• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2133-2139
• /
• 2012

A new system using $TiO_2$ (nano-sized, band-gap 3.14 eV)-impregnated spherical ZnS (micro-sized, band-gap 2.73 eV) nano/micro-composites (Ti 0.001, 0.005, 0.01, and 0.05 mol %/ZnS) was developed to enhance the production of hydrogen from methanol/water splitting. The ZnS particles in a spherical morphology with a diameter of about 2-4 mm which can absorb around 455 nm were prepared by hydrothermal method. This material was used as a photocatalyst with loading by nano-sized $TiO_2$ (20-30 nm) for hydrogen production. The evolution of $H_2$ from methanol/water (1:1) photo splitting over the $TiO_2$/ZnS composite in the liquid system was enhanced, compared with that over pure $TiO_2$ and ZnS. In particular, 1.2 mmol of $H_2$ gas was produced after 12 h when 0.005 mol % $TiO_2$/ZnS nano/micro-composite was used. On the basis of cyclic voltammeter (CV) and UV-visible spectrums results, the high photoactivity was attributed to the larger band gap and the lower LUMO in the $TiO_2$/ZnS composite, due to the decreased recombination between the excited electrons and holes.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1047-1053
• /
• 2009

The future use of hydrogen as an energy source is expected to increase on account of its environmentally friendliness. In order to enhance the production of hydrogen, Pd ions (0.01, 0.05, 0.1, and 0.5 mol%) were incorporated $TiO_2$ (Pd-$TiO_2$) and used as a photocatalyst. The UV-visible absorbance decreased with increasing level of palladium incorporation without a wavelength shift. Although all the absorption plots showed excitation characteristics, there was an asymmetric tail observed towards a higher wavelength caused by scattering. However, the intensity of the photoluminescence (PL) curves of Pd-$TiO_2$ was smaller, with the smallest case being observed at 0.1 and 0.5 mol% Pd-$TiO_2$, which was attributedto recombination between the excited electrons and holes. Based on these optical characteristics, the evolution of $H_2$ from methanol/water (1:1) photo-splitting over Pd-$TiO_2$ in the liquid system was enhanced, compared with that over pure $TiO_2$. In particular, 2.4 mL of $H_2$ gas was produced after 8 h when 0.5 g of a 1.0 mol% Pd-$TiO_2$ catalyst was used. $H_2$ was stably evolved even after 28 h without catalytic deactivation, and the amount of $H_2$ produced reached 14.5 mL after 28 h. This is in contrast to the case of the Pd 0.1 mol% impregnated $TiO_2$ of $H_2$ evolution of 17.5 mL due to the more decreasedelectron-hole recombination.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2813-2817
• /
• 2014

A new magnetic semiconductor material was synthesized to enable separation after a liquid-type photocatalysis process. Core@shell-structured $CuFeS_2@TiO_2$ magnetic nanoparticles were prepared by a combination of solvothermal and wet-impregnation methods for photocatalysis applications. The materials obtained were characterized using X-ray diffraction, transmission electron microscopy, ultraviolet-visible, photoluminescence spectroscopy, Brunauer-Emmett-Teller surface area measurements, and cyclic voltammetry. This study confirmed that the light absorption of $CuFeS_2$ was shifted significantly to the visible wavelength compared to pure $TiO_2$. Moreover, the resulting hydrogen production from the photo-splitting methanol/water solution after 10 hours was more than 4 times on the core@shell structured $CuFeS_2@TiO_2$ nanocatalyst than on either pure $TiO_2$ or $CuFeS_2$.

