• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.156-156
• /
• 2017

Most crop damages have been occurred by vermin(e.g., wild birds and herbivores) during the period between seeding and the cotyledon level. In this study, to minimize the damage by vermin and acquire the benefits such as protection against weeds and maintenance of water content in soil, immediately vinyl mulching after seeding was devised. Vinyl mulching has been generally covered with black color vinyl, that crop seeding locations cannot be detected by visible light range. Before punching vinyl, non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. For this study, the spline method was relatively faster than the other polynomial interpolation methods, because it has a lower maximum order of formulation when using a system such as the tridiagonal linear equation system which provided the capability of real-time processing. The temperature distribution corresponding to the distance between the crops was 10 cm, and the more clearly the leaf pattern of the crop was visually confirmed. The frequency difference was decreased, as the number of overlapped pixels was increased. Also the wave pattern of points where the crops were recognized were reduced.

• 분석과학
• /
• 제17권4호
• /
• pp.355-362
• /
• 2004

하나로 원자로에서 조사된 최대 선출력이 121 kW/m이고, 63 at%의 평균 연소도를 갖는 $U_3Si-Al$ 원심 분무 고출력 핵연료를 EPMA를 이용하여 파단면 관찰 및 반응층에 대한 핵분열 생성물을 분석 하였다. 조사된 고출력 $U_3Si-Al$ 핵연료를 EPMA로 화학 조성을 분석하기 위해 선행조건은 방사능 허용 한도가 $3{\times}10^{10}Bq$ 이하로 제한되는 EPMA 기기에 부합 될 수 있게 시험 시편을 최소화 하기 위한 작업이다. 시험 조건에 부합될 수 있는 시편의 제조를 위해 핵연료 천공 장치를 제작하였으며, 천공 장치를 사용하여 ${\Phi}1.57{\times}2mm$의 크기를 갖는 시료를 만들었다. 천공 된 시료를 파단 시편과 연마 시편으로 제조하여 파단면의 관찰 및 반응층(Inter-reaction layer)과 산화층에 대한 EPMA 분석을 수행하였다. 두께가 $16{\mu}m$인 반응층에 대한 평균값은 $UO_2$를 표준 시편으로 calibration한 경우의 조성은 $U_{2.84}$ Si $Al_{14}$ 이였으며, 시험 시편으로 calibration한 경우의 조성은 $U_{3.24}$ Si $Al_{14.1}$ 였다. 또한 반응층에서 핵분열 생성물의 조성을 분석하였으며, 반응층에서의 금속 석출물(metallic precipitates)의 생성은 확인할 수 없었다. 시험 시편의 산화층 조성은 $Ai_2O_3$ 임을 확인했다.