• 마이크로전자및패키징학회지
• /
• 제5권1호
• /
• pp.31-38
• /
• 1998

저온소결기판용 Glass-ceramics를 제조하기 위해 LiO2-MgO-MgF2-SiO2계 조성에 서 B2O3첨가가 결정화 특성 및 물성에 미치는 영향을 고찰하였다. 145$0^{\circ}C$에서용융하여 제조 한 모유리의 핵형성 온도와 결정화 온도를 결정하기 위해 TMA와 DTA분석을 실시하였다. 결정화시킨 유리의 결정상과 미세구조를 관찰하기 위하여 XRD와 SEM관찰을 실시하였다. Water swelling을 통해 Glass-ceramics powder를 제조하였으며 제조한 powder의 평균입자 크기는 8.32$\mu$m였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.39-43
• /
• 1997

Effects of B$_2$O$_3$ addition in the Li$_2$O-MgO-MgF$_2$-SiO$_2$g1ass system were investigated in order to make glass-ceramics for low temperature firing substrate. Base glass was made by melting at 145$0^{\circ}C$ . This glass was analyzed by THA and DTA to settle nucleation and crystallization temperature. After crystallization. crystal phase and microstructure were absorvated by XRD and SEM. Glass powders were made by water swelling method. Average particle size was 5.44${\mu}{\textrm}{m}$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.590-593
• /
• 1999

$Y_2SiO_5$:Ce was considered as blue phosphor for field emission display because it had an excellent resistance against brightness saturation. But unfortunately It hadn't a sufficient brightness to be applied to FED. In this experiment It-$In_2O_3$, MgO and $SiO_2$ were coated onto $Y_2SiO_5$:Ce phosphor in order to improve the cathodoluminance(CL properties. The coating structures were identified to be the crystalline phases of $In_2O_3$ and MgO respectively. They had fine particle-like shape and were distributed on the surface of $Y_2SiO_5$:Ce phosphor. It was found that the CL efficiency of $Y_2SiO_5$:Ce phosphors were decreased after coatings with In20:j and MgO in voltage range from 500 V to 5 kV. But the brightness of $Y_2SiO_5$:Ce phosphor was increased after coating of 5 0 2 . And also the aging test showed that $In_2O_3$ coating improved the life time of $Y_2SiO_5$:Ce phosphor.

• 한국세라믹학회지
• /
• 제29권2호
• /
• pp.127-135
• /
• 1992

It has been reported that natural petalite showed a low negative thermal coefficient and wide coefficient and wide coexisting region with liquid phase in Li2O-Al2O3-SiO2 system. Therefore, we investigated variation of microstructure and thermal and mechanical properties when the amount of SiO2 content in petalite compound and MgO addition to it compound were changed. As SiO2 content exceeded 80 wt%, crystal phases of $\beta$-cristobalite and $\beta$-spondumene solid solution were formed. Generally, the densification and bending strength were increased by the addition of MgO, but the positive thermal coefficient was found in the case of MgO 10 wt% addition because of second phase and glassy phase.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.504-508
• /
• 2018

Diopside is a ceramic material with excellent physical and chemical properties. However, when it is applied as an LED packaging material, heat dissipation of the LED element is not sufficient due to its relatively lower thermal conductivity, which may cause degradation of the LED function. In this study, glass-ceramics based on a $ZrO_2-CaO-MgO-SiO_2$ system, in which diopside is the main crystal phase, were prepared by heat-treating the glass, which was composed of zircon ($ZrO_2-SiO_2$) powders and diopside ($CaO-MgO-2SiO_2$) powders. The possibility of using the glass-ceramics as a packaging material for LEDs was then investigated by analyzing the density, shrinkage, thermal conductivity, and phases generated according to the amount of zircon powder added. The density and shrinkage of specimens decreased slightly and then increased again with the amount of $ZrO_2-SiO_2$ added within a range of 0~0.38 mol. Even though the crystal phase of zircon does not appear in the $ZrO_2-CaO-MgO-SiO_2$ system, the glass containing 0.38 mol zircon powder showed the highest thermal conductivity, 1.85 W/mK, among the specimens fabricated in this study: this value was about 23% higher than that of pure diopside. It was found that the thermal conductivity of the glass-ceramics based on a $ZrO_2-CaO-MgO-SiO_2$ system was closely related to the density, but not to the phase type. Zirconia ($ZrO_2$), a component oxide of zircon, plays an important role in increasing the density of the specimen. Furthermore the thermal conductivity of glass-ceramics based on a $ZrO_2-CaO-MgO-SiO_2$ system showed a nearly linear relationship with thermal diffusivity.

