• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.272-272
• /
• 2011

무기물 나노입자를 포함하는 유기물/무기물 나노복합체는 차세대 전자 소자에 쉽게 적용이 가능하고 응용 잠재적 능력이 뛰어나기 때문에 차세대 비휘발성 메모리 소자에 응용하려는 연구가 세계적으로 활발히 진행되고 있다. 본 연구에서는 poly (methylmethacrylate) (PMMA) 절연성 고분자 박막 안에 CdTe와 CdTe-CdSe 코어-쉘 나노입자를 각각 분산시켜 이를 전하의 저장 매체로 사용하는 메모리 소자를 제작하였다. 제작된 각각의 소자에 대한 메모리 메카니즘과 PMMA 박막 안에 분포되어 있는 CdTe-CdSe 코어-쉘 나노입자에서 CdSe 쉘의 전기적 영향에 대하여 연구하였다. 소자에 필요한 용액을 제작하기 위해 서로 다른 용매에 녹아 있는 CdTe-CdSe 나노입자와 PMMA를 혼합하였다. Al 금속을 하부 전극으로 증착한 p-Si (100) 기판 위에 나노입자와 PMMA가 혼합된 용액을 스핀 코팅 방법을 사용하여 박막을 형성한 후, 남아있는 용매를 제거하기 위해 열처리를 하였다. 용매가 모두 제거된 박막위에 금속 마스크를 사용하여 상부 Al 전극을 열증착 방법으로 형성하였다. 나노입자가 포함된 고분자 박막의 메모리 특성을 비교하기 위하여 나노입자가 없는 PMMA층만으로 형성된 소자도 같은 방법으로 제작하였다. 세 가지 종류의 소자에 고주파 정전용량-전압 (C-V) 측정을 한 결과 나노입자가 분산된 PMMA 층으로 제작된 소자에서만 평탄 전압 이동이 관찰되었으며, 이것은 나노입자를 전하 포획 장소로 사용할 수 있다는 것을 확인하였다. 정전용량-시간 (C-t) 측정을 하여 나노입자가 포함된 PMMA 층으로 제작된 메모리 소자의 안정성을 관찰하였다. C-V와 C-t 측정 자료를 바탕으로 제작된 메모리 소자의 메모리 메카니즘과 CdTe-CdSe 코어-쉘 나노입자에서 CdSe 쉘의 역할을 설명하였다.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.547-552
• /
• 2009

Chitosan, a natural polymer, has been importantly considered as biomedical materials due to its good biocompatibility and various bio-active characteristes. Water soluble chitosan was then copolymerized EGDMA(ethylene glycol dimethacrylate; used as a cross-linking agent for the free-radical copolymerization), MMA (methylmethacrylate), MA (methacrylic acid) in the presence of AIBN (azobisisobutyronitrile) as a radical initiator. The water content and visible transmissibility, ultimate strength of copolymerized ophthalmic polymer were measured to be 24$\sim$59%, 88$\sim$89% and 0.1$\sim$2.4 Kgf, respectively. And also, we tested for antimicrobial activities against staphylococcus aureus, Pseudomonas aeruginosa. They showed that in case of antimicrobial activities, the values including chitosan were much higher than that of the polymers of no including chitosan, suggesting that the copolymer can be used as a novel ophthalmic material of high performance.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.749-754
• /
• 2009

HEMA (2-hydroxyethyl methacrylate) is a hydrophilic material which is broadly used for ophthalmologic purposes and especially in the manufacture of soft contact lenses. Also, the oxygen transmissibility (Dk/t) is a very important physical characteristic in the evaluation of a material’s adequacy to be used to produce contact lenses. This study used HEMA (2-hydroxyethyl methacrylate), MMA (methylmethacrylate), NVP (Nvinyl-pyrrolidone), the cross-linker EGDMA (ethylene glycol dimethacrylate) for copolymerization, and measured the oxygen transmissibility of the central and peripheral areas of the manufactured general and color contact lenses using the polarographic method. The measurement showed that the decreased amount of oxygen transmissibility of the central and peripheral areas of the contact lenses measured using the polarographic method range between 40.77% and 49.13%, and the oxygen transmissibility of the color contact lens showed a larger decrease due to the effects of the coloring materials.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.228-233
• /
• 2010

Recently, nanoparticles of gold and silver has been applied to various fields due to antimicrobial property. This study added Ag and Au nanoparticles in HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone) and MMA (methylmethacrylate) and copolymerized the solution by heating at $70^{\circ}C$ for 40 minutes, $80^{\circ}C$ for 40 minutes, and finally, $100^{\circ}C$ for 40 minutes. Using the polymer produced through the copolymerization process, and measured the physical characteristics which showed water content of 28.43% ~ 35.27%, refractive index of 1.429 ~ 1.440, visible transmittance of 79.2% ~ 86.5% and tensile strength of 0.125 kgf ~ 0.201 kgf. We judged that we made the copolymer with antimicrobial and physical properties which is suitable for conventional contact lens.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.28-33
• /
• 2007

