• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.85-94
• /
• 2003

The asynchronous design methods proved to have the higher performance in power consumption and execution speed than synchronous ones because it just needs to activate the required module without feeding clock in the system. Despite the advantage of CISC machine providing the variable addressing modes and instructions, its execution scheme is hardly suited for a synchronous Pipeline architecture and incurs a lot of overhead. This paper proposes a novel asynchronous pipeline architecture, A80sl, whose instruction set is fully compatible with that of Intel 80C51, an embedded micro controller. We classify the instructions into the group keeping the same execution scheme for the asynchronous pipeline and optimize it eliminating the bubble stage that comes from the overhead of the multi-cycle execution. The new methodologies for branch and various instruction lengths are suggested to minimize the number of states required for instructions execution and to increase its parallelism. The proposed A80C51 architecture is synthesized with 0.35${\mu}{\textrm}{m}$ CMOS standard cell library. The simulation results show higher speed than that of Intel 80C51 with 36 MHz and other asynchronous counterparts by 24 times.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.96-101
• /
• 2024

Background: Silicosis among workers who fabricate engineered stone products in micro or small-sized enterprises (MSEs) was reported from several countries. Workplace exposure data of these workers at high risk of exposure to respirable crystalline silica (RCS) dust are limited. Methods: We surveyed workers performing cutting, shaping and polishing tasks at 6 engineered stone fabricating MSEs in Sydney, Australia prior to regulatory intervention. Personal exposure to airborne RCS dust in 34 workers was measured, work practices were observed using a checklist and worker demography recorded. Results: Personal respirable dust measurements showed exposures above the Australian workplace exposure standard (WES) of 0.1 mg/m³ TWA-8 hours for RCS in 85% of workers who performed dry tasks and amongst 71% using water-fed tools. Dust exposure controls were inadequate with ineffective ventilation and inappropriate respiratory protection. All 34 workers sampled were identified as overseas-born migrants, mostly from three linguistic groups. Conclusions: Workplace exposure data from this survey showed that workers in engineered stone fabricating MSEs were exposed to RCS dust levels which may be associated with a high risk of developing silicosis. The survey findings were useful to inform a comprehensive regulatory intervention program involving diverse hazard communication tools and enforcing improved exposure controls. We conclude that modest occupational hygiene surveys in MSEs, with attention to workers' demographic factors can influence the effectiveness of intervention programs. Occupational health practitioners should address these potential determinants of hazardous exposures in their workplace surveys to prevent illness such as silicosis in vulnerable workers.

• Steel and Composite Structures
• /
• v.25 no.3
• /
• pp.315-326
• /
• 2017

In this work, thermoelastic dynamic behavior of functionally graded carbon nanotube reinforced composite (FG-CNTRC) cylinders subjected to mechanical pressure loads, uniform temperature environment or thermal gradient loads is investigated by a mesh-free method. The material properties and thermal stress wave propagation of the nanocomposite cylinders are derived after solving of the transient thermal equation and obtaining of the time history of temperature field of the cylinders. The nanocomposite cylinders are made of a polymer matrix and wavy single-walled carbon nanotubes (SWCNTs). The volume fraction of carbon nanotubes (CNTs) are assumed variable along the radial direction of the axisymmetric cylinder. Also, material properties of the polymer and CNT are assumed temperature-dependent and mechanical properties of the nanocomposite are estimated by a micro mechanical model in volume fraction form. In the mesh-free analysis, moving least squares shape functions are used to approximate temperature and displacement fields in the weak form of motion equation and transient thermal equation, respectively. Also, transformation method is used to impose their essential boundary conditions. Effects of waviness, volume fraction and distribution pattern of CNT, temperature of environment and direction of thermal gradient loads are investigated on the thermoelastic dynamic behavior of FG-CNTRC cylinders.

• Journal of Korean Neurosurgical Society
• /
• v.47 no.5
• /
• pp.377-380
• /
• 2010

The abducens nerve usually travels from the brainstem to the lateral rectus muscle as a single trunk. However, it has been reported that this nerve could split into branches occasionally. We attempted to show the aberrant course of abducens nerve in a specimen with unilateral duplicated abducens nerve and review relevant literatures. The micro-dissections were performed in a head specimen injected with colored latex under the microscope. The abducens nerve was duplicated unilaterally. This nerve emerged from the pontomedullary sulcus as a single trunk and splitted into two branches in the prepontine cistern. These two separate branches were piercing the cerebral dura of the petroclival region respectively. The slender lower branch passed between the petroclinoid and petrosphenoid ligaments and the thick lower one passed under the petrosphenoid ligament. These two branches united just lateral to the ascending segment of internal carotid artery in the cavernous sinus. The fact that there are several types of aberrant abducens nerve is helpful to perform numerous neurosurgical procedures in the petroclival region and cavernous sinus without inadvertent neurovascular injuries.

• Computers and Concrete
• /
• v.26 no.5
• /
• pp.451-465
• /
• 2020

This paper presents experimental and numerical investigations on mechanical properties of ultra-high-performance fiber-reinforced concrete (UHPFRC) with four types of steel fibers; micro steel (MS), crimped (C), round crimped (RC) and hooked-end (H), in two fiber contents of 1% and 2% (by volume) and two lengths of 13 and 30 mm. Compression, direct tension, and four-point bending tests were carried out on four types of specimens (prism, cube, dog-bone and cylinder), to study tensile and flexural strength, fracture energy and modulus of elasticity. Results were compared with UHPC specimens without fibers, as well as with available equations for the modulus of elasticity. Specimens with MS fibers had the best performance for all mechanical properties. Among macro fibers, RC had better overall performance than H and C fibers. Increased fibers improved all mechanical properties of UHPFRC, except for modulus of elasticity, which saw a negligible effect (mostly less than 10%). Moreover, nonlinear finite element simulations successfully captured flexural response of UHPFRC prisms. Finally, nonlinear regression models provided reasonably well predictions of flexural load-deflection behavior of tested specimens (coefficient of correlation, R² over 0.90).