• 자원리싸이클링
• /
• 제20권3호
• /
• pp.55-61
• /
• 2011

금속급 실리콘(MG-Si)을 태양전지용 실리콘(SOG-Si)으로 정제하기 위한 경제적인 프로세스를 구축하기 위하여 1823 K에서 CaO-$SiO_2$ 계 슬래그에 의한 붕소의 제거에 대하여 조사하였다. 본 연구에서 CaO-$SiO_2$와 $CaCO_3-SiO_2$ 슬래그의 염기도(%CaO/$%SiO_2$) 증가에 따라 B의 제거율은 각각 63%와 73%까지 증가하였다. 그러나 Ar 가스에 의한 슬래그와 실리콘의 교반 시간의 영향은 나타나지 않았다. 그리고 CaO-$SiO_2$ 계 슬래그에 $Na_2CO_3$를 첨가하였으나 그 영향은 크지 않았다. $CaCO_3-SiO_2$ 슬래그(염기도=1.2)에 의해 3회 처리한 결과 B의 농도는 1.03 ppm까지 감소하였다.

• 농업과학연구
• /
• 제2권1호
• /
• pp.61-100
• /
• 1975

수도재배(水稻栽培)에 있어 작중토(作中土)의 유효규산함량(有效珪酸含量), ppm과 유기물함량(有機物含量)% 비(比) $SiO_2$/O.M. 근거(根據)한 N 적량(適量) 추정식(推定式) $Nkg/10a=(4.2+0.096\;SiO_2/O.M.).F$에서 N시비량(施肥量)을 추정(推定) 시용(施用)할 때의 적정(滴定) 가리(加里) 시용량(施用量) 추정식(推定式) $K_2Okg/10a=(K_O/\sqrt{Ca+Mg}-Ks/\sqrt{Ca+Mg})\sqrt{Ca+Mg}{\cdot}47{\cdot}BD$ 단 (但) $K_O/\sqrt{Ca+Mg}=0.03158+0.0007658\;SiO_2/O.M.$ $K_S/\sqrt{Ca+Mg}=Kme/100g/\sqrt{(Ca+Mg)}me/100g$의 타당성(妥當性) 여부(如否)를 판단(判斷)하기 위하여 3수준(水準)의 규회석처리(珪灰石處理)를 주구(主區)로하여 작토중(作土中)의 $SiO_2$/O.M. 비(比)를 증대(增大) 시키고 각주구별(各主區別)로 적정가리시용량(適正加里施用量) 추정식(推定式)에서 추정(推定)한 $K_2O$ 시용량(施用量)과 이에30%를 증비(增肥)하는구(區) 및 적정가리시용추정치(適正加里施用推定値)와는 관계(關係)없이 $K_2O\;8kg/10a$를 시용(施用)하는 3개수준(個水準)의 $K_2O$ 처리구(處理區)를 설정(設定)하여 수도품종(水稻品種) Akibare를 재배(栽培)하는 포장시험(圃場試驗)을 수행(遂行)하고 토양(土壤), 식물체분석(植物體分析) 및 수도(水稻)의 생육(生育)과 수량(收量) 및 수량구성요소(收量構成要素)들을 조사(調査)한 성적(成績)들을 종합검토(綜合檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 작토중(作土中) 유효규산함량(有效珪酸含量) ppm과 유기물함량(有機物含量)%비(比), $SiO_2$/O.M.에 근거(根據)한 수도(水稻)에 대(對)한 N적량추정식(適量推定式)에서 추정(推定)한 N시용량(施用量)은 수도품종(水稻品種) Akibare의 생육(生育) 및 수량면(收量面)에서 볼 때 과량(過量)이었으며 토양(土壤) 및 식물체(植物體) 분석치(分析値)들에서 검토(檢討)한 결과(結果) $SiO_2$/O.M. 비조절(比調節)의 기본원리(基本原理)는 합당(合當)하나 그 식(式)의 상수(常數) 또는 F값은 변동(變動)되여야 한다고 판단(判斷)되였다. 2. 작토중(作土中)의 K활성도(活性度) 치환성(置換性) 염기 me/100 g비(比) $K/\sqrt{Ca+Mg}$를 조절(調節)하기 위한 $K_2O$ 시비량(施肥量) 추정식(推定式)에서 추정(推定)한 $K_2O$ 시용량(施用量)은 수도품종(水稻品種) Akibare의 생육(生育) 및 수량면(收量面)에서 과량(過量)이였으며 토양(土壤) 및 식물체(植物體) 분석치(分析値)들에서 검토(檢討)한 결과(結果) 조절기준(調節基準)되는 $K_O/\sqrt{Ca+Mg}$의 설정식(設定式) 즉(卽) $K_O/\sqrt{Ca+Mg}=0.03158+0.0007658\;SiO_2/O.M.$의 원리(原理)는 합리적(合理的)이나 기상수(其常數)의 변동(變動)이 필요(必要)하며 $K_S/\sqrt{Ca+Mg}$에 있어서도 토양(土壤)의 K공급능(供給能)을 고려(考慮)할수 있는 새로운 조절기준(調節基準)이 설정(設定)되어야 한다고 판단(判斷)되였다. 3. 수도(水滔)에 대한 $K_2O$ 시용량(施用量) 추정식중(推定式中)의 $K_S/\sqrt{Ca+Mg}$ 조절(調節) 기준(基準)은 K 공급능(供給能)을 대표(代表)할수 있는 작토중(作土中)의 치환성(置換性) Kme/100g에 근거(根據)해서 마음과 같이 설정(設定)함이 보다 합리적(合理的)임을 수도품종(水稻品種) Akibare의 천상수량 $K_2O$ 흡수량면(吸收量面)에서 밝힐수 있었다. 즉 $K_S/\sqrt{Ca+Mg}=0.037+0.78Kme/100g$.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.870-874
• /
• 2002

