• 한국ITS학회 논문지
• /
• 제17권6호
• /
• pp.40-53
• /
• 2018

교통카드자료에서 철도이용승객이동은 단말기ID 순서로 나타난다. 최초 단말기ID는 진입역사 Tag-In노선, 최종 단말기ID는 진출역사 Tag-Out노선, 중간 단말기ID는 환승역사 Tag노선정보를 각각 포함한다. 과거 3개 공사기관(서울교통공사, 인천교통공사, 한국철도공사)만 참여하던 수도권도시철도는 최초 및 최종 단말기ID로 표현된 OD만 존재했다. 최근 (주)신분당선, (주)우이-신설경전철 등 민자기관진입으로 진입환승노선 단말기ID와 진출환승노선 단말기ID가 포함된 Chain OD가 보편화되었다. Chain OD를 통한 정확한 경로구축과정은 수도권철도운송기관의 수입금배분의 기초자료로서 매우 중요한 위치를 차지하고 있다. 따라서 지하철네트워크에서 경로탐색은 Chain OD에 대한 최적경로탐색의 문제로 전환되어 새로운 해법이 요구된다. 본 연구는 철도네트워크에서 단말기 Chain OD의 최초 단말기ID와 최종 단말기ID 간의 최적경로탐색기법을 제안하는 것이다. 이때 Chain OD에 민자노선환승 TagIn/Out를 반영하여 최적경로를 탐색하는 방안을 강구한다. 이를 위해 링크표지로 구축된 3가지 경로탐색기법( 1) 노드 - 링크, 2) 링크 -링크, 3) 링크 -노드 )을 순차적으로 적용하는 방안을 제안한다. 가산성경로비용을 토대로 제안된 기법이 최적조건을 만족함을 증명한다.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.257-264
• /
• 2016

In this paper, new electric railway feeding system which has active transformer is modeled for evaluating the steady state analysis using PSCAD/EMTDC. Equivalent models including power supply, feeder, train and transformers are proposed for simplifying the model of the feeding system in high speed electric railway. In case study, simulation results applied to proposed model are compared with the conventional and new systems through the catenary voltage, three-phase voltage of PCC (Point of Common Coupling) and the efficiency of regenerative braking energy.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.98-103
• /
• 2010

There should be a need for measures to build up environmentally friendly transport system with new town for residence being built near metropolitan area. In order to promote the development of station influence area, convenience for public transport users and LRT(Light Rail Transit) construction, request for the speed improvement of urban transit is on the rise for easy access to the metropolitan area. This paper delves into the efficient operation of high speed train suitable for passenger demand estimates, and seeks to ensure integrated transportation system with subway Line 9 following the construction of Gimpo urban railway.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.40-46
• /
• 2012

This paper presents contactless power supply systems using the Valtchev model in transportation systems. The major drawback of contactless systems is that the efficiency is lower than that of contact systems. The coupling coefficient of the contactless transformer is the most influential parameter on the system efficiency. Here, a new computer model for the contactless transfer system developed in the Korea Railroad Research Institute is presented. Also, simulations of the old model and the new model are compared with the prototype measurement to assure the model validity.

• International Journal of Railway
• /
• 제8권1호
• /
• pp.21-29
• /
• 2015

This study focuses on the performance enhancement of the levitation and guidance control system in urban and medium-to high-speed magnetic levitation trains. A levitation control system, which is currently being tested in Yeongjongdo, is a single controller that is neither designed nor produced on the basis of redundancy. Hence, vehicular stability and reliability should be improved for the situation in which levitation failure occurs because of a breakdown in a controller during vehicle operation. In addition, the control system should be developed to control electromagnetic levitation considering changes in normal force according to changes in the driving force of the propulsion system.

• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.67-71
• /
• 2008

본 연구는 그동안 지자체 및 각종 연구기관에서 조사된 교통 현황 및 각종 통계자료와 도시철도 현황을 재분석하고 교통과 인구의 관계, 서울의 지역별 산업분포와 종사자와의 관계, 승용차 등록대수 현황과 증가추이를 통해서 중장기적인 변화와 문제점을 예측하기 위해 연구되었으며, 서울도시철도의 발전적 건설방향과 안정적인 도시철도 건설을 위한 재원확보라는 양 측면에서 대안을 제시하였다.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.331-337
• /
• 2015

The power flow analysis of electrified railway is required complicated calculation, because of variable load. Train runs trough rail supplied by electric power therefore, the load value in electrified railway system fluctuates along time. The power flow algorithm in electrified railway system is different from general power system, and the power flow simulation is peformed by the particular simulation software. Powerail is simulation software for analysis of traction power supply system developed by KRRI, in 2008. This consists of load forecasting module, including TPS and time scheduling, and power flow module. This software was verified by measured current under normal feeding condition, however, has not been verified by voltage on the condition of extended feeding. This paper presents the verification of PowerRail based on voltage drop under extended feeding condition. This is performed by comparing simulation result with field test. Field test and simulation is done in commercial railway line.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1885-1891
• /
• 2010

Recently metropolitan local governments is actively introducing urban railway's expand and light rail transit as a means of new transport system. DC electricity feeder system operating in the domestic urban railway is typically a feedback circuit consisted of the contact wire and electric railway vehicle via rail. But stray current is to be defined as a current flowing on a structure that is not part of the intended electrical circuit with respect to a given structure. Stray current is generally results from the leakage of return currents from large DC traction systems that are grounded or have a bad earth-insulated return path. At the place where the current leaves the rail and metallic structures, electrolytic corrosion may take place. This paper presents comparison analysis of field test methods based on criteria of electrolytic corrosion protection of buried metallic structures adjacent to DC traction systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1668-1673
• /
• 2007

In light of the growing traffic congestion problem and congestion cost, the container transport by railway has to be increased. The freight transport by railway can have decided advantages over trucks in terms of energy efficiency, emissions and cost for certain freight movements, just as transportation in the metropolitan region can have great advantages over driving truck. But the freight transport by truck should gain significant mobility benefits from a freight railway system. Thus, the DMT(Dual Mode Trailer) transport system which is coupled railway transport advantages with load transport advantages has been developed and used in the european countries. The DMT transport will therefore serve the areas required by transport organizers. This paper describes the various DMT transport systems and its strength and weakness.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1193-1198
• /
• 2004

This paper describes the lightning protection system for railway signaling equipments installed at subway car depots in Seoul metropolitan Rapid Transit Cooperation. Several measures for improving lightning protection performance are adopted; newly organized grounding system for neutral line of power system, rolling method to minimize damages induced by direct lightning strike, new measures to reduce voltage differences between the signaling equipments and the ground, and improvement of grounding system. The proposed system has greatly reduced the grounding resistance and also the voltage difference between the signaling equipments and the ground, and has prevented the accident related with lightning surges since it was installed. The proposed approach can be viewed as a useful alternative of dealing with lightning protection for railway signaling equipments.