• Bulletin of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.65-69
• /
• 1990

The nucleophilic substitution reactions of naphthalene-1,5-disulfonyl chloride and 4-fluorosulfonylbenzenesulfonyl chloride with p-substituted anilines and methyl substituted pyridines in methanol-acetonitrile mixtures and hydrolyses of those disulfonyl halides have been studied by means of conductometric and polarographic methods. A large difference in the selective parameter, ${\rho}_N$ between mono-sulfonyl chloride and disulfonyl halide can be taken as an evidence that the second $SO_2Cl$ grolup of naphthalene-1,5-disulfonyl chloride also takes part in the reaction in contrast to sulfonyl fluoride in 4-fluorosulfonylbenzenesulfonyl chloride, which only acts as a substituent in the nucleophilic substitution reaction.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.842-846
• /
• 2001

Solvolyses of N-methyl-N-phenylcarbamoyl chlorides in aqueous binary mixtures of acetone, ethanol, methanol and in water, D2O, and 50% D2O-CH3OD are investigated at 25.0 $^{\circ}C.$ The Grunwald-Winstein plots of first-ord er rate constants for N-methyl-N-phenylcarbamoyl chlorides with YCl (based on 2-adamantyl chloride) show a dispersion phenomenon. The ring parameter (I) has been shown to give considerable improvement when it is added as an hI term to the original Grunwald-Winstein and extended Grunwald-Winstein correlations for the solvolyses of N-methyl-N-phenylcarbamoyl chlorides. This study has shown that the magnitude of l, m and h values associated with a change of solvent composition is able to predict the dissociative SN2 transition state. The kinetic solvent isotope effects determined in deuterated water are consistent with the proposed mechanism of the general base catalyzed and/or a dissociative SN2 mechanism channel for N-methyl-N-phenylcarbamoyl chlorides solvolyses.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.4
• /
• pp.286-290
• /
• 1990

The surface enhanced Raman scatterings of Zn(Ⅱ) tetrakis (4-N-methyl pyridyl) porphyrins were studied in silver sol. Zn(Ⅱ) tetrakis (4-N-methyl pyridyl) porphyrin was found to be adsorbed on silver surface via flat-on geometry with some inhomogeneous distribution in the orientation of pyridyl groups. Both the selective enhancement of Raman modes depending on the mode character and the theoretical arguments of SERS are utilized to support the above conclusion. The surface induced substitution reaction of Mn(Ⅲ) tetrakis (4-N-methyl pyridyl) porphyrin chloride to Ag(Ⅱ) tetrakis (4-N-methyl pyridyl) porphyrin was detected via surface enhanced Raman spectrum.

• Bulletin of the Korean Chemical Society
• /
• v.3 no.3
• /
• pp.110-115
• /
• 1982

Thermochemistry and photochemistry of picolyl chlorides were studied. The thermal reaction of 2-picolyl chloride in benzene afforded intermolecular condensation product. In the case of 3-picolyl chloride, this type of the reaction did not occur, but polymers were obtained. A cyclic hexamer, suggested by a molecular model, was not formed because of the steric strain and low reactivity. The thermal reaction of 4-picolyl chloride gave a cyclic hexamer as well as a polymer. The cyclic hexamer, identified by NMR spectrum, showed ${\lambda}_{max}$ at 460 nm. The cyclic hexamer was cloven to the linear structure. Photolysis of 2-picolyl chloride at 253.7 nm gave a para-isomer followed by polymerization. When a methyl hydrogen of 2-methylpyridine is substituted by $CH_3O$, iso-PrO, and EtO group, the photoisomerization to the corresponding anilines or para-substituted pyridines did not occur within the range of the time used for 2-picolyl chloride. Thermolysis of picolyl chlorides in an acidic methanol solution did not afford any product.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.123-128
• /
• 2001

The Purpose of this study is to clarify the effect of the monomer ratio on properties of the polymer-modified mortars using methyl methacrylate-butyl acrylate latexes, and to obtain basic data necessary to develop appropriate latexes for cement modifiers. This paper deals with the effect of the monomer ratio on the typical properties of polymer-modified mortars with methyl methacrylate-butyl acrylate latexes. The polymer latex-modified mortars are prepared with 5, 10, IS and 20% of polymer cement ratio respectively, and properties of modified mortars such as water absorption, compressive and flexural strengths, chloride-ion penetration depth are tested. The test results indicate that the monomer ratio is very important factors to characterize the strength properties of polymer-modified mortars, but the water absorption and chloride-ion penetration depth are influenced by polymer-cement ratio rather than monomer ratios.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.157-157
• /
• 2000

