• The Journal of Korean Obstetrics and Gynecology
• /
• v.29 no.2
• /
• pp.83-98
• /
• 2016

Objectives: This Study was designed to investigate the effect of Oxygen chamber to recover muscle fatigue. Methods: Twenty Subjects were divided into Oxygen Chamber Group (n=10) and Rest group (n=10). Subjects visited hospital two times, blood tests were performed 3 times for each visit. 1st blood test was performed in 4 hours hunger state. 2nd blood test was performed within 5 minutes after the 6 minutes bike exercise. 3rd blood test was performed after the 40 minutes Oxygen treatment or 40 minutes rest in bed. Blood test items were Lactate, Glucose, Lactate Dehydrogenase, Creatine Kinase, Free Fatty Acid. 2nd visit was applied 1st visit process, But Oxygen Chamber group was crossed over to Rest Group, Rest Group was crossed over to Oxygen Chamber group. The Blood test result was analyzed with paired T-test using SPSS for Windows version 21. Results: The reduction of Lactate in Oxygen Chamber Group (6.86±2.07 mmol/ℓ) was higher than Rest group (6.57±2.33 mmol/ℓ), but it was not statically significant (p=0.68). The reduction of Glucose in Oxygen Chamber Group (6.85±12.14 mg/dl) was lower than Rest group (7.60±9.83 mg/dl), but it was not statically significant (p=0.83). The reduction of Lactate Dehydrogenase in Oxygen Chamber Group (16.10±14.91 mmol/ℓ) was lower than Rest group (19.75±12.46 mg/dl), but it was not statically significant (p=0.41). The reduction of Creatine Kinase in Oxygen Chamber Group (13.40±5.69 U/ℓ) was lower than Rest group (15.25±8.01 U/ℓ), but it was not statically significant (p=0.41). The reduction of Free Fatty Acid in Oxygen Chamber Group (285.50±174.13 uEq/ℓ) was higher than Rest group (196.15±131.58 uEq/ℓ), but it was not statically significant (p=0.07). Conclusions: This study showed Oxygen chamber therapy could be effective to recover muscle fatigue.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.238-243
• /
• 2001

Mass reduction and physicochemical properties of the produced compost were investigated during composting domestic food wastes without additive. A small composter used in this study had the height of 15 cm from the center of bottom half circle (diameter 24 cm) up to under the lid, the side length of 50 cm and the horizontal lid angle of $50^{\circ}$ and was operated at the heating unit temperature of $85^{\circ}$. It was mixed by the rotating arm for two minutes in every half hour while supplied with air flow at 3 L/min for 10 minutes in every half hour. This condition was found in a preliminary experiment as optimal for keeping the water content of composting material in the optimal range without adding any bulking materials. The domestic food wastes were added into the composter at the rate of 1 kg/day without additives during composting. The results were as follows; during the composting process, water content maintained in the range of $51.0{\sim}53.5%$. Hemicellulose and lignin contents did not show any tendency, but cellulose content decreased. During the composting process, $NH_3-N$ and $NO_2-N$ were not detected due to nitrification. The contents of inorganic compounds did not increase during the composting process. They were in the range of $1.32{\sim}1.71%\;P_2O_5$, $1.29{\sim}1.48%\;CaO$, $0.41{\sim}0.49%\;MgO$, and $0.38{\sim}0.74%\;K_2O$. For 20 days, weight reduction rate was 67.5% in wet basis, and decomposition rate was 48% in dry basis. Concentration of heavy metals (Cu, Cr, Cd, Pb, Zn, Hg, As) was less than the limiting value of the compost. Maturity of the produced compost was 3 grade through reaching maximum temperature of $46{\sim}48^{\circ}C$.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.1-9
• /
• 1995

