• Composites Research
• /
• v.14 no.5
• /
• pp.46-53
• /
• 2001

In this research, damage behavior of singly oriented ply (SOP) fiber metal laminate (FML) subjected to concentrated load was studied. The static indentation tests were conducted to study fiber orientation effect on damage behavior of FML. During the static indentation tests, acoustic emission technique (AE) was adopted to study damage characteristics of FML. AE signals were obtained by using AE sensor with 150kHz resonance frequency and the signals were compared with indentation curves of FML. The damage process of SOP FML was divided by three parts, i.e., crack initiation, crack propagation, and penetration. The AE characteristics during crack initiation show that the micro crack is initiated at lower ply of the plate, then propagate along the thickness of the plate with creating tiber debonding. The crack grow along the fiber direction with occurring 60∼80dB AE signal. During the penetration, the fiber breakage was observed. As fiber orientation increases, talc fiber breakage occurs more frequently. The AE signal behaviors support these results. Cumulative AE counts could well predict crack initiation and crack propagation and AE amplitude were useful for the prediction of damage failure mode.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.33-37
• /
• 2011

In the fields of display, optics, and energy, it is important to improve micropattern-machining technology for achieving small patterns, large surface areas, and low cost. Unlike flat molds, roll molds have the following advantages: they can be manufactured within a short time, larger surface areas can be obtained, and continuous molding can be achieved. In this study, we aim to investigate the causes for errors in the shapes for a micropattern-machining process, and we show that by compensating the dynamic balance of roll molds, the dimensional accuracy of machined parts can be improved. The experimental results show that dynamic-balance compensation for a roll mold reduced the mass unbalance and the vibrations of the roll mold, and as a result, the dimensional accuracy of machined micropatterns has been improved.

• Tribology and Lubricants
• /
• v.28 no.3
• /
• pp.136-141
• /
• 2012

In this paper, we investigated the friction characteristics of $W100^{\circ}{\o}L25m$ ellipse type surface pattern, on bearing steel. These characteristics are researched by utilizing a pin-on-disk wear test machine, under various velocities and other conditions. The reduction of friction is a necessary requirement for the improved efficiency of industrial parts. As the speed increases, there is a decrease in the effect of the dimple of friction characteristic in low velocity, with substantially little change to density. Conversely, as the load increases, the test direction of ellipse type dimple pattern, resulting in a difference in the texture of these two components. At a dimple density of 7.5% the friction characteristic is easily demonstrated, with a consistent change in both speed and load.

• Cartoon and Animation Studies
• /
• s.12
• /
• pp.56-72
• /
• 2007

The purpose of this study is to analyze the characteristics of animation cluster in Chuncheon. It has been over 10 years since Chuncheon was designated as the cluster raising the animation industry. The Chuncheon cluster is trying to differentiate through managing several unique strategies. In order to realize the micro-regionalism, it focuses on co-production not with domestic companies but with foreign companies. Especially, for establishing the whole concrete production pipe-line, it concerns to make co-production contracts dealing with not only for the main production part but also pre- and post-production parts. Based on these production experience, it is building the production complex in the name of ICT convergence cluster. The changed role of the policy-management organization(Gangwon Information & Multimedia Corporation, GIMC) enables these differentiated strategies by itself. The establishment of the Asian Animation Round(AAR) is recognized as the characteristic of macro-regionalism. Starting from the year of 2006, the AAR tries to place Chuncheon as the hub of animation production in Asia and focuses on constructing the network of animation production countries that have developed their production capabilities through sub-contracts. This type of production and market bloc has not been made before.

• Journal of Welding and Joining
• /
• v.27 no.3
• /
• pp.73-79
• /
• 2009

This present paper investigated the mechanical properties and the microstructures of each penetration shapes classifying the conduction shape area and the keyhole shape area about electron beam welded 120(T)mm thick plated aluminum 5052 112H. As a result the penetration depth is increased linearly according to the output power, but the aspect ratio is decreased after the regular output power. In the conduction shape area, the Heat affected zone is observed relatively wider than the keyhole shape area. In the material front surface of the welded specimen, the width is decreased but the width in the material rear surface is increased. After the measuring the Micro Vikers Hardness, it showed almost similar hardness range in all parts, and after testing the tensile strength, the ultimate tensile strength is similar to the ultimate tensile strength of the base material in all the specimens, also the fracture point was generated in the base materials of all the samples. In the result of the impact test, impact absorbed energy of the Keyhole shape area is turned up very high, and also shown up the effect about four times of fracture toughness comparing the base material. In the last result of observing the fractographs, typical ductile fraction is shown in each weld metal, and in the basic material, the dimple fraction is shown. The weld metals are shown that there are no other developments of any new chemical compound during the fastness melting and solidification.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.1007-1018
• /
• 2019