We measured cloud points of Poly(methylmethacrylate) (PMMA) in various solvents using the high-pressure variable volume view cell apparatus. The solvents used for dissolving PMMA were chlorodifluoromethane (HCFC-22), dimethylether (DME), 1,1,1-trifluoroethane (HFC-143a), 1,1-difluoroethane (HFC-152a) and 1,1,1,2-tetrafluoroethane (HFC-134a), and the effect of $CO_2$ concentration on the phase behavior of $PMMA+HCFC-22+CO_2$ system and $PMMA+DME+CO_2$ system was observed. PMMA was dissolved well in HCFC-22 from about 340 K, 5MPa and in DME from about 300 K, 28MPa. However, PMMA was not dissolved at all up to 423.15 K, 160MPa in the other fluorine compound such as HFC-l43a, HFC-152a and HFC-134a. PMMA+HCFC-22, $PMMA+HCFC-22+CO_2$ and PMMA+DME systems exhibit the lower critical solution temperature (LCST) behavior, however, $PMMA+DME+CO_2$ system exhibits the upper critical solution temperature (UCST) behavior. In the $CO_2$ mixture, the cloud point pressure of PMMA was increased dramatically proportional to the amount of $CO_2$ added, and from this result, it was known that $CO_2$ could be used as an antisolvent for fabricating PMMA nano-particles. And the cloud point of PMMA could be controlled by changing the concentration of $CO_2$.

• Korean Membrane Journal
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2007

To prepare chemically stable asymmetric microporous membranes with a hydrophilic surface, which would be expected to have better antifouling properties, poly(vinylidene fluoride) (PVDF) blend membranes were prepared by the phase inversion process. PVDF mixture solutions in N-methylpyrrolidone (NMP) blended with several polar potential ionic polymers such as polyacrylonitrile (PAN), poly(methylmethacrylate) (PMMA) and poly(N-isopropylacrylamide) (NIPAM) were used for the formation of the PVDF blend membranes. They were then characterized with several analytical methods such as FESEM, FTIR, contact angle measurement, pore size distribution and permeability measurement. Regardless of different polar polymers blended, they all showed a finger-like structure with more hydrophilic surface than the pristine PVDF membrane. For all the PVDF blend membrane, due to the polar potential ionic polymers used, the flux of those was improved. Especially the PVDF blend membrane with NIPAM showed the highest flux among the membranes prepared. Also antifouling property of the PVDF membrane was improved by the use of the polar polymers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.202-207
• /
• 1992

The objective of this study is to develop analytical techniques of polymer impregnated concrete flexural members for its proper applications. crystalline methylmethacrylate(MMA) is chosen as a monomer of polymer impregnants, On the basis of members. fracture toughness, fracture energy , critical crack width, and tension softening relations near crack tip are formulated in terms of member depth, initial notch length and the flexural strength of normal concrete. The structural analysis rocedure and the finite element computer program developed in the study are applicable to evaluate elastic behavior, ultimate strength, and tension softening behavior of MMA type PIC structural members subject to various loading conditions. It is concluded that the developed structural analysis procedure and the finite element computer program are applicable to analysis and design of in-situ and precast PIC structural members.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.410-415
• /
• 2004

Molecular dynamics simulations of nanoimprint lithography in which a stamp with patterns is pressed onto amorphous poly-(methylmethacrylate) (PMMA) surface are performed to study the deformation of polymer. Force fields including bond, angle, torsion, inversion, van der Waals and electrostatic potential are used to describe the intermolecular and intramolecular force of PMMA molecules and stamp. Periodic boundary condition is used in horizontal direction and $Nos\acute{e}$-Hoover thermostat is used to control the system temperature. As the simulation results, the adhesion forces between stamp and polymer are calculated and the mechanism of deformation are investigated. The effects of the adhesion force and friction force on the polymer deformation are also studied to analyze the pattern transfer in nanoimprint lithography. The mechanism of polymer deformation is investigated by means of inspecting the indentation process, molecular configurational properties, and molecular configurational energies.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.518-522
• /
• 2003

We fabricated polymeric hollow spheres having macropores, which combine the advantageous properties of porous materials and hollow spheres. To fabricate such spheres, a polystyrene/methylmethacrylate solution was dispersed in water by vigorously stirring and then the suspension was quenched using liquid nitrogen. Water and methyl methacrylate present in the quenched suspension were readily sublimated by freeze-drying. Conclusively, the hollow-sphere structure and the macropores of its shell were created by the processes of liquid nitrogen-quenching and sublimation of methyl methacrylate domains within the shell, respectively.

• Textile Coloration and Finishing
• /
• v.5 no.1
• /
• pp.19-25
• /
• 1993

Plastic optical fibers(POFs) composed of poly(methylmethacrylate) (PMMA), polystyrene (PS), or polycarbonate(PC) as a core materials, and of fluorinated polymer or PMMA as a cladding were fabricated and their properties were investigated in this study. The attenuation loss of PMAA core POF was about 1,700 dB/Km at 660 nm, the loss of PS core POF was 1,800 dB/Km at 560 nm, and the loss of PC core POF was 2,200 dB/Km at 780 nm. These attenuation losses of POFs prepared ill this study were higher than those of commerically available POFs. Compared to PMMA and PS core POFs, PC core POF has excellent characteristics, including high thermal stability, high flexibility, and high impact strength.