This study was carried to investigate the biodegradability of phenol in the wastewater with the two sludge blanket-packed bed reactor in series. Each reactor had a dimension of 0.09 m i.d. and 1.5 m height and consisted of two regions. The lower region was a sludge blanket of 0.5 m height and the upper region was a packed-bed of 1 m height. The packed bed region was charged with ceramic raschig rings of 10 mm i.d., 15 mm o.d. and 20 mm length. The reactors were operated at 35$\circ$C and the hydraulic retention time(HRT) was maintained 24 hours. The synthetic wastewater composed of glucose and phenol as major components was fed into the reactor in a continuous mode with incereasing phenol concentration. In addition, the nutrient trace metals($Na^+, Mg^{2+}, Ca^{2+}, PO_4^{3-}, NH_4^+, Co^{2+}, Fe^{2+}$ etc.) were added for growing anaerobes. The phenol concentration of the effluent, the overall gas production, the composition of product gas, the efficiency of COD reduction and the duration of acclimation period were measured to determine the performance of the anaerobic wastewater treatment system as the phenol concentration of the influent was increased from 600 to 2400 mg//l. Successfully stable biodegradation of phenol could be achieved with the anaerobic treatment system from 600 to 1, 800 mg/l of the influent phenol concentration. The upper level of influent phenol loading was high enough to meet most of the practical requirement. The duration of acclimation increased with the phenol loading. At steady state of the influent phenol concentration of 1800 mg/l, the treatment performance indicated the phenol reduction efficiency of 99%, the COD reduction efficiency of 99% and the gas production rate of 37 l/day. At the influent phenol concentration of 2400 mg/l, however, the operation of the treatment system was noted unstable. While the concentration of methane in biogas decreased with increasing the influent phenol loading, the carbon dioxide was increased. However, the concentration of hydrogen was varied negligibly. The concentration of methane was high enough to be used as a fuel. As a result, it is suggested that anaerobic phenol wastewater treament was economical in the sense of energy recovery and wastewater treatment.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.29-45
• /
• 2007

Biogeochemical characteristics involving redox processes in groundwater from a riverine alluvial aquifer was investigated using multi-level monitoring wells (up to 30m in depth). Anaerobic conditions were predominant and high Fe ($14{\sim}37mg/L$) and Mn ($1{\sim}4mg/L$) concentrations were observed at 10 to 20 m in depth. Below 20 m depth, dissolved sulfide was detected. Presumably, these high Fe and Mn concentrations were derived from the reduction of Fe- and Mn-oxides because dissolved oxygen and nitrate were nearly absent and Fe and Mn contents were considerable in the sediments. The depth range of high Mn concentration is wider than that of high Fe concentration. Dissolved organics may be derived from the upper layers. Sulfate reduction is more active than Fe and Mn reduction below 20 m in depth. Disparity of calculated redox potential from the various redox couples indicates that redox states are in disequilibrium condition in groundwater. Carbonate minerals such as siderite and rhodochrosite may control the dissolved concentrations of Fe(II) and Mn(II), and iron sulfide minerals control for Fe(II) where sulfide is detected because these minerals are near saturation from the calculation of solubility equilibria.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.154-160
• /
• 2002

This study was carried out to investigate the efficacy of electrolyzed oxidizing(EO) water, electrolyzed oxidizing water with 0.5% citron juice and 0.1% aluminium potassium sulfate (APS) solution as the storing liquids to maintain quality and extend shelf life of peeled taro. Water content of peeled taro increased from 80.55% to 82.12∼84.24% after 25 days storage due to moisture absorption. However, there were no significant difference between treatments. In case of color value of peeled taro, L value was slowly decreased and a, b value was generally increased. Texture of peeled taro decreased from initial 4,520$\pm$75 g to 4,160$\pm$80 g after 25 days storage in EO water with 0.5% citron juice, which is the least reduction value in all treatments. Treatment of EO water with 0.5％ citron juice maintained 6.99 mg%(57%) of total vitamin C after 25 days storage which showed highest total vitamin C content between treatments. In most treatments, total sugar was decreased in fast rate for 15 days storage and slowly decreased after 15 days storage. Free sugar content was not changed significantly during storage. In case of sucrose content which is the major portion of free sugar, reduction continued until the midst of storage. and after that it increased to 1.5∼2 times of initial contents. However, there were no differences between treatments and storage days in contents of fructose, glucose and maltose. Major amino acids in peeled taro were aspartic acid and glutamic acid with 1,084.8 and 691.8 mg/100g respectively. At 25 days of storage, aspartic acid content in treatment of EO water was increased about 13.9%. Treatment of EO water with 0.5% citron juice was the most effective in respect to the reduction ratio of total amount of essential amino acids.

