• 제목/요약/키워드: MgSrO

검색결과 327건 처리시간 0.066초

PDP 보호막용 MgO 박막의 저전압 특성에 미치는 알카리토금속산화물 첨가 효과 (Effect of Alkaline Earth Metal Oxides addition on the Low-voltage Characteristics of MgO Films as a Protective layer for AC PDPs)

  • 조진희;김락환;김정열;이유기;김희재;박종완
    • 한국재료학회지
    • /
    • 제9권5호
    • /
    • pp.441-445
    • /
    • 1999
  • Alkaline earth metal oxides were added to the conventional MgO films as a protective layer for dielectric materials to have lower firing voltage(Vf) of the plasma display panel(PDP). Panels with various protective layers of MgO-alkaline earth metal oxides were prepared on glass by using e-beam evaporation and its effect on firing voltage characteristics were investigated. (Ba-Mg)O films had poor voltage characteristics because of higher activation energy of BaO. But, (Sr-Mg)O, (Ca-Mg)O and (Ca-Sr-Mg) O had better voltage characteristics than the conventional MgO. A mixture film of (Mg-Ca-Sr)O show the lowest firing voltage which is less than that of MgO by 20V. The chemical composition to have lowest firing voltage is MgO:SrO:CaO ratio of 6:2:2. The mixture of MgO-Alkaline earth metal oxides films showed good transmittance properties within the visual range.

  • PDF

LED용 Sr3MgSi2O8:Eu청색 형광체의 발광특성 (Luminescence Characteristics of Sr3MgSi2O8:Eu Blue Phosphor for Light Emitting Diodes)

  • 최경재;박정규;김경남;김창해;김호건
    • 한국세라믹학회지
    • /
    • 제41권8호
    • /
    • pp.573-577
    • /
    • 2004
  • Eu$^{2+}$를 활성제로 Sr$_3$MgSi$_2$ $O_{8}$ 청색 형광체를 합성하고, Sr$_3$MgSi$_2$ $O_{8}$:Eu 청색 형광체를 InGaN의 UV chip에 도포하여 청색 LED Lamp를 제조하였다. 제조된 청색 LED Lamp는 405nm와 460nm에서 두 개의 파장을 나타내고 있다. 405nm의 파장은 InGaN의 활성영역으로부터의 radiative recombination 때문에 나타나는 피크이다. 여기에서 나오는 405nm의 발광은 본 Sr$_3$MgSi$_2$ $O_{8}$:Eu 청색 형광체의 여기원으로 사용된다 460nm에서의 발광 밴드는 Sr$_3$MgSi$_2$ $O_{8}$ 모체내에서 Eu$^{2+}$ 이온의 radiative recombination에 의한 것이다. 발광효율이 좋은 Sr$_3$MgSi$_2$ $O_{8}$:Eu 청색 형광체를 이용하여 UV 청색 LED Lmp를 제조한 결과, 에폭시와 청색 형광체의 무게 비율이 1$.$0.202에서 가장 좋은 광도값을 얻을 수 있었다. 이때 색좌표는 CIE x=0.1417, CIE y=0.0683이었다.

(1-x)MgxSr$TiO_3$(x=0.03~0.04) 세라믹스의 마이크로파 유전특성 (Microwave Dielectric Properties of the (1-x)MgxSr$TiO_3$(x=0.03~0.04) ceramics)

  • 최의선;이문기;류기원;배선기;이영희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 추계학술대회 논문집
    • /
    • pp.547-550
    • /
    • 2000
  • The (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.03~0.04) ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 125$0^{\circ}C$~135$0^{\circ}C$, 2hr., respectively. From the X-ray diffraction patterns, it was found that the perovskite SrTiO$_3$ and ilmenite MgTiO$_3$ structures coexisted in the (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.03~0.04) ceramics. The dielectric constant($\varepsilon$$_{r}$) was increased with addition of SrTiO$_3$. The temperature coefficient of resonant frequency($\tau$$_{f}$) was gradually varied from negative value to the positive value with increasing the SrTiO$_3$. The negative temperature coefficient of resonant frequency of the magnesium titanate was adjusted to near zero at x=0.036, where the dielectric constant, quality factor, and $\tau$$_{f}$ were 20.65, 95120, and +1.3ppm/$^{\circ}C$, respectively. The temperature stability of qualify factor in (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.03~0.04) ceramics increased as the amount of MgTiO$_3$./TEX>.

