• Economic and Environmental Geology
• /
• v.24 no.3
• /
• pp.233-244
• /
• 1991

A biotite that substantially altered to chlorite and vermiculite in hornblende gneiss from Cheonyang, Korea, has been investigated with electron microprobe analysis. The data show the general variational trends of Ti and K-leaching with increased weathering. However, the chloritization is characterized by Si- conservative reaction and relatively dramatic increase of Al-for-(Fe+Mg) octahedral substitution, whereas the vermiculitization is characterized by total Mg-conservative and Ca-enriching exchange reaction. In the initiating stage the vermiculitization proceeded in a continuous decrease of the Al-for-Si tetrahedral substitution and an increase of the Al-for-(Fe+Mg) octahedral substitution, supporting the currently accepted weathering process. But it differs in the late stage, in which AI(IV) and Fe increase significantly. Recalculations of the structural formular for vermiculite on the basis of several assumptions indicate that the oxidation of Fe is necessary for vermiculite to form the reasonable strutural formular. The relative timing of the oxidation of Fe probably occurs in the late stage, supported by the substantial increase of the Al-for-Si tetrahedral substitution.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.774-780
• /
• 1998

For the stabilization of the spinel structured $LiMn_2O_4$, a fraction of manganese was substituted with various metals such as Mg, Fe, V, W, Cr, Mo with Mn that had a similar ionic radii ($LiM_xMn_{2-x}O_4(0.05{\leq}x{\leq}0.02)$). The $LiM_xMn_{2-x}O_4$ showed a substantial improvement as lower capacity loss than that of the spinel structured $LiMn_2O_4$ when it was used as a cathode material. And with the partial substitution, the chemical diffusion coefficient for $LiMg_{0.05}Mn_{1.9}O_4$ and $LiCr_{0.1}Mn_{1.9}O_4$ was increased by and order of magnitude compared to that of the $LiMn_2O_4$ with spinel structure. The results showed that significant improvement can be made on the electrochemical characteristics as the structure of the $LiMn_2O_4$ electrode material was stabilized by the partial substitution.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1621-1623
• /
• 1996

The dielectric and polarizable properties of 0.85Pb$Mg_{1/3}Nb_{2/3}$)$O_3$-$0.125PbTiO_3$-$0.25BaTiO_3$ Ceramics have been investigated as a addition of the amount of $La_{2}O_{3}$($0{\leq}x{\geq}0.05$). The Temperature-dependant electrostictive characteristics of 0.85PMN-0.125PT-0.25BT relaxor ferroelectic system were improved by enhencing the extent of the diffuse phase transition(DPT). This was achieved using PMN-PT-BTceramics by the partial substitution of La at the Pb site. The curie temperature and the maximum dielectic permittivity decreased by substituting $La_{2}O_{3}$ and the electic field-related hysteresis phenomena decreased with increasing $La_{2}O_{3}$ substitution amount. It is showed decreasing in induced strain for electric field with increasing $La_{2}O_{3}$ substitution.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.119-122
• /
• 2002

The calculated and measured dielectric constant of (1-x)(Al$\sub$1/2/Ta$\sub$1/2/)O$_2$-x(Mg$\sub$1/3/Ta$\sub$2/3/)O$_2$(O$\leq$x$\leq$1.0) solid solutions were investigated by variations of ionic polarizability and crystal structure. (Al$\sub$1/2/Ta$\sub$1/2/)O$_2$ and (Mg$\sub$1/3/Ta$\sub$2/3/)O$_2$were orthorhombic and tetragonal trirutile structure, respectively. When (Al$\sub$1/2/Ta$\sub$1/2/)O$_2$ was substituted by (Mg$\sub$1/3/Ta$\sub$2/3/)O$_2$, the phase transformed to tetragonal structure over 60 mole%. Because the ionic radius of (Mg$\sub$1/3/Ta$\sub$2/3/)O$_2$was slightly bigger than one of (A1$\sub$1/2/Ta$\sub$1/2)O$_2$, the cell parameters increased with an increase of (Mg$\sub$1/3/Ta$\sub$2/3/)O$_2$ substitution. The measured dielectric constant increased with an increase of (Mg$\sub$1/3/Ta$\sub$2/3/)O$_2$ substitution and coincided with dielectric mixing rule and the calculated dielectric constant with the molecular additivity rule. There were some differences between the measured and the calculated dielectric constant. The reason of the lowered dielectric constant comparing with the calculated one was compressed stress due to the electronic structure of tantalum.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.279-285
• /
• 2012