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2003.10a
• /
• pp.105-126
• /
• 2003

In Korea most of annual rainfall is concentrated in several episodic heavy rains during the season of summer monsoon and typhoon. Because of uneven rainfall distribution many dams have been constructed in order to secure water supply in dry seasons. The Han River system has the most dams among Korean rivers, and the river is a series of dams now. Reservoirs need different strategy of water quality control from river water. Autochthonous organic matter and phosphorus should be the major target to be controlled in lakes. In this Paper some problems are discussed that makes efforts of water quality improvement ineffective in lakes of Korea, even after the substantial investment to wastewater treatment facilities.1) Phosphorus is the key factor controlling eutrophication of lakes and the reduction ofphosphors should be the major target of water treatment. However, water quality management strategy in Korea is still stream-oriented, and focused on BOD removal from sewage. Phosphorus removal efficiency remains as low as 10-30%, because biological treatment is adopted for both secondary treatment and advanced treatment. The standard for TP concentration of the sewage treatment plant effluent is 6 mgP/l in most of regions, and 2 mg/l in enforced region near metropolitan water intake point. TP in the effluents of sewage treatment plants are usually 1-2 mg/1, and most of plants meet the effluent regulation without a further phosphorus removal process. The generous TP standard for effluents discourages further efforts to improve phosphorus removal efficiency of sewage treatment. Considering that TP standard for the effluent is below 0.1 mg/l in some countries, it should be amended to below 0.1 mg/l in Korea, especially in the watershed of large lakes.2) Urban runoff and combined sewer overflow are not treated, even though their total loading into lakes can be comparable to municipal sewage discharges on dry days. Chemical coagulation and rapid settling might be the solution to urban runoff in regard of intermittent operation on only rainy days.3) Aggregated precipitation in Korea that is concentrated on several episodic heavyrains per year causes a large amount of nonpoint source pollution loading into lakes. It makes the treatment of nonpoint source discharge by methods of other countries of even rain pattern, such as retention pond or artificial wetland, impractical in Korea.4) The application rate of fertilizers in Korea is ten times as high as the average ofOECD countries. The total manure discharge from animal farming is thought to be over the capacity of soil treatment in Korea. Even though large portion of manure is composted for organic fertilizer, a lot of nutrients and organic matter emanates from organic compost. The reduction of application rate and discharge rate of phosphorus from agricultural fields should be encouraged by incentives and regulations.5) There is a lot of vegetable fields with high slopes in the upstream region of the HanRiver. Soil erosion is severe due to high slopes, and fertilizer is discharged in the form of adsorbed phosphorus on clay surface. The reduction of soil erosion in the upland area should be the major preventive policy for eutrophication. Uplands of high slope must be recovered to forest, and eroded gullies should be reformed into grass-buffered natural streams which are wider and resistant to bank erosion.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.6
• /
• pp.411-416
• /
• 2007

This study was performed to investigate the reduction of toxicity and improvement of anticancer activities from R. sachalinensis by ultra high pressure extracts process. The cytotoxicity on human kidney cell (HEK293) and human lung cell (HEL299) was showed below 20.4% and 21.6% as compare to normal extracts in adding 1.0 $mg/m{\ell}$ concentration. This showed that toxic materials through ultra high pressure processing is broken or degraded. Because bond such as hydrogen bond, electrostatic bond, Van der waals bond, the hydrophobic bond, can be broken by high pressure. The anticancer activity was also increased in over 7% by high pressure processing in A549, AGS, MCF-7 and Hep3B cells. The result showed that extraction by high pressure have low cytotoxicity and high anticancer activity. So, the high pressure extraction technology can play an important role in eruption of new material with high biological activity.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.508-516
• /
• 2023