  • PDF

Ca 함량 및 Sr 치환량의 변화에 따른 Mg-Ca-Sr-Ti-O계 세라믹스의 마이크로파 특성 (Effect of Ca Contents and Sr Substitutions on Microwave Characteristics of Mg-Ca-Sr-Ti-O System Ceramics)

  • 류현위;유완식;정하창;김배연
    • 한국세라믹학회지
    • /
    • 제43권5호
    • /
    • pp.284-292
    • /
    • 2006
  • $MgTiO_3{\cdot}CaTiO_3{\cdot}SrTiO_3$ system ceramics (MCST) were synthesized to study the effect of Ca addition amount and Sr substitution on temperature coefficient of resonance sequency. Temperature coefficient of resonance frequency was slightly increased by small amount ($i.e.{\sim}5%$) of Sr substitution. In case of 50% to 75% addition amount of $MgTiO_3$, decrease of quality factor was not observed with increasing dielectric constant.

$\textrm{SrTiO}^3$ 와 과잉 MgO가 첨가된 $\textrm{Pb(Mg_{1/3}Nb_{2/3})O}_3$ - $\textrm{PbTiO}^3$ 계 세라믹스의 유전 및 변위 특성 (Dielectric and Strain Properties of PMN-PT Ceramics Doped with $\textrm{SrTiO}^3$ and excess MgO)

  • 이상훈
    • 전자공학회논문지T
    • /
    • 제36T권3호
    • /
    • pp.7-12
    • /
    • 1999
  • 본 논문은 (1-x-y)PMN-yPT-xST세라믹스의 유전 및 변위특성을 ST의 양에 따라 조사하였다. ST의 성분은 1∼ 6㏖%이내로 변화시켰고 과잉 MgO에 따른 조성변화에 따라 결과를 조사하였다. ST의 성분의 증가에 따라 유전상수는 5㏖%인 조성에서 최대값을 나타내었다. 큐리온도는 ST의 성분이 증가함에 따라 선형적으로 감소하였다. 항전계와 잔류분극은 l㏖%인 조성에서 최대값을 나타내었다. 과잉 MgO의 효과에 따라 유전상수는 0.8PMN-0.12PT-0.04ST조성에서 MgO를 3㏖%까지 과잉 첨가함에 따라 증가하였으나 변위특성은 감소함을 나타내었다.

  • PDF

$\textrm{Y}_{0.8}\textrm{Ta}_{0.2}\textrm{O}_{1.7}$-MO(M=Ba, Sr, Ca 및 Mg)계에 있어서 형석구조의 생성 (Formation of the Fluorite Structure in the $\textrm{Y}_{0.8}\textrm{Ta}_{0.2}\textrm{O}_{1.7}$-MO(M=Ba, Sr, Ca and Mg) System)

  • 김신;최순목;이홍림
    • 한국재료학회지
    • /
    • 제7권1호
    • /
    • pp.57-61
    • /
    • 1997
  • $Y_{0.8}Ta_{0.2}O_{1.7}$-MO(M=Ba, Sr, Ca 및 Mg) 계에서의 형석구조의 생성과 이와 관련된 구조에 관하여 연구하였다. BaO또는 SrO를 4mol% 첨가한 조성에서는 결함형석구조 이외에 입방정 perovskite형 규칙구조인 $Ba_{2}YTaO_{6}$$Sr_{2}YTaO_{6}$와 입방정 $Y_{2}O_{3}$가 관찰되었다. CaO를 첨가한 경우에는 8mol%이상을 첨가한 조성에서부터 단사정 $Ca_{2}YTaO_{6}$$Y_{2}O_{3}$의 2차상이 나타났다. MgO의 경우에는 12mol% MgO를 첨가한 조성까지는 형석구조의 단일상을 나타내어 MgO가 형석구조에 고용되는 것을 알수 있었으며, 16 mol%조성부터는 2차상으로 MgO가 관찰되었다. 그러므로 위의 계에서 형석구조의 생성은 $A_{2}$(B'B")$O_6$의 생성과 첨가된 양이온의 크기에 영향을 받는 것으로 생각된다.생각된다.

  • PDF

소결온도에 따른 (1-x)Mg$TiO_3$-xSr$TiO_3$(x=0.02~0.08)세라믹스의 마이크로파 유전특성 (Microwave Dielectric Properties of the (1-x)Mg$TiO_3$-xSr$TiO_3$(x=0.02~0.08)Ceramics with Sintering Temperature)

