• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1527-1530
• /
• 2009

A LCoS micro-display using polymer dispersed liquid crystals (PDLCs) for light switching layer was fabricated. The Si backplane of SVGA ($800{\times}600$) with a pixel size of $14{\times}14mm^2$ was prepared by a $0.35{\mu}m$ 18V CMOS process. PDLCs were filled in the gap between backplane and ITO glass by conventional vacuum filling method. The prepared panels were driven by a field sequential color (FSC) scheme at the frequency of 180Hz and were successful in modulating LED lights to show projection images. The preparation and performance of PDLC-LCoS are presented.

• 인포메이션 디스플레이
• /
• 제21권1호
• /
• pp.21-26
• /
• 2020

• 인포메이션 디스플레이
• /
• 제24권4호
• /
• pp.19-25
• /
• 2023

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1885-1888
• /
• 2003

As high technology industries such as IT and display have developed, demand for application parts of micro lens and lens array has been extremely increasing. According to these trends, many researchers are studying on the fabrication technology for parts of the micro lens by a variety of methods such as MEMS, Lithography, LIGA and so on. In this paper, we have performed researches related to ultra precision micro lens, lens array mold and fabrication of Lenticular lens mold for three-dimensional display by using mechanical micro end-milling and fly-cutting fabrication method. Tools used in this research were a diamond tool of R 150$\mu\textrm{m}$. Cutting conditions set up feed rate, spindle revolution. depth of cut and dwell time as variables. And we analyzed surface quality variation of the processed products according to the cutting conditions, and then carried out experiments to search the optimum conditions. Through this research, we have confirmed that we can fabricate the ultra precision micro lens mold with surface roughness Ra=20nm and the holographic lens mold by using micro end-milling and fly-cutting fabrication method. Furthermore, we demonstrated problems happened in the fabrication of the micro lens and established the foundation of experimental study for formulating its improvement plan.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.917-920
• /
• 2006

In an attempt to reduce processing cost and to improve resolution of PDPs, micro mold transfer processing route for barrier ribs of plasma display panel was developed. In this study, the parameters that may cause defects during the process were identified, which include the shrinkage during UV curing process, stress due to evaporation of organic components, and sintering shrinkage. Considering such parameters, UV curable paste was developed and barrier ribs of PDPs were successfully processed via the process. In addition, the process was successfully applied for the processing of barrier ribs with embedded counter electrodes.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제2권1호
• /
• pp.15-22
• /
• 2002

This paper is concerned about an Accelerated Life Test for Micro Display Device which is being used in a Projection TV, in order to find a failure mode occurred in field in a short time, to identify a major factor to affect a life, and to estimate a mean life. For this purpose, we selected a temperature as a accelerated factor to perform a test and measured degradation of display device using visual inspection and chromaticity table. In the result of Accelerated Life Test, it is confirmed that failure mode is equal to the degradation of display device by vendor and the Temperature is a major factor to affect a failure. Besides, according as the display device is turned to green as degraded, it is identified that the change of the chromaticity value is one method to measure the degree of the degradation . So, we applied the optimal condition, which consider a cost and life to lower the Temperature which is a major factor acquired by the result of ALT, to PTV design

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.87-90
• /
• 2010

A new SRAM pixel circuit with RESET Transistor of a LCOS display module was designed for a pico-projector application. A dual-block PWM method was also proposed to realize the field sequential color system having only one LCOS panel. 0.29 inch LCOS panel in SVGA resolution was fabricated and the proposed dual-block PWM method was tested with it. Discontinuity of brightness curve was caused due to multi-pulses and it was improved by the adoption of proper mapping table. With the proposed SRAM with RESET pixel circuit and dual-block PWM method, the test images were successfully demonstrated.

• 반도체디스플레이기술학회지
• /
• 제15권3호
• /
• pp.6-11
• /
• 2016

Silicon wafer is one of main materials in solar cell. Micro-cracks in silicon wafer are one of reasons to decrease efficiency of energy transformation. They couldn't be observed by human eye. Also, their shape is not only various but also complicated. Accordingly, their shape classification is absolutely needed for manufacturing process quality and its feedback. The performance of typical classification techniques which is principal component analysis(PCA), neural network, fusion model to integrate PCA with neural network, and support vector machine(SVM), are evaluated using pattern features of micro-cracks. As a result, it has been confirmed that the SVM gives good results in micro-crack classification.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.62-65
• /
• 2018

We will provides a micro-pump infusion injector with the cloud networking for remote control. The existing infusion injector with controlled manually have an uncomfortable to use it inconveniently. The proposed remote control infusion, infusion system enables the identification and control of injected amount through the IOT function on th WEB. The micro-pump used is a piezo electric pump manufactured by using MEMS technology, and the amount of charge is varied depending on the frequency magnitude through the micro-controller. The micro-pump can adjust the speed of the fluid depending on the frequency and can be from 0.1ml / min to 7ml / min when the frequency is from 3 to 110Hz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1413-1416
• /
• 1995

Plasma Display(PDP) was successfully demonstrated on 30-60inch display panel. Research for mass production is also been accelerating. The basic study of PDP are mainly focused on understanding of micro discharge in each cell In this paper, DC PDP with Ag electrode is made and the discharge charcateristics in micro gap is studied with the variation of the distance of electrode gap and the pressure in discharge cell.