The consumption of enoki mushrooms has been associated with cases of listeriosis produced by Listeria monocytogenes, highlighting the significance of sanitizing food-contact surface, such as the velcro used in welding processing of enoki mushrooms, to ensure microbial safety. We investigated the inhibitory activity of nine chemical disinfectants at regular concentrations against L. monocytogenes isolated from a mushroom farm environment. The bacterial suspension was prepared in phosphate buffered saline and mushroom extract broth and inoculated onto the velcro surface. After inoculation, most disinfectants reduced the initial 8 log CFU/coupon concentration by less than 2 log CFU/coupon during a 5-min treatment. Slightly acidic hypochlorous water showed a reduction of approximately 4 log CFU/coupon when tested for more than 30 min at the maximum allowable concentration of 200 mg/L. Sodium hypochlorite solution showed a reduction of approximately 5 log CFU/coupon when used at 100 mg/L for 60 min. Peracetic acid, at the maximum allowable concentration of 300 mg/L, showed the most effective reduction of 5 log CFU/coupon or more when the surface was treated with 37.5 mg/L for 30 min. These results indicate that peracetic acid can be used as the disinfectant strategy to control cross-contamination of L. monocytogenes on the velcro surface of plastic wrappers used in the welding processing of enoki mushrooms.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.106-111
• /
• 1999

The effect of the MG on the electrochemical charge-discharge properties of $CaNi_5$ hydrogen storage alloys was investigated under Ar and $H_2$ atmosphere. $CaNi_5$ alloy was partially decomposed to CaO and Ni phase during the MG process. The decomposition of $CaNi_5$ alloy was enhanced by the MG process which leads to crash and reformation of oxide layer on the alloy surface. As the MG process time increased, initial discharge capacity of the electrode was reduced, but the decay rate of the capacity compared to $CaNi_5$ alloys was slower. It may be described that the degradation of $MG-CaNi_5$ electrode was caused by the reduction of the reversible hydrogen reaction sites and increasing polarization resistance of hydrogen adsorption resulted from phase decomposition and disorder during the MG process, and/or by hydroxide formation during the electrochemical charge-discharge cycles.

• Korean Journal of Materials Research
• /
• v.25 no.6
• /
• pp.269-273
• /
• 2015

The effect of adding Ca on the microstructural and mechanical properties of as-cast Mg-11Li-3Zn-1Sn(wt%) alloys were investigated. Mg-11Li-3Zn-1Sn-0.4Mn with different Ca additions (0.4, 0.8, 1.2 wt%) were cast under an $SF_6$ and $Co_2$ atmosphere at $720^{\circ}C$. The cast billets were homogenized at $400^{\circ}C$ for 12h and extruded at $200^{\circ}C$. The microstructural and mechanical properties were analyzed by OM, XRD, SEM, and tensile tests. The addition of Ca to the Mg-11Li-3Zn-1Sn-0.4Mn alloy resulted in the formation of $Ca_2Mg_6Zn_3$, MgSnCa intermetallic compound. By increasing Ca addition, the volume fraction and size of $Ca_2Mg_6Zn_3$ with needle shape were increased. This $Ca_2Mg_6Zn_3$ intermetallic compound was elongated to the extrusion direction and refined to fine particles due to severe deformation during hot extrusion. The elongation of the 0.8 wt% Ca containing alloy improved remarkably without reduction strength due to the formation of fine grain and $Ca_2Mg_6Zn_3$ intermetallic compounds by Ca addition. It is probable that fine and homogeneous $Ca_2Mg_6Zn_3$ intermetallic compounds played a significant role in the increase of mechanical properties.