In the present study, according to morphological observations followed by recent circumscriptions, we have classified the Korean taxa of the family Linderniaceae into Scrophulariaceae sensu lato has been considered in several works, though the taxa have remained undefined because identification work was mostly done according to vegetative morphological features, such as the leaf shape, leaf margins, and leaf venation. The taxa of Linderniaceae are mostly considered to be weeds and, for correct identification, it is necessary to clarify their taxonomic characteristics. Morphological studies were carried out using samples collected in the field. Micro-morphological observations of the vegetative and floral parts were also performed using light microscopy (LM) and scanning electron microscopy (SEM). We concluded that important characteristics are reproductive morphologies viz. calyx, stamen structure, capsule shape, calyx ratio with capsule, inflorescence morphology, and seed morphology. As a result, we formulated taxa descriptions and provided a key of the genera of Linderniaceae in Korea. Lindernia crustacea (L.) F. Muell. is transferred to Torenia crustacea (L.) Cham. & Schltdl. Lindernia micrantha D. Don and L. angustifolia (Benth.) Wettstein are a synonym of Vandellia micrantha (D. Don) Eb. Fisch., Schäferh. & Kai Müll. Lindernia attenuata Muhl. and L. dubia var. major (Pursh) Pennell are a synonym of Lindernia dubia (L.). Lindernia verbenifolia (Colsm.) Pennell is a synonym of Bonnaya antipoda Druce. Our study reports the presence of four genera: Bonnaya, Lindernia, Torenia, and Vandellia, comprising six taxa under the family Linderniaceae in Korea.

• Journal of the Korean Home Economics Association
• /
• v.44 no.5 s.219
• /
• pp.89-98
• /
• 2006

The purpose of this study is to seek for a direction of child-care development through the basic concepts of home economics which have taken charge of much parts of the studies in child-care in the early years. When the problem of child-care is studied in view of the developmental process or the basic concepts of home economics, it is summed up as follows; First, on the basis of human ecological approach, when we study child-care, it needs to emphasize the mutual relationship between the macro-environment in connection with home and child-care. The study of child-care have to find out the relationship between the micro-environment in connection with children and the macro-environment in connection with home. And on the basis of this study, we must endeavor to build up the desirable environment of child-care. Second, on the basis of the concept of Institutional household, we mud be concerned about the developmental stages of young children, and emphasize 'the principle of love and care'. This means that the institution of child-care must be considered as a place which enlarges the merits of home and complements the defects of home through the strengthener of the function of home. Third, on the basis of healthy family, child-care service must support and complement the function of bringing of home in view of 'total healthiness of home'. Child-care service must be offered to be able to be chosen according to the total conditions of family such as the employment of mother, the family life cycle, the life style, the socioeconomic status of family.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.94-103
• /
• 2020

This study investigated the effects of ultrasonic nanocrystal surface modification (UNSM) on the deteriorated surface of AISI SUS316L additively manufactured (AM) using the powder bed fusion (PBF) technique. Specifically, the effects of UNSM conditions on surface topology, hardness, and anti-corrosion were examined. Before UNSM treatment, the stainless steel 316L powder was processed via the PBF machine to prepare a substrate. We observed surface changes due to UNSM treatments in PBF SUS316L substrates and examined the correlation between topology changes, roughness, hardness, and anti-corrosion. After UNSM treatment, the coarse as-built surface was refined, and a regular micro-profile was implemented. Compared to the non-treated PBF sample, the waviness and roughness of the surfaces after UNSM treatment decreased by up to 56.0% and 94.5%, respectively, and decreased further as the interval decreased. The hardness improved by up to 63.0% at a maximum depth of 500 ㎛ from top surface by the UNSM treatment. The results of the corrosion test showed that the corrosion resistance of the UNSM specimens was moderately improved compared to that of the untreated surface. This study confirmed that UNSM is an effective post-processing technique for additively manufactured parts.

• Composites Research
• /
• v.29 no.5
• /
• pp.315-320
• /
• 2016

Conventionally, composite aircraft structures are fabricated within autoclave at high pressure. However, autoclave process has several disadvantages including high curing costs and limitation of part size. Recently, out-of-autoclave (OoA) processes have been investigated in many studies to replace conventional autoclave process. A newly developed OoA prepreg, using conventional ovens, can significantly reduce the curing costs and produce autoclave-quality parts. Nevertheless, manufacture of void-free complex shape structure using OoA process presents significant challenges because of the low consolidation pressure. In this study, integrated skin-spar-rib composite part was fabricated using OoA prepreg. And cross-sectional macro- and micro-graphs of the part were examined in order to assess the possibility of replacing conventional autoclave process.

• Computers and Concrete
• /
• v.19 no.5
• /
• pp.443-449
• /
• 2017

Taking high geothermal tunnels as background, the deformation of concrete for shotcrete use was studied by simulating hot-humid and hot-dry environments in a laboratory. The research is made up by two parts, one is the influence of two kinds of high geothermal environments on the deformation of shotcrete, and the other is the shrinkage inhibited effect of fiber materials (steel fibers, polypropylene fibers, and the mixture of both) on the concrete in hot-dry environments. The research results show that: (1) in hot and humid environments, wet expansion and thermal expansion happened on concrete, but the deformation is smooth throughout the whole curing age. (2) In hot and dry environments, the concrete suffers from shrinkage. The deformation obeys linear relationship with the natural logarithm of curing age in the first 28 days, and it becomes stable after the $28^{th}$ day. (3) The shrinkage of concrete in a hot and dry environment can be inhibited by adding fiber materials especially steel fibers, and it also obeys linear relationship with the natural logarithm of curing age before it becomes stable. However, compared with no-fiber condition, it takes 14 days, half of 28 days, to make the shrinkage become stable, and the shrinkage ratio of concrete at 180-day age decreases by 63.2% as well. (4) According to submicroscopic and microscopic analysis, there is great bond strength at the interface between steel fiber and concrete. The fiber meshes are formed in concrete by disorderly distributed fibers, which not only can effectively restrain the shrinkage, but also prevent the micro and macro cracks from extending.