• 청정기술
• /
• 제18권4호
• /
• pp.355-359
• /
• 2012

본 연구에서는 보다 효율적인 광 전기화학적 수소제조를 위하여 광촉매로써 산화텅스텐에 티타늄을 함침하여 $Ti/WO_3$ 나노입자를 제조하였다. 제조한 $Ti/WO_3$의 물리적 특성은 X-선 회절분석법(XRD), 주사전자현미경(SEM), 발광분광계(PL), 원자간력 현미경(AFM), 정전기 현미경(EFM)을 통해 확인하였다. 메탄올/물 (1/1) 광분해 수소제조 실험 결과, 순수 아나타제 티타니아나 산화텅스텐 광촉매보다 $Ti/WO_3$ 광촉매에서 촉매활성이 향상되었으며, 0.5 g의 0.10 mol % $Ti/WO_3$ 촉매를 사용한 경우 8시간 반응 시 3.02 mL의 수소가 발생되었다.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.513-517
• /
• 2013

본 연구는 광 촉매로써 널리 사용되어 온 perovskite 결정인 $SrTiO_3$ 골격에 형광능력이 우수한 Nb을 일부 삽입한 $Nb_xSrTi_{1-x}O_3$를 합성하였고, Nb와 Ti의 몰 비율에 따른 물 분해로부터 수소제조 성능을 비교하고자 하였다. 제조한 $SrTiO_3$ 및 $Nb_xSrTi_{1-x}O_3$ 분말에 대한 물성평가는 X-선 회절분석법(XRD), 에너지 분산형 X-선 분광계(EDS), 자외선/가시선 분광계(UV/Vis-spectrometer)를 통해 분석하였다. 메탄올:물(1:1) 광분해 수소제조 실험 결과, $SrTiO_3$ 광 촉매보다 Nb이 0.05 mol% 첨가된 $Nb_{0.05}SrTi_{0.95}O_3$ 광 촉매에서 촉매활성이 가장 뛰어났으며, 특히 염기성 용액에서 더 많은 양의 수소가 발생하였으며 8시간 반응 후 수소의 발생 누적 량은 4.9 mL였다.

• 청정기술
• /
• 제17권1호
• /
• pp.78-82
• /
• 2011

본 연구에서는 보다 효율적인 광 전기화학적 수소제조를 위하여 광촉매로써 티타니아 골격에 positive-type 반도체로써 B 이온, negative-type 반도체로써 P 이온을 삽입하여 고온 고압에서 용매열(solvothermal)법으로 P- 그리고 B-$TiO_2$ 나노 입자를 제조하였다. 제조한 P-$TiO_2$와 B-$TiO_2$의 물리적 특성은 X-ray 회절분석법, 투과전자현미경, 자외선-가시선 분광광도계, 발광분광계를 통해 확인하였다. 메탄올/물(1:1) 광분해 수소제조 실험 결과, 1.0 mol% B-$TiO_2$ 광촉매가 순수 anatase $TiO_2$ 광촉매 보다 활성이 향상되었으며, 0.5 g의 1.0 mol% B-$TiO_2$ 촉매를 사용한 경우 10시간 반응 시 0.42 mL의 수소가 발생되었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1137-1144
• /
• 2013

$TiO_2$ composites with seven different carbon materials (activated carbons, graphite, carbon fibers, single-walled carbon nanotubes, multi-walled carbon nanotubes, graphene oxides, and reduced graphene oxides) that are virgin or treated with nitric acid are prepared through an evaporation method. The photocatalytic activities of the as-prepared samples are evaluated in terms of $H_2$ production from aqueous methanol solution (photo-catalytic reduction: PCR) and degradation of aqueous pollutants (phenol, methylene blue, and rhodamine B) (photocatalytic oxidation: PCO) under AM 1.5-light irradiation. Despite varying effects depending on the kinds of carbon materials and their surface treatment, composites typically show enhanced PCR activity with maximum 50 times higher $H_2$ production as compared to bare $TiO_2$. Conversely, the carbon-induced synergy effects on PCO activities are insignificant for all three substrates. Colorimetric quantification of hydroxyl radicals supports the absence of carbon effects. However, platinum deposition on the binary composites displays the enhanced effect on both PCR and PCO reactions. These differing effects of carbon materials on PCR and PCO reactions of $TiO_2$ are discussed in terms of physicochemical properties of carbon materials, coupling states of $TiO_2$/carbon composites, interfacial charge transfers. Various surface characterizations of composites (UV-Vis diffuse reflectance, SEM, FTIR, surface area, electrical conductivity, and photoluminescence) are performed to gain insight on their photocatalytic redox behaviors.