• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1576-1578
• /
• 2001

In this paper, a short-term test method to diagnose and estimate the lifetime of AC PDP(Plasma Display Panel) has been proposed. As using this method, we investigated the lifetime of MgO layer in AC PDP. The lifetime was increased in proportion to an MgO thickness but it was allowed when the MgO thickness was raised until 5000$\AA$. Over 5000$\AA$, the lifetime was saturated with a thickness of MgO layer.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1096-1098
• /
• 1999

The performance of as plasma display panels (PDP) is influenced strongly by the surface glow discharge characteristics on the MgO thin films. This paper deals with the optimum preparation conditions of MgO Protecting layer by RF unbalanced magnetron sputtering(UBMS) in surface discharge type AC PDP. The samples prepared with the do bias voltage of -10V showed lower discharge voltage, lower erosion rate as a consequence of ion bombardment, higher optic transparency and higher crack resistance in annealing process than those samples prepared by conventional magnetron sputtering or E-beam eraporation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.216-219
• /
• 2007

Effects of aging treatment of doped-MgO electron emission layer on luminance efficiency of ac-PDP were investigated in this study. Morphological and luminance efficiency with aging treatment were examined, especially with emphasis on the effects of doping elements. The results indicate that the luminance efficiency of test panels depends on the type of doping elements used for MgO and that may be due to the redeposition of MgO during glow discharge.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.220-223
• /
• 2007

The key role of MgO is well recognized in PDP's technology. During manufacturing, significant contamination of the oxide occurs. Getters can compete against the impurities sorption speed of the oxide layer. The analysis of the impact of a suitable getter configuration on the operational parameters of PDP's is the final goal of this study.

• Journal of Korea Foundry Society
• /
• v.27 no.3
• /
• pp.126-130
• /
• 2007

Oxidation behavior of CaO added Mg and Mg-5Al alloys was investigated. At $500^{\circ}C$, oxidation rate of pure Mg was abruptly increased, while that of CaO added Mg was remarkably reduced with increasing CaO content. As a result of surface analysis by AES, there was the thin oxide layer mixed with MgO and CaO in CaO added Mg. Oxidation behavior of CaO added Mg was similar to that of Ca added Mg. Oxidation rate of 0.6CaO added Mg-5Al alloy was much lower than that of Mg-5Al alloy at $500^{\circ}C$ and both alloys showed the linear weight change at $400^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1301-1307
• /
• 1998

For dolomite clinkers used as stamp materials the corrosion behavior of those by molten steel was investigated in therange of temperatures between 1550$^{\circ}C$ and 1600$^{\circ}C$ IN hot face the dicalciumferrite of magnesioferrite and dicalciumferrite formed within dolomite clinkers was preferentially dissolved into molten steel and the protective layer of magnesioferrite was formed. For dolomite clinker without Fe2O3 magnesioferrite maintained the skeleton of MgO while the skeleton of CaO disappered bythe formation of dicalciumferrite and it existed as grain boundary phases of magnesioferrite. For dolomite clinker with Fe2O3 was diffused into hot face by the decomposition of dicalciumferrite. With increasing temperature of molten steel the formation depth of dicalciumferrite was increased and the magnesioferrite layer in hot face was decreased for dolomite clinker without Fe2O3 while the layer thickness and grain sizes of magnesioferrite in hot face was decreased for dolomite clinker without Fe2O3 while the layer thickness an grain sizes of magnesioferrite in hot face was increased due to the increment of the decomposition reaction of dicalciumferrite for dolomite clinker with Fe2O3.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.234-240
• /
• 2001

The diffusion barrier properties of TiN by using Cu(Mg) alloy film have been investigated. Cu(Mg) alloy film was deposited on air-exposed TiN film. Upon annealing, interfacial MgO of 100 $\AA$ has been formed due to the reaction of Mg with oxygen existed on the surface of TiN. Combined MgO/TiN structure prevented the interdiffusion of Cu and Si up to $800^{\circ}C$. To improve the adhesion of Cu(Mg) alloy film to the TiN, TiN layer was treated by $O_2$ plasma, followed by vacuum annealing at $300^{\circ}C$. It was found that increased oxygen on the surface of TiN film by plasma treatment enhanced segregation of Mg toward the interface, resulting in the formation of dense MgO layer. Improved adhesion characteristics have been formed through this treatment. However, increased power of $O_2$ plasma led to the formation of TiO$_2$ and decreased the Mg content to be segregated to the interface, resulting in the decrease in adhesion property. In addition, the deposition of 50 ${\AA}$ Si on the TiN enhanced the adhesion of Cu(Mg) alloy to TiN without deteriorating the TiN diffusion barrier characteristics.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.161.2-161.2
• /
• 2007

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.197.2-197
• /
• 2000

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.93-93
• /
• 1997