• 한국수소및신에너지학회논문집
• /
• 제25권1호
• /
• pp.79-86
• /
• 2014

In Dimethyl Ether (DME) indirect production processes, DME have a reforming process to separate Methanol. DME has a high cetane number and Methanol has a high octane number. Each fuel has a different combustion characteristics and reactivity. So, this paper was investigated on the combustion characterisitics of DME and Methanol. Basically, Methanol has a effect of retarding ignition. However, Within 10% of total carbon mole number in DME, Methanol slightly changed the onset timing of Low Temperature Reaction (LTR) with increasing thermal-ignition preparation range. It means that controlling combustion phasing of DME can be possible without eliminated LTR. In case of IMEP, the ranges.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.123-128
• /
• 2011

It has been stand high in estimation to converse from Carbon dioxide to Dimethyl Ether in new alternative fuel energy division in 21C, especially Using of DME in point of view of transportation fuel has been discussed of a new clean energy which is very lower of exhaust gas than gasoline and diesel energy. In this paper it is used ZSM-5 and I developed new catalyst by addition of cerium to control acidity. The new catalyst was proved high conversion rate, when it was conversed from methanol to DME, there wasn't any additional material except DME and water, and I overlooked reaction temperature, reaction time, amount of catalyst, amount of added cerium, effect of water content in methanol, reaction temperature by making change of reaction time. I have conclude that conversion rate to DME was increased as increased of catalyst amounts. The best catalyst condition of without additional product was treated poisoning from ZSM-5 to 5% cerium and new catalyst was not effected in purity of fuel methanol.

• 공업화학
• /
• 제17권2호
• /
• pp.125-131
• /
• 2006

디메틸에테르(이하 DME)는 환경에 친화적인 새로운 청정에너지이다. 또한 DME는 다양한 에너지원으로부터 제조 되어지며, 그 에너지원으로는 천연가스, 석탄, 바이오매스, 폐플라스틱 등이 있다. 이런 DME는 LPG와 매우 유사한 성질을 특징으로 가지고 있다. 이러한 결과로 DME는 LPG, 연료전지, 발전연료, 특히 디젤의 대체 연료로 고려되고 있으며, 2010년 대체 에너지로 기대되고 있다. DME 직접합성반응의 반응속도를 측정하기 위하여 서로 다른 조건인 온도 $220{\sim}280^{\circ}C$, 합성가스 비율 1.2~3.0에서 실험을 수행하였다. 모든 실험은 혼성촉매를 사용하여 수행하였으며, 혼성촉매는 메탄올 합성 촉매와 메탄올 탈수촉매가 포함되어 있다. 반응속도는 랭미어-힌쉘우드 타입의 반응 메커니즘을 따르며, 메탄올 합성반응, 메탄올 탈수반응, 수성가스 전환반응, 이 세 가지 반응의 메커니즘을 고려하였다. 각 반응의 반응속도는 촉매상의 표면반응과 수소와 메탄올, 그리고 물의 해리흡작으로 결정하였다.

• 한국수소및신에너지학회논문집
• /
• 제15권4호
• /
• pp.283-290
• /
• 2004

The single-step process for conversion of syngas to DME give higher conversion than the syngas-to-methanol process. This arises because of a synergy among the three simultaneous reaction, methanol synthesis, methanol dehydration and water gas shift reaction, in the process. we would find the optimal condition of the process which these advantages. The optimal condition of DME synthesis reaction over a commercial $Cu/Zn/Al_2O_3$ catalyst and Hybrid catalyst in a fixed bed reactor. The syngas-to-dimethyl ether conversion was examined on various reaction condition (Temperature 473~553K, $H_2/CO$ ratio 1~3, Pressure 30'50atm, GHSV 1000~4000).

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.83-87
• /
• 2005

The kinetics of the direct synthesis of DME was studied under different conditions over a temperature range of $220\~280^{\circ}C$, syngas ratio $1.2\~ 3.0$ All experiment were carried out over hybrid catalyst, composed to a methanol synthesis catalyst (Cu/ZnO/$Al_2O_3$) and a dehydration Catalyst ($\gamma$-Al_2O_3$) The observed reaction rate qualitatively follows a Langmiur-Hinshellwood type of reaction mechanism. Such a mechanism is considered with three reaction, methanol synthesis, methanol dehydration and water gas shift reaction. From a surface reaction with dissociative adsorption of hydrogen, methanol and water, individual reaction rate was determined

• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.345-349
• /
• 2006

SAPO-34 촉매상에서 DME(dimethyl ether) 또는 메탄올로부터 경질 올레핀(에틸렌, 프로필렌, 부텐)을 제조하는 반응을 수행하여, 각각의 올레핀들과 CO, $CO_2$와 같은 부 생성물의 수율을 반응온도와 시간의 흐름에 따라 비교해서 관찰하였다. DME 전환반응은 메탄올 전환반응과 비교하여 볼 때 촉매의 비활성화가 급격히 진행되었다. 물을 첨가할 경우, 올레핀의 수율을 증가와 함께 코크 생성에 의한 촉매의 비활성화가 감소하여 촉매의 수명이 길어짐을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.155-160
• /
• 2011

디메틸 에테르(DME)는 최근 청정 연료로서 주목을 받고 있다. 본 연구에서는 메탄올 탈수반응을 통한 디메틸 에테르(DME)의 제조에 대하여 조사하였다. 이때 촉매는 제올라이트 계열인 고체산 촉매를 이용하였다. 조촉매로서 세리아가 반응전환율뿐만 아니라 DME 생성 선택도도 증가시키는 것을 발견하였다. 실리카/알루미나의 조성비와 촉매 표면의 세리아의 무게함량을 변화시켜 최적의 촉매를 선정하였다. 5 wt%의 세리아가 첨가된 ZSM5-30의 DME에 대한 반응선택성이 가장 뛰어났으며, 이 촉매는 메탄올 내에 포함되어 있는 수분의 영향을 거의 받지 않았다. 마이크로 반응기에서 얻은 데이터를 가지고 반응 속도식을 구하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.196-208
• /
• 2018

The effect of channel-system of zeolite on methanol-to-DME reaction was studied. Results revealed that channels size and topology affect catalyst lifetime, type and location of coke precursors. FER and MFI showed the best resistance towards coke deposition, whilst fast deactivation was observed on MOR. Although the higher concentration and strength of acid sites, FER structure formed a lower coke amount, preferably located within the pores, while coke cluster deposited on the external surface of MOR. Analysis of acid sites distribution and strength was performed during deactivation-regeneration process. Coke location assessment was also supported by molecular simulations.

• 청정기술
• /
• 제15권4호
• /
• pp.287-294
• /
• 2009

DME (dimethyl ether, $CH_3OCH_3$) 직접합성 반응기로부터 생산되는 DME 혼합물(DME: 19~20 mol%)을 DME 흡수탑과 DME 정제탑 장치 2기를 사용하여 대체연료로 사용할 수 있는 순도로 분리하였다. DME 흡수탑에서는 메탄올을 세정용매로 사용하였고 운전압력 50 bar내에서 원료 중 DME를 탑 하부로 99% 이상 회수하는 것을 목적으로 하였으며, 이를 위해 실험실 규모의 실험장치를 통해 얻은 실험식을 사용하여 운전압력 50 bar내에서 DME를 99% 회수하기 위해 필요한 메탄올의 유량을 산출하였다. 그리고 95 wt% 이상의 DME 순도를 얻기 위해 DME 정제탑을 사용하였으며, 경질 생성물(이산화탄소, 질소 등)이 소량(5~10 mol%)이고, 중간생성물(DME)의 양(20~30 mol%)이 적지 않은 것을 감안하여 측면흐름(4단)의 액상 생성물로서 최대 98.2 wt% 순도의 DME를 얻었다.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.10-15
• /
• 2004

We developed a water-selective ceramic composite membrane for use as a dehydration membrane reactor for dimethylether (DME) synthesis from methanol. The membranes were modified on the porous stainless steel support by the sol-gel method accompanied by a suction process. The improved membrane modification process was effective in increasing the vapour permselectivity by removal of defects and pinholes. The optimized alumina/silica composite membrane exhibited a water permeance of 1.14${\times}$10$^{-7}$ mol/$m^2$.sec.Pa and a water/methanol selectivity of 8.4 at permeation temperature of 25$0^{\circ}C$. The catalytic reaction for DME synthesis from methanol using the membrane was performed at 23$0^{\circ}C$, and the reaction conversion was compared with that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor was much higher than that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor and the conventional fixed-bed reactor was 82.5 and 68.0%, respectively. This improvement of reaction efficiency can last if the water vapour produced in the reaction zone is removed continuously.