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.961-969
• /
• 2007

The laser material processing has replaced a conventional material processing such as a welding, cutting, drilling and surface modification and so on. LTH(Laser Transformation Hardening) is one branch of the laser surface modification process. A lot of energy is needed for the LTH process to elevate workpiece surface to temperature of the austenite transformation($A_3$), which results from utilizing a beam with a larger size and lower power intensity comparatively. The absorptivity of the laser energy with respect to material depends on the wave length of a beam. This study is related to the surface hardening for the rod-shaped carbon steel by the high power diode laser(HPDL) whose beam absorptivity is better than conventional types of lasers such as $CO_2$ or Nd:YAG laser. Because a beam proceeds on the rotating specimen the pretreated hardened-phase can be tempered and softened by the overlapping between hardened tracks. Accordingly, the longitudinal hardness measurement and observation of the micro structure was carried out for an assessment of the hardening characteristics. In addition, a hardening characteristics as a hardenability of materials was compared in the point of view of the hardness distribution and hardening depth and width.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.380-384
• /
• 1997

This study was performed to understand the exogenous-water-drop induced thermomechanical effect on the tooth in the free-running Er:YAG laser mode for the proper use of water as a laser energy absorber and coolant in dentistry. The ree-running Er:YAG laser was used in the dental hard tissue ablation study. A Microjet system was employed to dispense precise water drops. Ablation rate, recoil momentum, and temperature rise in the pulp cavity were measured with and without an exogenous water drop on the tooth surface. Exogenous water enhanced ablation rate in the thick tooth in which the ablation rate on the dry surface does not increase linearly but shows plateau. Optimal exogenous water volume was shifted from 2 nl to 4 nl as the laser energy was increased from 48 mJ to 145 mJ. The magnitude of the recoil momentum was increased as the volume of exogenous water increased. The results of this study suggest that we must pay attention to the recoil momentum or recoil pressure study or the optimal and safe usage of water in the dental treatment because these mechanical effects depend on the volume of exogenous water on the tooth surface.

• Laser Solutions
• /
• v.11 no.4
• /
• pp.7-12
• /
• 2008

Laser Transformation Hardening(LTH) is one branch of the laser surface modification processes. A lot of energy is needed for the LTH process to elevate workpiece surface to temperature of the austenite transformation($A_3$), which results from utilizing a beam with a larger size and lower power density comparatively. This study is related to the surface hardening for the rod-shaped carbon steel by the high power diode laser whose beam absorptivity is better than conventional types of lasers such as $CO_2$ or Nd:YAG laser. Because a beam proceeds on the rotating specimen, the pretreated hardened-phase can be tempered and softened by the overlapping between hardened tracks. Accordingly, the longitudinal hardness measurement and observation of the micro structure was carried out for an assessment of the hardening characteristics. In addition, a hardening characteristics as a hardenability of materials was compared in the point of view of the hardness distribution and hardening depth and width.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.48.3-49
• /
• 2016

Current high-resolution IR spectroscopy at ground-based observatories made it possible to observe $3-{\mu}m\;CH_4$ emission lines from the atmospheres of Jupiter, Saturn, and Titan through narrow atmospheric windows avoiding the counterparts of telluric $CH_4$ absorptions if proper Doppler shifts betwen Earth and these planetary objects are provided. We are also expecting low-resolution (R~300) infrared spectra of Jupiter from the upcoming observations by JUNO's infrared $2-5{\mu}m$ spectrograph during the encounter with Jupiter approximately starting from July 4, 2016. Although the spectral resolution is not enough to resolve the $3-{\mu}m$ P, Q, R branch lines of CH4, the gross envelopes of the P, Q, R branches should yield information on rotational temperatures. The rotational temperatures are useful because theycan be regarded as local temperatures, as discussed by Kim et al. (2014). Since the $3-{\mu}m\;CH_4$ emission is mostly formed at micro-bar pressure levels, the derived rotational temperatures represent the local temperatures near the hompause of Jupiter. We discuss possible sciences from the derived homopause temperatures in the auroral and non-auroral regions of Jupiter.

• Steel and Composite Structures
• /
• v.28 no.2
• /
• pp.195-207
• /
• 2018

First-order reliability method (FORM) is enhanced based on the search direction using relaxed conjugate reliability (RCR) approach for the embedded nanocomposite beam under buckling failure mode. The RCR method is formulated using discrete conjugate map with a limited scalar factor. A dynamical relaxed factor is proposed to control instability of proposed RCR, which is adjusted using sufficient descent condition. The characteristic of equivalent materials for nanocomposite beam are obtained by micro-electro-mechanical model. The probabilistic model of nanocomposite beam is simulated using the sinusoidal shear deformation theory (SSDT). The beam is subjected to external applied voltage in thickness direction and the surrounding elastic medium is modeled by Pasternak foundation. The governing equations are derived in terms of energy method and Hamilton's principal. Using exact solution, the implicit buckling limit state function of nanocomposite beam is proposed, which is involved various random variables including thickness of beam, length of beam, spring constant of foundation, shear constant of foundation, applied voltage, and volume fraction of ZnO nanoparticles in polymer. The robustness, accuracy and efficiency of proposed RCR method are evaluated for this engineering structural reliability problem. The results demonstrate that proposed RCR method is more accurate and robust than the excising reliability methods-based FORM. The volume fraction of ZnO nanoparticles and the applied voltage are the sensitive variables on the reliable levels of the nanocomposite beams.