$Mg_2$$SiO_4$: Dy, Tb pellets were made by using a sintering process, including pressing and heat treatment. In the present study, the optimum parameters of the sintering for the $Mg_2$$SiO_4$: Dy, Tb pellets obtained such as the pressing pressure, the sintering temperature and the sintering time were in terms of thermoluminescence. Experimental results showed that the main peak of the glow curve for $Mg_2$$SiO_4$: Dy, Tb thermoluminescence dosimeter was clearly correlated with the energy of the UV and with the grain size. The intensity of the TL glow curve increased and its main peak position shifted to lower temperature with increasing UV irradiation time.

• 한국결정성장학회지
• /
• 제25권3호
• /
• pp.121-126
• /
• 2015

A novel $Ce^{3+}$ doped $Lu_3MgAl_3SiO_{12}$ phosphor ($Lu_{2.94}Ce_{0.06}MgAl_3SiO_{12}$) was successfully synthesized by a conventional solid-state reaction at $1450^{\circ}C$ for 5 h. The crystal structure of the synthesized phosphor powder was characterized by X-ray diffraction and Rietveld refinement. The prepared phosphor powder showed a broad peak at 550 nm, and the temperature dependence on photoluminescence properties of the prepared $Lu_{2.94}Ce_{0.06}MgAl_3SiO_{12}$ phosphor was investigated from 300 to 525 K. The activation energy for thermal quenching was determined by Arrhenius fitting. The experimental results clearly indicate that prepared $Lu_{2.94}Ce_{0.06}MgAl_3SiO_{12}$ phosphor has great potential for a down-conversion yellow phosphor in white light-emitting diodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.575-578
• /
• 2004

The charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor surface was modified in order to improve discharging characteristic of green cell in an ac-plasma display panel (ac-PDP). The Zinc-silicate ($Zn_2SiO_4:Mn^{2+}$) green-emitting phosphor was coated with magnesium oxide(MgO), which is viable to have positive charge on the surface. After fabricating the green cell with MgO-coated $Zn_2SiO_4:Mn^{2+}$, the electrical and optical properties in the cell were examined. It was found that the dynamic voltage margin could be increased while the address time was reduced. It may be ascribed to the change of charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor by MgO coating, which makes it possible to stable wall-charge accumulation. When $Zn_2SiO_4:Mn^{2+}$ phosphor was coated with 1.3wt%-MgO, the address time was reduced 1.2 ${\mu}s$ and the address voltage lowered 25 V without any misfiring problem, compared to those of typical $Zn_2SiO_4:Mn^{2+}$ phosphor layer. The luminescence intensity of green cell using MgO-coated phosphor layer was also improved by 10%.