The co-precipitation technique has been applied to synthesize Biphasic Calcium Phosphate (BCP), Mg-BCP and Si-BCP. X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy were used to characterize the structure of synthesized BCP, Mg-BCP and Si-BCP powders. The results have shown that BCP and substitution of magnesium and silicon in the calcium deficient apatites revealed the formation of biphasic mixtures of Hydroxyapatite (HAp)/${\beta}$-Tricalcium phosphate (${\beta}$-TCP) ratios after heating at $1000^{\circ}C$. Ionic substituted BCP is able to develop a new apatite phase on the surface in contact with physiological fluids faster than BCP does. An MTT assay indicated that BCP, Mg-BCP, and Si-BCP powders had no cytotoxic effects on MG-63 cells, and that they have good biocompatibility.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.1
• /
• pp.1-14
• /
• 2021

The Unsang gold deposit has been one of the three largest deposits (Daeyudong, Kwangyang) in Korea. The geology of this deposit consists of series of host rocks including Precambrian metasedimentary rock and Jurassic Porphyritic granite. The deposit consists of Au-bearing quartz veins which filled fractures along fault zones in Precambrian metasedimentary rock and Jurassic Porphyritic granite, which suggests that it is an orogenic-type deposit. Quartz veins are classified as 1) galena-quartz vein type, 2) pyrrhotite-quartz vein type, 3) pyrite-quartz vein type, 4) pegmatic quartz vein type, 5) muscovite-quartz vein type and 6) simple quartz vein type based on mineral assembles. The studied quartz vein is pyrite-quartz vein type which occurs as sericitization, chloritization and silicification. The white mica from stylolitic seams of laminated quartz vein occurs as fine or medium aggregate associated with white quartz, pyrite, chlorite, rutile, monazite, apatite, K-feldspar, zircon and calcite. The structural formular of white mica from laminated quartz vein is (K0.98-0.86Na0.02-0.00Ca0.01-0.00Ba0.01-0.00 Sr0.00)1.00-0.88(Al1.70-1.57Mg0.22-0.09Fe0.23-0.10Mn0.00Ti0.04-0.02Cr0.01-0.00V0.00Ni0.00)2.06-1.95 (Si3.38-3.17Al0.83-0.62)4.00O10(OH2.00-1.91F0.09-0.00)2.00. It indicated that white mica of laminated quartz vein has less K, Na and Ca, and more Si than theoretical dioctahedral micas. Compositional variations in white mica from laminated quartz vein are caused by phengitic or Tschermark substitution [(Al3+)VI+(Al3+)IV <-> (Fe2+ or Mg2+)VI+(Si4+)IV] and direct (Fe3+)VI <-> (Al3+)VI substitution. The structural formular of chlorite from laminated quartz vein is((Mg1.11-0.80Fe3.69-3.14Mn0.01-0.00Zn0.01-0.00K0.07-0.01Na0.01-0.00Ca0.04-0.01Al1.66-1.09)5.75-5.69 (Si3.49-2.96Al1.04-0.51)4.00O10 (OH)8. It indicated that chlorite of laminated quartz vein has more Si than theoretical chlorite. Compositional variations in chlorite from laminated quartz vein are caused by phengitic or Tschermark substitution (Al3+,VI+Al3+,IV <-> (Fe2+ or Mg2+)VI+(Si4+)IV) and octahedral Fe2+ <-> Mg2+ (Mn2+) substitution. Therefore, laminated quartz vein and alteration minerals of the Unsan Au deposit was formed during ductile shear stage of orogeny.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.300-301
• /
• 2007

$Mg_4(Nb_{2-x}V_x)O_9$ (MNV) ceramics have been prepared by a hydrothermal method. Low-temperature sintering of $Mg_4(Nb_{2-x}V_x)O_9$ (MNV) by V substitution for Nb was discussed in this study. A $Q{\cdot}f_0$ value of 103,297 GHz with a ${\varepsilon}_r$ of 12.56 and a ${\tau}_f$ of $-10.53\;ppm/^{\circ}C$ was obtained when x=0.0625 after sintering at $1100^{\circ}C$ for 5 h.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.10
• /
• pp.1308-1318
• /
• 2010

