• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.34-37
• /
• 2001

This research suggested the new algorithm controlled by micro processor which is already stored by various PWM form of output voltage by using fundamental data of the carrier and signal. The determined PWM pattern is not concerned with the signal wave form and the new algorithm can obtain the desired pulse width by synchronous of carrier. The PWM wave can be controlled with real time by using extra hardware and digital software and to speed up program processing, the control signals to switch the power semi-conductor of three phase PWM inverter, simultaneously use the output signal by microprocessor and extra hardware, and control signal by software. In the end, this method was proved by applying to Three phase voltage source inverter.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.90-93
• /
• 2006

본 논문에서는 자율신경망 중 ART2(Adaptive Resonance Theory 2)를 이용하여 지문의 매칭알고리즘에 적용하였다. 지문의 영상을 센서로부터 입력 받아, 전 처리와 후처리 과정을 거친 후 각각의 지문에 대한 특징값을 구하고, 지문 영상을 분류 및 매칭 할 수 있도록 하였다. 다음으로 제시한 알고리즘을 바탕으로 PC(Personal Computer) 없이 독립적으로 사용 할 수 있는 실시간 임베디드 지문 인식 시스템을 구현 하였다. 실시간 임베디드 지문 인식 시스템 설계에 있어 크기와 기능면을 고려해 메인 모듈의 프로세서로 최근 신호 처리에 많이 사용되고 있는 DSP(Digital Signal Processor)를 사용 하였으며, 지문을 입력 받기 위한 센서로는 반도체 지문 센서를 사용하였다. 메인 모듈과 센서를 가지고 간단한 디스플레이 및 통신 테스트를 위해 PIC Micro-Processor를 사용해 컨트롤 보드를 제작하여 간단한 인식 테스트를 하였다. 제작한 보드를 가지고 다양한 어플리케이션이 가능하나, 본 논문에서는 하드웨어나 소프트웨어 개발에 사용 가능한 RDK(Reference Design Kit)를 최종으로 구현하였다.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.227-233
• /
• 2010

This paper treats the method to build up Motor drive-circuit using semi-conduct control part like power transistor, MOSEFT and refers to the operation theory, forward, reverse rotation control and speed control method which is changed by PWM. And also, this paper mention to the basic principle of DC Motor and various Motor control method using micro-processor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.406-406
• /
• 2000

In this study, as a part developing an unmanned container terminal (UCT), Ive designed and implemented an Autonomous Ground Vehicle (AGV) that can deliver containers in the port fast and safely as they are scheduled. It is preferable to research the intelligent UCT/AGV for delivering containers all day long without causing any trouble. For the sake of safe and fast AGV driving, we implemented a multiple-sensor system with vision, ultrasonic, and IR sensors and we adapted the hight-speed wireless LAN that satisfies the IEEE 802.11 Standard for hi-directional communication between the main processor in AGV and a host computer. The Pentium-III processor board mounted on the bottom frame in AGV combines and computes the information from sensors and controls the AGV driving. There are also the 80C196KC micro-controllers to control the actuating and steering motors. In addition, a steering function that is defined newly in this paper is heavily concerned in the mechanical design, and it plays an important role when AGV moves along a curve. Experimental results show the fast and safe delivery operations are possible with this UCT/AGV

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.779-783
• /
• 2004

First this paper introduces an advanced FADEC (Full Authority Digital Electric Control) for current and future jet engines.It is designed to realize not only stable thrust control, but also performance improvement, reliability enhancement, service life extension, etc. It can be built by using current micro-processor with high computational power and there exists no difficulties but reliability problem of the micro- processor. Next, the simulation results of SFC minimization control are shown. The target engine is a supersonic, low-bypass ratio, 2-spool, combined cycle turbofan, designated as HYPR90T, which consists of a turbo engine for under Mach 3 flight and a ram engine for over Mach 3 flight. he results can then be used for performance optimization of the engine, which plays important role in the advanced FADEC.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2216-2218
• /
• 2001

Microchip사의 PIC Family 계열 마이크로프로세서 PIC16C74A를 이용하여 다수의 모터를 on/off 제어하는 컨트롤 보드의 제작과 함께 RS-485 Multi-drop 통신을 이용하여 분산제어 할 수 있는 프로토콜의 선정 및 상위 단 제어 솔루션 개발을 하였다. 프로그램은 하위단 컨트롤보드의 ASM과 함께 Visual BASIC 및 $C^{++}$을 이용하여 상위단 MMI(Man-Machine Interface)를 설계하였다. 본 연구는 여러 개의 장치를 on/off 제어할 수 있는 분산제어네트워크를 경제적으로 설계함으로써 상용화 가능하다는 장점이 있다.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.155-158
• /
• 2000

In this paper, For operator's conveniency of the mobile robot, achieved the system which control the robot by adopting the speaker independently isolated word recognition and by implementing the real time with TMS320C31. and This paper using the Tri-ultrasonics range finder to detect obstacles and implements the mobile robot. In this paper, DSP processor (TMS320C31) is used signal processing for speech recognition in the real time and Micro processor(80C196KC) is controling the ultrasonics range finders.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.220.2-220.2
• /
• 2005

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.45-51
• /
• 2008

HID(High Intensity Discharge) search lamp for shipment requires a high open circuit and output current compare than vehicle. This paper presents a soft-start open circuit voltage and constant current sequence control method for 2.5[kW] HID search lamp. The proposed method controls the opal circuit voltage and discharge current of HID lamp according to ignition signal with a simple 8-bit micro-processor and PWM device. For the stable control of lamp, micro-processor checks the output voltage and current. And the checked signals are compared with ignition signal and changes the control mode for stable operation. An ignition signal and micro-processor change the control mode from open circuit voltage contort to constant current control. The proposed control scheme is verified from experimental tests of 2.5[kW] HID search lamp for shipment.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.451-453
• /
• 2007

This paper describes the design of an asynchronous implementation of a sensor network processor. The main purpose of this work is the reduction of power consumption in sensor network node processors and the research presented here tries to explore the suitability of asynchronous circuits for this purpose. The Handshake Solutions toolkit is used to implement an asynchronous version of a sensor processor. The design is made compact, trading area and leakage power savings with dynamic power costs, targeting the typical sparse operating characteristics of sensor node processors. It is then compared with a synchronous version of the same processor. Both versions are then compared with existing commercial processors in terms of power consumption.