• Title/Summary/Keyword: Mg 입자

Search Result 715, Processing Time 0.026 seconds

디스포저블 작업복 소재의 쾌적성 및 기능성을 위한 황토날염에 관한 연구

  • 신정숙;박순자;정명희
    • Proceedings of the Costume Culture Conference
    • /
    • 2003.04a
    • /
    • pp.103-104
    • /
    • 2003
  • 황토는 주로 가는 모래로 되어 있어서 다량의 석영, 장석, 운모 등 다양한 광물 입자로 구성되어 있고 탄산칼슘(CaCO₃), 철(Fe), 마그네슘(Mg), 나트륨(Na), 칼리(K) 등의 성분으로 되어 있다. 황토는 다양한 약성원소를 포함하고 있다. 그것은 특히 제독 능력을 높여줄 뿐 아니라 항균 작용도 하며, 지혈제인 동시에 응고제로 매우 뛰어난 치료효과를 보여준다. 황토의 효능은 숯의 효능과 다를 바가 없으며, 어느 것이 더 우월한 지에 대한 비교를 할 수 없을 정도로 그 약성에 있어서 유사하다. (중략)

  • PDF

Microstructures and Mechanical Properties of SiCp/ Al-Si-Mg Alloy Composites Fabricated by Rheo-compocasting and Hot Extrusion (Rheo-compocasting 및 열간압출에 의하여 제조한 Al-Si-Mg / SiC 입자강화 복합재료의 조직 및 기계적 특성)

  • Lee, Hag-Ju;Hong, Chun-Pyo
    • Journal of Korea Foundry Society
    • /
    • v.12 no.4
    • /
    • pp.335-345
    • /
    • 1992
  • Aluminum alloy matrix composites reinforced with various amounts of SiC particles have been produced by rheo-compocasting followed by hot extrusion. A relatively uniform distribution of SiC particles in the composites was obtained. The amounts of pore and SiC particles cluster were relatively small in the composites. Particle free zones were observed in the hot extruded composites when the amount of SiC particles was less than 20 vol%. However, the width of particle free zone decreases with the increase of SiC particle content. Eutectic Si phase play an important role for improving bonding between SiC particle and matrix. Tensile and yield strength increased with the increase of SiC particle content. the strenthening effect of SiC particle addition was effective even at relatively high temperature of 573 K.

  • PDF

Formation of $\textrm{Al}_2\textrm{O}_3$/SiC/matal Composite by melt oxidation of an AlZnMg-alloy (AlZnMa 합금의 용융산화에 의한 $\textrm{Al}_2\textrm{O}_3$/SIC/금속 복합재료의 형성)

  • Kim, Sang-Ho;Gang, Jeong-Yun;Kim, Il-Su
    • Korean Journal of Materials Research
    • /
    • v.6 no.10
    • /
    • pp.1043.1-1048
    • /
    • 1996
  • 알루미나 매트릭스 복합재료를 AIZnMg(7075)-합금의 직접적인 용융산화를 통하여 제조하였다. 충전재료는 17$\mu\textrm{m}$ 크기의 모서리가 둥근 연마재용 SiC 입자를 사용하였다. 산화촉진재 SiO2를 사용한 경우와 사용하지 않은 경우를 비교하였다. 매트릭스 형성 매카니즘과 반응거동을 온도와 SiO2사용량을 중심으로 연구하였으며, 얻어진 AI2O3/SiC/금속 복합재료의 미세구조를 관찰하였다.

  • PDF

Synthesis of Layered Double Hydroxides by co-precipitation and characterization of their anion-exchange capacity (공침법을 이용한 층상이중수화물의 합성과 이의 음이온 교환능 평가)

  • 강미라;임형미;안병길;남중희;정상진;김광진
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2003.03a
    • /
    • pp.248-248
    • /
    • 2003
  • 층상이중수화물(Layered Double Hydroxides, LDH)은 층 사이에 무기물 음이온이 있는 2차원 충상구조물로서 이들 층 사이의 공간에 이동 가능한 수화된 음이온의 존재로 전하균형을 이룬다. 층 사이의 음이온은 교환이 가능하며, 나머지의 공간은 물분자로 채워져 있다. 이러한 특성을 응용하여 LDH는 촉매, 음이온 교환제, 흡착제, 담체로 사용가능하며, 특히 음이온 교환능이 있는 소재로 고분자에 적용되고 있으며, 층간에 염료를 삽입한 복합체의 제조 둥에 관한 연구가 활발히 이루어지고 있다. 이의 적용에서 LDH의 입도는 결정적인 한계 요인으로 작용하기도 한다. 본 실험에서는 Mg-Al-NO$_3$ 층상이중수산화물(Mg-Al-NO$_3$-LDH)을 공침전법으로 합성하고, 양이온의 농도와 공침시 pH 및 교반조건의 변화가 생성된 LDH의 결정상, 형상, 입도, 및 양이온교환능에 미치는 영향을 알아보았다. 특히 초음파 분산법을 적용하는 경우 생성되는 LDH 입자크기의 미세화에 효과적인 것을 확인 할 수 있었다.