The purpose of this study was to evaluate the effect of replacing soybean meal with treated castor meal with (CMT) or without lime (CMNT) on the nutrient intake, performance, carcass characteristics, and yield of commercial cuts of beef cattle from a feedlot. Thirty male, castrated, crossbreed zebu cattle were used in the study, with an average initial weight of $360{\pm}30.27\;kg$. Five animals were used as a control group and were slaughtered at the beginning of the experiment; the remaining animals (n = 25) were distributed in random blocks (repetitions), with body weight as the criterion for block assignment. The animals were fed a diet containing 65% corn silage and 35% of concentrate on dry matter (DM) basis. Five diets consisted of four levels of soybean meal (SM) substituted with CMT (0, 33, 67 and 100%) on a DM basis and a diet with 100% of SM replaced with CMNT. At the end of the experiment, all animals were slaughtered, and their gastrointestinal tracts were emptied to determine their empty body weights (EBW). No significant effects were observed (p>0.05) for the substitution of soybean meal with CMT on intake of dietary nutrients, the average daily body weight gain (ADG) or EBW gain (EBWG). In spite of greater (p<0.05) ricin intake for the diet containing CMNT (3.06 mg/kg BW) compared to the CMT diet (0.10 mg/kg BW/d), there were no effects (p>0.05) on intake of dietary nutrients, ADG or EBWG. The average intake of DM and the ADG were 10,664.63 and 1,353.04 g/d, respectively. Regarding carcass characteristics, only carcass yield in relation to body weight was linearly reduced (p<0.05) upon substitution of SM by CMT. There was no effect (p>0.05) of the substitution of SM by CMT or CMNT on the yield of carcass basic cuts. CMT prices that are higher than 85% of the SM price do not economically justify the use of CMT. For CMT prices between 20 and 80% of the SM price, the optimal level was 67% substitution, while for prices below 15% of the SM price, the optimal level was 100% substitution with CMT. It can be concluded that treated castor meal with 6% lime can totally replace soybean meal in beef cattle diets.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.62-67
• /
• 2007

The effects of the heat-treatment temperature on the carbon (C) substitution amount, full width at half maximum (FWHM) value, critical temperature ($T_c$), critical current density ($J_c$) have been investigated for 10 wt % malic acid ($C_4H_6O_5$)-doped $MgB_2/Fe$ wires. All the samples were fabricated by the in-situ powder-in-tube (PIT) method and heat-treated within a temperature range of $650^{\circ}C$ to $1000^{\circ}C$. As the heat-treatment temperature increased, it seemed that the lattice distortion was increased by a more active C substitution into the boron sites from the malic acid addition. These increased electron scattering defects seemed to enhance the $J_c-H$ properties in spite of an improvement in the crystallinity, such as a decrease of the FWHM value and an increase of the $T_c$. Compared to the un-doped wire heat-treated at $650^{\circ}C$ for 30 min, the $J_c$ was enhanced by the C doping in a high-field regime. The wire heat-treated at $900^{\circ}C$ resulted in a higher magnetic $J_c$ of approximately $10^4\;A/cm^2$ at 5 K and 8 T.

• International Journal of Human Ecology
• /
• v.4 no.1
• /
• pp.25-34
• /
• 2003

High dietary phytate is a known factor in reducing the bioavailability of minerals such as zinc and calcium which are already chronically low in the Korean diet. This study was conducted to develop methods for reducing dietary phytate through the addition of phytate and/or the substitution of high phytate foods with low phytate foods. Ten units of phytase per 100g of uncooked brown rice were added to brown rice gruel resulted in a 16.2% phytate reduction after a 3-hour incubation period; an 18.2% reduction was produced after a 6-hour incubation period. The addition of ten units of phytase per 100g of soybean curd residue at 45$^{\circ}C$, followed by refrigeration for 3 hours, resulted in a 19.1% phytate reduction. The addition of 20 units of phytase under the same conditions reduced phytate content by 24.6%. In this study, two typical Korean meals consisting of legumes and unrefined cereals were prepared as high phytate meals; these were then compared to low phytate meals that had been prepared by treating the foods with phytase and substituting unrefined with refined cereals (i.e., brown rice with white rice, whole wheat bread with white bread). The phytate content of the two high phytate meals was 1878.2mg and 1811.8mg. After the addition of phytase and the food substitution, the phytate content of the low phytate meals was reduced to 788.9mg and 606.0mg. The phytate to zinc molar ratio of high phytate diets was 22.4 and 21.3 and 9.4 and 7.9 for the low phytate meals. These results indicate that the nutritional status of Koreans in terms zinc and other minerals can be improved by phytate reduction. This can be accomplished through the change of milling process for some cereals and/or the enzyme treatment of some high phytate food items.