• Journal of Information Display
• /
• 제8권2호
• /
• pp.25-31
• /
• 2007

MgO thick film for ac-PDPs was formed via electrophoresis deposition process and its effect on luminance and luminance efficiency were evaluated. The electrophoresis deposition process of MgO thick film was optimized through parametric study and defects levels in MgO powders was evaluated using cathodoluminescence spectra measurements. The results demonstrate a possibility of using MgO thick film as electron emission layer for ac-PDPs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.228-231
• /
• 2002

We report the effect of density of thin films on moisture adsorption and hydration of MgO thin film, usually used as a protective layer in AC-PDP After hydration, lots of hemispherical shaped clusters, $Mg(OH)_2$, formed on the surface of MgO thin films. However clusters formed on low-density thin films were bigger than those on high-density films. From ERD spectra, it seemed that the concentration of hydrogen was very high in the region 20 nm from the surface of MgO thin film. The low-density thin film had more hydrogen than high-density thin film. From simulation results of ERD and RBS it was found that hydration reaction also occurred in the inner part of the film. So diffusion of Mg atoms from the inner part of the film to the surface and $H_2O$ molecules from the surface to the inner part of the film is important. And because low density thin film has many short paths for diffusion of Mg atoms and $H_2O$ molecules, low-density thin film is more hydrated. So to suppress hydration of MgO thin films, high-density thin film is needed.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.24-29
• /
• 2000

MgO thin films were deposited on soda lime glass substrates by rf magnetron sputtering using a MgO target at various oxygen flow ratios in order to probe the relationship between MgO film properties and discharge characteristics. MgO films have a tendency to form microstructures with a preferred growth orientation of (200) with increasing oxygen flo ration up to 0.1 $O_2$/(Ar+$O_2$). MgO film obtained at 0.1[$O_2$/(Ar+$O_2$)] was found to be fully stoichiometric. The stoichiometric MgO film was observed to have relatively very clean surface and grains of large size and contain almost no hydroxyl group. The AC PDP with fully stoichiometric MgO film showed lower firing and sustain voltages than those with magnesium-rich or oxygen-rich MgO films, being largely attributed to the larger grain size and the minimized hydroxyl group.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.673-678
• /
• 2009

The effect of MgO buffer layer on the structural properties of sputter-grown ZnO thin film was investigated. Sapphire (0001) and Si (100) substrate were used for the growth and MgO buffer layer was inserted between ZnO thin film and the substrate. X-ray diffraction pattern indicated that enhanced crystallinity in the ZnO thin film grown was achieved by inserting very thin MgO buffer layer, regardless of the substrate type. The strain in the ZnO thin film could also be controlled by the insertion of the MgO buffer layer, and tendency of the strain was strongly dependent on the substrate type.

• 한국진공학회지
• /
• 제9권2호
• /
• pp.144-149
• /
• 2000

Cu(4.5at.% Mg) target을 이용하여 sputtering에 의해 증착된 Cu(Mg) alloy박막의 열처리시 형성되는 산화 방지막 MgO의 박막 특성에 영향을 주는 인자에 대해 살펴보았다. MgO 박막의 산화방지 능력 및 막질에 영향을 주는 인자로는 열처리 온도, $O_2$ 압력, Mg 농도 등으로 나타났다. MgO 박막의 두께는 열처리 온도가 증가함에 따라 증가하다 $500^{\circ}C$ 이상에서는 150 $\AA$ 정도의 성장한계두께를 나타내었다. 표면에 형성되는 MgO 박막은 $O_2$압력이 낮을수록, Mg의 농도가 높을수록 치밀한 MgO가 형성되어 산화방지에 우수한 특성을 보였으며 전 열처리 과정인 진공 열처리 공정은 1at.%정도의 낮은 Mg 농도에서도 치밀한 MgO형성에 매우 효과적임이 확인되었다. 본 연구에서 Cu(Mg) alloy박막의 열처리를 통해 낮은 저항의 Cu박막의 형성과 동시에 산화방지에 우수한 특성을 보이는 MgO 박막을 열처리 온도, $O_2$ 압력, Mg 농도 등의 최적조건을 이용하여 얻어질 수 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.373-379
• /
• 1997

A study on the deposition and characterization of BaTiO3 thin films on MgO-buffered Si(100) substrates by sputtering was conducted. The MgO buffer layers were investigated as a function of deposition temperature. At lower substrate temperature, the MgO layers were not fully crystalline, but a crystallized MgO layer with (001) preferred orientation was obtained at the substrate temperature of $700^{\circ}C$. Partially (00ι) or (h00) textured BaTiO3 films were obtained on Si(100) with the MgO buffer layer grown at 700ι. While, randomly oriented BaTiO3 films with large-scale cracks on the surface were made without the MgO layer. The crystallographic orientation, morphology and electrical properties between the BaTiO3 films on Si with and without the MgO layer were compared using the BaTiO3 film on MgO(100) single crystal substrate as a reference system. Also the favorable role of the MgO layer as a buffer for growing of oriented BaTiO3 films on Si substrates was confirmed.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.547-550
• /
• 1999