  • PDF

Fluidity and Mechanical Properties of Open Cell AZ31 Mg Alloy Foam

  • Yue, Xue-Zheng;Hur, Bo-Young
    • Journal of Korea Foundry Society
    • /
    • v.32 no.3
    • /
    • pp.150-156
    • /
    • 2012
  • 발포금속은 초경량 재료로서 폐기공과 개기공의 두 가지 형태의 구조를 지니고 있으며 폐기공은 내충격성, 흡음성, 단열성의 기능을 지니고 있고, 개기공은 필터, 생체지지대, 촉매재, 열방출재 등으로 사용되고 있다. 개기공발포재는 삼차원 구조모양으로 프리커서를 이용한 압력정밀주조나 기공입자용출법으로 제조하고 있으나 기공의 크기나 셀의 형상, 두께 등을 조절하기에 어려움이 있다. 이를 해결하기 위하여 환경친화적인 펄라이트를 사용하여 목적하는 크기의 그래뉼을 제조한 후, 용융마그네슘합금을 감압주조법으로 주조하여 그래뉼의 크기로 기공율을 조절하고, 주형의 온도와 압력에 따른 유동의 길이를 측정하였다. 그래뉼 직경이 2.3 $mm{\O}$ 일때에 주형의 온도 $300^{\circ}C$ 이상, 압력이 5000 Pa 이상에서 유동길이 6.5 cm 이상을 얻었다.

Effect of Particle Size of Rice on Physicochemical and Nutritional Properties of Soybean Porridge (쌀 입자 크기에 따른 콩죽의 이화학적 및 영양학적 특성)

  • You, Bo-Ram;Kim, Mee-Ree
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.20 no.1
    • /
    • pp.187-192
    • /
    • 2010
  • The study investigated the effect of rice particle size on the physicochemical properties of soybean porridge prepared at different pH. Redness, yellowness and viscosity of soybean porridge increased according to the rice particle size. Protein content of soybean porridge was increased 2-fold, compared to that of rice porridges. Total amino acid content of soybean porridge was 1,821.2 mg/100 g and that of rice was 1,719.1 mg/100 g. Lysine and threonine contents of limited amino acid of soybean porridge were increased. Half grain rice soybean porridge exhibited the highest sensory scores. The results indicated that half grain size soybean porridge is preferred, both physicochemically and nutritionally.

A Study on the research of nontoxic Mg/Al series metalhydrates complex with double layer structure for PVC resins (무독성 Mg/Al계 이중층상구조 금속수화물 적용 PVC용 열안정제 개발에 관한 연구)

  • Ahn, Tae-Kwang;Kim, Hee-Soo
    • Proceedings of the KAIS Fall Conference
    • /
    • 2008.11a
    • /
    • pp.93-96
    • /
    • 2008
  • 500나노 입자 및 기본 물성이 우수한 이중층상구조금속수화물(LDH)를 합성하고 PVC 수지에 적용하여 고온, 저온열안정성 및 가공특성으로 인장강도, 신율, 체적저항 등이 우수한 시제품을 합성한 후 개발한 이중층상구조금속수화물(LDH) 시제품을 사용하여 무독성안정제(금속석검계), 내외부활제류, 가공조제, 산화방지제 등 기타 첨가제 등을 사용하여 PVC수지에 적용하여 수지배합에 따른 시험편을 제작하여 배합비별로 고온, 및 저온열안정성, 체적고유저항, 가공성(인장강도, 신율 등), 내후성, 초기 착색성 등 물성, 기계적 가공특성 및 성능이 우수한 할로겐수지용 무독성배합을 개발한다. 최종적으로 개발한 이중층상구조금속수화물(LDH)을 사용하여 제조하여 PVC 수지의 열안정성 및 기계적 가공특성이 우수한 중금속계대체용 무독성복합열안정제를 개발하였다.