The adsorption processes of methyl chloride on Si(100)-2$\times$1 have been studied by low energy electron diffraction (LEED), Auger electron spectroscopy (AES) and semiempirical PM3 calculations. The dissociative adsorption of the methyl chloride on Si(100) takes place without breaking of the silicon dimer with high efficiency. For adsorption at the room temperature, the existence of a precursor state is confirmed by the behavior of the sticking probability depending on the coverage and temperature. From AES measurements, the determined activation barrier of adsorption ($\Delta$ Hads) is -28.4 kj/mol. This results indicate that the dissociative process is nonactivated. The optimized precursor state of CH3Cl on the Si(100)-2$\times$1 surface was determined by PM3 calculations based on a cluster model.

• YAKHAK HOEJI
• /
• v.36 no.4
• /
• pp.341-344
• /
• 1992

A facile method for tolmetin, which is a potent antiinflammatory agent, is described. Friedel-Crafts reaction of 1-methylpyrrole with ethyl ${\alpha}-chloro-{\alpha}-(methylthio)acetate$ (1) gave ethyl ${\alpha}-methylthio$-1-methyl-2-pyrroleacetate (4), which was readily converted into ethyl 1-methyl-2-pyrroleacetate (5) by reductive desulfurization with zinc dust in acetic acid. Tolmetin was synthesized by Friedel-Crafts acylation of (5) with p-toluoyl chloride, followed by hydrolysis of the resultant ethyl 5-(p-toluoyl)-1-methylpyrrole-2-acetate (6).

• Archives of Pharmacal Research
• /
• v.27 no.1
• /
• pp.19-24
• /
• 2004

The facile synthesis of a series of 2-(4-hydroxyphenyl)benzofurans (4a-e) is described. The one-pot reaction of 4-substituted phenols with the chloride 1 in the presence of zinc chloride afforded 3-methylthio-2-(4-acetoxyphenyl)benzofurans (2a-e). The compounds 4a-e were obtained from the hydrolysis of 2a-e followed by the desulfurization of the resulting 3-methylthio-2-(4-hydroxyphenyl)benzofurans (3a-e). 5-Methyl-3-p-toluoyl-2 -[4-(3-diethylaminopropoxy)phenyl]benzofuran (7), a $\beta$-amyloid aggregation inhibitor, was synthesized by three steps starting from 4a.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.483-486
• /
• 2021

Catalytic ozonation of methyl ethyl ketone (MEK) has been examined over mesoporous MnO_x/Al₂O₃ (MA) catalysts developed by a solvent deficient method using two different manganese precursors including manganese chloride (C) and manganese sulfate (S) at room temperature. The maximum catalytic activities of MA with C (MEK removal efficiency and ozone decomposition of 98.4 and 93.7%, respectively) were higher than those of MA with S (MEK removal efficiency and ozone decomposition of 96 and 68%, respectively). Also the catalytic stability of MA with C was much higher than that of MA with S. The physico-chemical properties of catalysts are well correlated with the activity results, which confirmed that fine dispersion of MnO_x species with high ratios of Mn³⁺/Mn⁴⁺ and more acid sites are attributed to the higher catalyst stability for the MA-C catalyst.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.273-279
• /
• 1994

The stability of three oximes, Hl-6 [(4-carbamoyl-2'[(hydroxyimino)-methyl]- 1,1'-oxydimethylenedi-(pyridinium chloride)], Hl-CN [(4 cyano-2'-[(hydroxyimino)-methyl] -1,1'-oxydimethylene-di-(pyridinium chloride)], and 2-PAM [pralidoxime chloride] in aqueous solutions was evaluated by HPLC assay. The rate of degradation is dependent on the pH as well as the temperature at which the solution is stored. The optimum pH for the stability of these oximes was pH 2 to 3. The degradation rate constant for 2-PAM ($k\;at\;70^{\circ}C$, $2.07{\times}10^{-4}/hr;\;E_a\;value$, 27.2 kcal/mol) was smaller than those for bis-pyridiniumoximes, Hl-6 ($k\;at\;70^{\circ}C$, $3.38{\times}10^{-3}/hr$) and Hl-CN ($k\;at\;70^{\circ}C$, $8.66{\times}10^{-3}/hr;\;Ea\;value$, 20.7 kcal/mol). In mechanistic analyses, it was found that Hl-CN was decomposed through not only the hydrolysis of nitrile group but also the cleavage of methylene ether bridge, in contrast to Hl-6 which was degraded mainly through the cleavage of methylene ether bridge.