  • 최의선;이성갑;배선기;이영희
    • 한국전기전자재료학회논문지
    • /
    • 제13권12호
    • /
    • pp.1011-1016
    • /
    • 2000
  • The (1-x)MgTi $O_3$-xSrTi $O_3$(x=0.02~0.08) ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 125$0^{\circ}C$~1375$^{\circ}C$ and 2hours. The structure and microwave dielectric properties were investigated with sintering temperature and composition ratio. From the X-ray diffraction patterns, the cubic SrTi $O_3$and hexagonal MgTi $O_3$structures were coexisted in the (1-x)MgTi $O_3$-xSrTi $O_3$(x=0.02~0.08) ceramics. The dielectric constant($\varepsilon$$_{r}$) was increased and the temperature coefficient of resonant frequency($\tau$$_{f}$)was decreased with addition of SrTi $O_3$. The temperature coefficient of resonant frequency($\tau$$_{f}$) was gradually varied from negative value to positive value with increasing SrTi $O_3$. In the case of 0.96MgTi $O_3$-0.04SrTi $O_3$ceramics sintered at 130$0^{\circ}C$, the dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.5, 5918(at 7.33GHz) and +10ppm/$^{\circ}C$, respectively.y.y.y.

  • PDF

$(Pb_{1-(x+y)}Ca_xM_y)ZrO_3(M=Mg, Sr)$계의 고주파 유전특성 (Microwave Dielectric Properties of $(Pb_{1-(x+y)}Ca_xM_y)ZrO_3(M=Mg, Sr)$ Ceramics)

  • 배규식;김경용
    • 한국재료학회지
    • /
    • 제6권11호
    • /
    • pp.1121-1126
    • /
    • 1996
  • (Pb0.63Ca0.37)ZrO3 세라믹에 MgO와 SrO를 첨가하여 Ca를 Mg와 Sr 이온으로 치환하였을 때의 고주파 유전특성에 대해 연구하였다. Ca 이온의 일부를 Mg 이온으로 치환시킨 경우에는 A-O결합에 의한 분극의 증가로 인하여 유전상수는 직선적으로 증가하지만 품질계수는 감소한다. 또한 Ca 이온을 Sr 이온으로 치환시킨 경우에는 결합길이의 증가로 인해 분극이 감소되어 유전상수와 품질계수가 감소한다. 고주파용 유전재료의 설계에 있어서 관용인자와 이온결합성의 평가가 중요하다.

  • PDF

MgO의 첨가량에 따른 $Ba_{0.5}Sr_{0.5}TiO_3$의 구조적, 유전적 특성 (Structural and Dielectric Properties of $Ba_{0.5}Sr_{0.5}TiO_3$ with Addition MgO)

  • 유희욱;안호명;구상모;남송민;이영희;고중혁
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.296-297
    • /
    • 2006
  • A conventional oxide method was used to fabricate $Ba_{0.5}Sr_{0.5}TiO_3$(BST) ceramic plates doped by MgO from 10 to 60 wt%. The structural and dielectric properties of BST were investigated as a fraction of MgO dopant concentration. The dielectric properties of the MgO doped BST were strongly dependent on the MgO contents. The dielectric constant and dielectric loss of MgO doped BST decreased with increasing MgO content.

  • PDF

LSGM 전해질과 LSM 양극의 합성분말을 이용한 SOFC 단위전지의 특성 (Cell Properties for SOFC Using Synthesized Powder of Electrolyte LSGM System and Cathode LSM System)

  • 이미재;남중희;최병현
    • 한국세라믹학회지
    • /
    • 제39권4호
    • /
    • pp.359-366
    • /
    • 2002
  • 고체산화물 연료전지의 운전온도를 낮추기 위해 구성재 중 LSGM 전해질과 LSM 양극을 합성하고, 그 특성을 조사한 후 최적 조성과 공정으로 단위전지를 제작하고 출력을 측정하였다. 전해질 조성인 $(La_{0.85}Sr_{0.15})(Ga_{0.8}Mg_{0.2})O_{3-\delta}와 (La_{0.8}Sr_{0.2})(Ga_{0.8}Mg_{0.2})O_{3-\delta}$$1500^{\circ}$에서 6시간 소결한 경우 두 조성 모두 $LaGaO_3$의 단일상을 형성하였고, $10∼3{\mu}m$의 결정 크기를 갖는 치밀한 미세구조를 얻었으며, 저기전도도는 $800^{\circ}$에서 0.13S/cm를 나타내었다. 양극의 경우 GNP법으로 $(La1-xSrx)MnO_3$를 합성한 경우 Sr의 양이 0.2mole일 때까지는 $LaMnO_3$ perovskite 단일상이 생성되었으며, 입자의 크기는 약 40nm였다. 단위전지는 $(La_{0.8}Sr_{0.2})(Ga_{0.8}Mg_{0.2})O_{3-\delta}$ 조성으로 소결한 전해질 양면에 $(La_{0.9}Sr_{0.1})MnO_3$ 양극과 음극의 입자크기는 $1{\mu}m$ 정도였고 다공성을 나타내었다. 이때 단위전지의 출력은 $800^{\circ}$에서 약 $0.3W/cm^2$를 나타내었다