• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.1027-1028
• /
• 2010

• 대한치과보철학회:학술대회논문집
• /
• 2000.04a
• /
• pp.42-42
• /
• 2000

• The Journal of the Korean dental association
• /
• v.32 no.9 s.304
• /
• pp.620-628
• /
• 1994

Stud attachment는 overdenture와 overlay partial denture에 이용되며 임상술식 및 기공과정이 간편하며 가격이 저렴하여 많이 이용되고 있다. 여기에서는 Stud attachment(대한치과의사협회지 1993년 7-8월호)에 이어서 최근에 개발됐거나 우리가 임상에 응용하기에 적합하다고 생각되는 Micro-Fix, Dalbo-B, Dalbo-Rotex attachment에 관하여 설명하고자 한다.

• The Journal of the Korean dental association
• /
• v.32 no.8 s.303
• /
• pp.550-556
• /
• 1994

Stud attachment는 overdenture와 overlay partial denture에 이용되며 임상술식 및 기공과정이 간편하며 가격이 저렴하여 많이 이용되고 있다. 여기에서는 Stud attachment(대한치과의사협회지 1993년 7월호)에 이어서 최근에 개발됐거나 우리가 임상에 응용하기에 적합하다고 생각되는 Micro-Fix, Dalbo-B, Dalbo-Rotex attachment에 관하여 설명하고자 한다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.127-131
• /
• 2006

Existing orthopedic implants such as pedicle screw and spinal cage were designed to fix the spinal structure. But, nowadays, physicians want to rehabilitate there original functions. To achieve this request, we studied micro-movable structure for interspinous. As a first step, we designed interspinous structure by 3D CAD to join each spinous processes. Next, we simulate it with various factors such as the thickness of micro-movement structure and the design of clip. At last, we performed static compressive test to satisfy the failure load of 339N and dynamic endurance test of 1.2M cycle. As a result, we developed interspinous implant and did several surgery to evaluated its satisfaction.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.51-55
• /
• 2017

Micro fuel cells have high reliability and long usage time. Among them, PEMFC (polymer Electrolyte Membrane Fuel Cell) is suitable as a portable power source because it is easy to fix electrolyte and simple structure. The bipolar plate, a key component of the fuel cell, is produced by cutting. In the case of micro fuel cell separator, burr is very small and the flow channel size in the separator is very small. Therefore, it is difficult to remove burrs in the usual way such as a brushing or ultra-sonic method. Therefore, this study proposed electrolytic polishing process and analyzed the characteristics of each condition by introducing the concept of roughness reduction rate. In addition, the ultrasonic process was added to analyze the effect of ultrasonic addition.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2457-2460
• /
• 2003

There is a great demand to manipulate biological cell autonomously since biologist should spend much time to obtain skillful manipulation techniques. For this purpose, we propose a cell chip to control, carry, fix and locate the cell. In this paper, we focus on the cell rotator to rotate individual biological cell based on a micro fluidics technology. The cell rotator consists of injection hole and rotation well to rotate a biological cell properly. Under the variation of flow rate in injection hole, the angular velocity of a biological cell is evaluated to find the feasibility of the proposed rotation method. As a practical experiment, Zebrafish egg is employed. Based on this research, we find the possibility of non-contact rotation way that can highly reduce the damage of the biological cell during manipulation. To realize an autonomous biological cell manipulation, a cell chip with manipulation well and micro channel in this research will be utilized effectively in near future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.4
• /
• pp.409-411
• /
• 1998

The effects of iron and EDTA on the growth of Chlorella sp. KR-1, a highly$CO_2$tolerant fresh water micro alga, have been determined. The algal growth was significantly affected not only by iron concentrations in the medium but by the ratio of iron to EDTA. The linear growth rate and the final cell concentration are increased with the supplementation of EDTA. Enhanced growth of Chlorella sp. KR-1 by the supplementation of EDTA was mainly due to the fact that the supply of iron to the algal culture had been possible for a longer time. When Chlorella sp. KR-1 is cultured in the medium of iron-15H-EDTA, the linear growth rate and the final cell concentration are at their maximum, 0.88 g/l${\cdot}$day and 9.1 g/l, respectively. The results show that Chlorella sp. KR-1 may be used for mass cultivation to fix$CO_2$from stack gases.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1139-1145
• /
• 2011

An automated anastomotic ring-pin system consisting of both the anastomotic ring-pin system and the coupler device has eliminated the drawbacks of the suture method. High density polyethylene (HDPE), a material with outstanding biocompatibility and injection molding capability, was used in the ring. SUS316 stainless steel, Ti-6Al-4Nb, Ti-6Al-4V, and unalloyed titanium were used in FEM simulations of the micropin. The authors categorized the microvascular anastomotic ring micropins into short neck (SN) and long neck (LN) groups in order to evaluate the effect of the micropin's fillet radius and neck length on the von Mises stress. The micropins were further divided into those with and without fillet. On the basis of the fillet radius rate (FRR), which represents the rate of change in the von Mises stress with respect to the availability and shape of the fillet, and the neck length rate (NLR), which represents the rate of change in the von Mises stress with respect to changes in the length of the neck within the fillet shape, it can be concluded that the SN-3 neck design is the most stable.