  • PDF

Seasonal variation in size distributions for ionic components in the atmospheric aerosol (대기중 입자상물질에 있어서 이온성분의 입도별 계절변동)

  • 김희강;조기철;이주희;최민규;마창진;강충민;여현구
    • Journal of Environmental Health Sciences
    • /
    • v.22 no.4
    • /
    • pp.55-61
    • /
    • 1996
  • Measurements of the seasonal variations of concentration and size distribution of TSP, $SO_4^{2-}, NO_3^-, Cl^-, NH_4^+, Na^+, K^+, Ca^{2+}$ and $Mg^{2+}$ were made by Andersen air sampler from May 1995 to April 1996 in Seoul. The size distribution of these ions was divided into four patterns. 1) Distribution was concentrated on fine particles over a year such as $NO_3^-$ component, 2) Distribution was predominated in coarse particles fraction over a year such as $Mg^{2+}$ and $Ca^{2+}$ components, 3) Distribution was differerent from various seasons such as $NH_4^+, SO_4^{2-}, Cl^-$ and $K^+$ components, 4) Distribution was bi-modal such as $Na^+$.

  • PDF

Density Dependent Growth and Survival Rates of Atrina pectinata in Duekryang Bay, Korea (득량만 키조개, Atrina pectinata의 양성밀도에 따른 성장과 생존율)

  • Kim, Dae-Hong;Yoon, Ho-Seop;An, Yun-Keun;Lee, Sa-Dong;Choi, Sang-Duk
    • The Korean Journal of Malacology
    • /
    • v.24 no.2
    • /
    • pp.137-142
    • /
    • 2008
  • Growth and survival rates dependent on the density of a pen sell, Atrina pectinata were measured from Duekryang bay in Korea. Annual water temperature and salinity of the study area were ranged from 14.5 to $28.0^{\circ}C$ and from 27.98 to 31.89 psu, respectively. The pH, DO, COD, DIN, Chl-a and SPM in the study area ranged from 7.78-8.35 mg/L, 7.07-7.90 mg/L, 1.20-1.70 mg/L, 2.88-6.02 mg/L, 0.20-0.79 mg/L and 10.8-21.4 mg/L. The IL, COD and AVS in sediments ranged from 4.0-4.6%, 7.28-10.76 mg/L and 0.03-0.05 mg/L respectively. The daily growth rate of shell height and total weight were 0.27%, 0.33%(5 indiv./$m^2$), 0.26, 0.29%(10 indiv./$m^2$) and 0.21, 0.20%(35 indiv./$m^2$). The survival rate also decreased along the density gradient; highest at the lowest density of 5 indiv./$m^2$ and lowest at the maximum density of 35 indiv./$m^2$.

  • PDF

Study on the Chemical Characteristics of $PM_{10}$ at Background Area in Korean Peninsula (한반도 서해안 배경지역 미세입자의 화학적 특성 연구)

  • Bang So-Young;Baek Kwang-Wook;Chung Jin-Do;Nam Jae-Cheol
    • Journal of Environmental Health Sciences
    • /
    • v.30 no.5 s.81
    • /
    • pp.455-468
    • /
    • 2004
  • The purpose of this paper is to understand the time series and origin of a chemical component and to compare the difference during yellow sand episodes for analysis $PM_{10}$ chemical components in the region of west in Korean Peninsula, 1999-2001. An annual mean concentration of $PM_{10}$ is $29.1\;{\mu}g/m^3$. A monthly mean and standard deviation of $PM_{10}$ concentration are very high in spring but there is no remarkably seasonal variation. Also, water soluble ionic component of $PM_{10}$ be influenced by double more total anion than total cation, be included $NO_{3}^-\;and\;SO_{4}^{2-}$ for the source of acidity and $NH_{4}^+$ to neutralize. Tracer metals of $PM_{10}$ slowly increases caused by emitted for soil and ocean (Fe, Al, Ca, Mg, Na) and Zn, Pb, Cu, Mn for anthropogenic source. According to method of enrichment factor (E.F) and statistics, assuming that the origin of metal component in $PM_{10}$ most of element in the Earth's crust e.g. Mg, Ca, Fe originates soil and Cu, Zn, Cd, Pb derives from anthropogenic sources. The ionic component for $Na^{+}\;Cl^-,\;Mg^{2+}\;and\;Ca^{2+}$ and Mg, Al, Ca, Fe originated by soil component largely increase during yellow sand period and then tracer metal component as Pb, Cd, Zn decrease. According to factor analysis, the first group is ionic component ($Na^+,\;Mg^{2+},\;Ca^{2+}$) and metal component (Na, Fe, Mn and Ni) be influenced by soil. The second group, Mg, Cr also be influenced by soil particle.