull-attached marine alien species and evaluate the risk they pose to the domestic ecosystem.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.4
• /
• pp.407-413
• /
• 2015

Research for renewable energy is being performed since it has the merits of little pollution of the environment and sustainable energy resources. Microalgae is attractive as a renewable energy resource. Biomass of the microalgae can be produced by mass culturing, and bulk harvest technology of is needed to produce biomass continuously. Recently, ultrasonic waves were used to harvest the cultivated microalgae continuously. In this study, the separation process using ultrasonic waves was performed to effectively harvest the microalgae. An ultrasonic wave separation resonator was designed and manufactured based on the acoustic field analysis. Separation experiments using design of experiment were carried out, and the influence of experimental variables from the ultrasonic wave separation process was investigated. Mixing conditions of variables were estimated to obtain high separation efficiency and a large microalgae harvest. Experimental results for suitable mixing conditions were compared with simulation results calculated from the state equation.

• ALGAE
• /
• v.22 no.3
• /
• pp.229-234
• /
• 2007

This study was to determine the extent of bacteria contamination and resistance to various antibiotics used commonly in microalgal culture. Seven different dose levels of chloramphenicol, dihydrostreptomycin sulphate, neomycin, penicillin G, streptomycin sulphate, penicillin G + streptomycin sulphate, and penicillin G + streptomycin sulphate + chloramphenicol were added to each culture of microalgae. The lethal effects on microalgae and bacteria were the highest in chloramphenicol and the lowest in penicillin G. The axenic culture of bacillariophyceae and dinophyceae was more difficult than that of chlorophyceae and haptophyceae because of their complicate external morphology. The efficient antibiotics and their concentrations for axenic cultures varied with microalgal species. The optimum quantity for antibiotic treatments were 2,000 ppm of dihydrostreptomycin for Chlorella ellipsoidea, neomycin 500 ppm of Isochrysis galbana and Heterosigma ahashiwo, hloramphenicol 500 ppm of Cyclotella didymus, and dihydrostreptomycin sulphate and neomycin 6,000 ppm of Thalassiosira allenii.