• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.127-131
• /
• 2007

We have measured the Hall conductivity (${\sigma}_{xy}$) of c-axis-oriented $MgB_2$ thin films as functions of temperatures and magnetic fields. We found that the Hall conductivity (${\sigma}_{xy}$) is expressed by the sum of two terms, ${\sigma}_{xy}=C_l/H+C_3H$, where the coefficient $C_1\;and\;C_3$ are independent of the magnetic fields and have positive values. The coefficient $C_1$ is strongly dependent on the temperature, while the $C_3$ is weakly dependent on the temperature. We have obtained that the $C_1$ is proportional to $(1- T/T_c)^n$ with n = 4.2, which is consistent with the data observed in $La_{2-x}Sr_xCuO_4$ superconductors with low anisotropy ratio.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.27-27
• /
• 2005

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1746-1751
• /
• 2015

In this study low voltage Plasma Electrolytic Oxidation (PEO) was utilized to eliminate high voltage PEO drawbacks such as high cost, dimensional deformation and porosity. Low voltage PEO produces a thin coating which causes low corrosion resistance. In order to solve such problem, 0.1~0.6M pyrophosphates were added in a bath containing 1.4M NaOH, and 0.35M Na₂SiO₃. 70 V PEO was conducted at 25℃ for 3 minutes. Chemical composition, morphology and corrosion resistance of the anodized coating were analyzed. The anodized film was composed of MgO, Mg₂SiO₄, and Mg₂O₇P₂. The morphology of film showed appropriately dense structure and low porosity in the anodized layers. It is found that low voltage Plasma Electrolytic Oxidation in cooperation with phosphating treatment can provide a good corrosion protection for the AZ31B magnesium alloy.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.85-90
• /
• 2007

Lanthanum aluminate($LaAlO_3$) film has been prepared on single crystal and metal substrates by dip coating method. Lanthanum acetate and aluminum were prepared via ligand exchange starting from lanthanum nitrate hexahydrate and aluminum nitrate hexahydrate in acetate glacial acetic acid solution after being refluxed. Coating solution was obtained by diluting the gel with methanol and 2-methoxyethanol to adjust the total cation concentration to 0.67 M. Precursor coated film was prepared by dip-coating with a speed of 25 mm/min on various substrates such as $LaAlO_3$ (001), MgO(001), $SrTiO_3$(001) single crystal, LMO/MgO/Ni-alloy. Thin films have been obtained by heat treating the precursor film at various temperatures from $600^{\circ}C{\sim}900^{\circ}C$ and various heating rate from $0.83^{\circ}C/min{\sim}1.25^{\circ}C/min$ under $Ar/O_2$ mixture containing 1000ppm oxygen. The films have been characterized by scanning electronic microscopy (SEM) and X-ray diffraction (XRD). XRD analysis for the prepared film showed that $LaAlO_3$ thin films with a preferred orientation of (100) plane parallel to substrate surface were obtained at $800^{\circ}C(1.11\;^{\circ}C/min)$ on LMO/MgO/Ni-alloy substrate, but the intensity decreased with the increase of heat treatment temperature.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.40-40
• /
• 2003

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.62-62
• /
• 2007

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1035-1040
• /
• 2003

High $T_{c}$ superconducting B $i_2$S $r_2$CaC $u_2$ $O_{8+d}$ (BSCCO2212) films were prepared by a metallorganic decomposition (MOD) method. The metal organic solution of BSCCO2212 was spin-coated on MgO (100) substrates at 3000 rpm for 1 min. To achieve a high critical current density, we controlled heat-treatment conditions and atmosphere. The films were annealed at temperature 75$0^{\circ}C$ ∼ 80$0^{\circ}C$ in $O_2$ or air. We obtained c-axis orientated BSCCO thin films on MgO substrates. The annealed sample at 77$0^{\circ}C$ with $O_2$ showed the critical temperature about 77 K and critical current denstity of 1.19 ${\times}$ 10$^{5}$ A/$\textrm{cm}^2$ about 13 K.

• 센서학회지
• /
• 제4권3호
• /
• pp.37-42
• /
• 1995

고주파 마그네트론 스펏터링법으로 MgO 기판위에 제조된 PLT((PbLa)$TiO_{3}$) 박막의 제조변수에 따른 특성을 조사하였다. PbO 과잉인 타겟을 사용하였으며 기판온도, 분위기압, $Ar/O_{2}$, 및 고주파 전력밀도가 각각 $640^{\circ}C$, 10 mTorr, 10/1, 및 $1.7\;W/cm^{2}$ 일 때 가장 좋은 특성을 나타내었다. 이러한 조건에서 제조된 PLT 막은 증착율이 $62.5\;{\AA}/min$, Pb/Ti가 1/2, 비유전율이 200이였으며 좋은 c축 배양성과 결정성을 나타내었다.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.819-826
• /
• 2002

본 논문은 $Ba_{0.5}$Sr$_{0.5}$TiO$_3$(BST) 박막을 이용한 대역 통과 여파기를 설계, 제작한 것으로 마이크로스트립 과 코플래너 웨이브가이드(CPW), CBCPW 전송 선로 구조에서 각 구조의 여파기 특성을 비교하였다. 제작된 여파기는 전압 0V 인가시 각각 6.4 GHz, 6.14 GHz, 6.04 GHz의 중심 주파수와 6 dB, 4.41 dB, 5.41 dB의 삽입 손실이 측정되었으며, 40V 인가시 중심 주파수 6.61 GHz, 6.31 GHz, 6.21 GHz와 삽입 손실 7.33 dB, 5.83 dB, 6.83 dB로 나타났다. 본 논문에서 제작된 각각의 대역 통과 야파기는 가변 범위가 약 3 % - 8 %이며, 무선랜 대역에 응용할 수 있도록 설계 및 제작되었다.다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권1호
• /
• pp.13-16
• /
• 2005

High temperature superconductor, $\YBa_2Cu_3O_{7-x}$ (YBCO) and ferroelectric, $\Ba_{0.1}Sr_{0.9}TiO_{3}$ (BST) multilayer thin films were deposited using on MgO(100) substrates pulsed laser deposition. The thin films exhibited only (001) peaks of YBCO and 1357 The HTS thin films demonstrated excellent zero resistance temperature of 92.5 K. We designed and fabricated HTS ferroelectric phase shifter using high frequency system simulator and standard photolithography method, respectively The HTS phase shifter shows a low insertion loss (2.97 dB) and large phase change ($\162^{circ}$) with 40 V do bias at 10 GHz. The HTS phase shifter shows 54 of figure of merit. These results can be applicable to phased anay antenna system for satellite communication services.