Optical and electrical properties of MgO-CaO films as a protective layer for AC plasma display panel were studied. When the [(CaO/(MgO+CaO)] ratio of evaporation starting materials was optimum composition, 0.1, firing voltage and memory margin of the film were 176V and 0.5, respectively. When [CaO/(CaO+MgO)] was 0, 0.1 and 0.2, memory margin was 0.39, 0.5 and 0.41, respectively, and surface roughness of films was $27.7\AA$, $21.1\AA$ and $40.3\AA$, respectively. It was thought that memory margin had a reverse-relation with surface roughness. The density of film was calculated by measuring the refractive index of film. The density of MgO film was 3.21g/㎤ and the density of film, when [CaO/(CaO+MgO)] was 0.1, was 3.632g/㎤. The mixture of MgO-CaO films showed a good transmittance property in the visual range.

• 한국진공학회지
• /
• 제10권4호
• /
• pp.396-402
• /
• 2001

전자빔 증착기를 이용하여 1000 $\AA$의 두께를 가진 MgO박막을 구리 기판위에 상온에서 증착하였다. 스퍼터링수율 측정시 MgO 층에 충전현상을 없애주기 위해서 1000 $\AA$ 두께의 Al을 증착하였다. 갈륨 액체금속을 집속이온빔 이온원으로 사용하였다. 두 개의 정전렌즈를 사용하여 이온빔을 집속하였고, MgO에 이온빔을 주사하기 위해 편향기를 사용하였다. 가속전압의 변화에 따라 시료대 전류와 이차입자 전류를 측정하였고, 이 전류값은 소스에 인가하는 가속전압에 따라 변화되었다 MgO 박막의 스퍼터링 수율은 분석된 시료대 전류, 이차입자 전류 및 순수빔 전류의 값을 사용하여 결정하였다. 집속이온빔 장치의 가속전압이 15 kV일 때 MgO 박막의 스퍼터링 수율은 0.30으로 나왔고 가속전압의 값이 증가할 때 스퍼터링 수율이 선형적으로 증가하였다. 이러한 결과를 볼 때 집속이온빔 장치를 이용하면 MgO 박막의 스퍼터링 수율을 측정할 패 매우 효과적임을 알 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.22-25
• /
• 2002

In this paper, we deposited MgO buffer layer on p-type (100)Si substrate in the condition of substrate temperature 400$^{\circ}C$, working gas ratio Ar:O$_2$=80:20, RF Power 50W, working pressure 10mtorr, and the thickness of the film was about 300${\AA}$. Then we deposited Ba$\sub$0.5/Sr$\sub$0.5/TiO$_3$ thin film using RF Magnetron sputtering method on the MgO/Si substrate in various RF power of 25W, 50W, 75W. The film deposited in 50W showed the best crystalline from the XRD measurement. To know the electrical properties of the film, we manufactured Al/BSTMgO(300${\AA}$)/Si/Al structure capacitor. In the result of I-V measurement, The leakage current density of the capacitor was lower than 10$\^$-7/A/$\textrm{cm}^2$ at the range of ${\pm}$150kV/cm. From C-V characteristics of the capacitor, can calculate the dielectric constant and it was 305. Finally we deposited BST thin film on bare Si substrate and (100)MgO substrate in the same deposition condition. From the comparate of the properties of these samples, we found the properties of BST thin film which deposited on MgO/Si substrate were better than on bare Si substrate and similar to on MgO substrate.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.22-26
• /
• 2021

Thin-film encapsulation (TFE) technology is most effective in preventing water vapor and oxygen permeation in the organic light emitting diodes (OLED). Of those, a laminated structure of Al₂O₃ and MgO were applied to provide efficient barrier performance for increasing the stability of devices in air. Atomic layer deposition (ALD) method is known as the most promising technology for making the laminated Al₂O₃/MgO and is used to realize a thin film encapsulation technology in organic light-emitting diodes. Atomic layer deposited inorganic films have superior barrier performance and have advantages of excellent uniformity over large scales at relatively low deposition temperatures. In this study, the control system of the MgCP₂ precursor for the atomic layer deposition of MgO was established in order to deposit the MgO layer stably by the injection time of second level and the stable heating temperature. The deposition rate was obtained stably to be from 4 to 10 Å/cycle using the injection pulse times ranging from 3 to 12 sec and a substrate temperature ranging from 80 to 150 ℃.