• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1177-1184
• /
• 2005

Ab initio quantum chemical molecular orbital calculations have been performed for the unimolecular decomposition of methacrylonitrile ($CH_3C(CN)=CH_2$), especially for HCN and $H_2$ molecular elimination channels. Structures and energies of the reactants, products, and relevant species along the individual reaction pathways were determined by MP2 gradient optimization and MP4 single point energy calculations. Direct four-center elimination of HCN and three-center elimination of H2 channels were identified. In addition, H or CN migration followed by HCN or H2 elimination channels via the methylcyanoethylidene intermediate was also identified. Unlike the case of crotonitrile previously studied, in which the dominant decomposition process was the direct three-center elimination of HCN, the most important reaction pathway should be the direct threecenter elimination of $H_2$ in the case of methacrylonitrile.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1995년도 추계 학술발표회
• /
• pp.126-126
• /
• 1995

• 한국염색가공학회지
• /
• 제7권1호
• /
• pp.43-50
• /
• 1995

The grafting of methacrylonitrile(MAN) onto Kevlar 49 filament surface was carried out by anionic polymerization using sodium methylsulfinylcarbanion formed from sodium hydride and dimethyl sulfoxide(DMSO). The effects of reaction conditions on the grafting percentage(GP) and on the tensile strength of the fiber were investgated. GP marktedly increased with increasing metalation time, and NaH concentration, polymerization temperature and time. The tensile strength of fiber decrased with increasing metalation time, and NaH concentration, polymerization temperature and time. The optimum conditions to increase over 40% of GP with below 10% reduction rate of tensile strength of fiber : NaH concentration ; 30.6 mmol/l/0.5g Kevlar, metalation time : 10min, polymerization tempera- ture : 5$0^{\circ}C$, polymerization time: 20 sec, monomer concentration : 1.12mol/l/0.5g Kevlar.

• Elastomers and Composites
• /
• 제29권5호
• /
• pp.444-452
• /
• 1994

Emulsion graft copolymerizations of vinyl monomers, butyl acrylate(BA), methyl methacrylate(MMA), 2-ethylhexyl acrylate (EHA), glycidyl methacrylate (GMA), 2-hydroxyethyl methacrylate(HEMA), methacrylonitrile(MAN), dimethylaminoethyl methacrylate(DAMA) or 2-vinyl pyridine(VP), onto carboxyl-terminated SBR latex were carried out under different experimental conditions. In case of synthesizing SBR-g-poly(butyl acrylate), the degree of grafting was increased with increasing the amount of emulsifier, polymerization temperature and the amount of initiator. Pull-out strength of resorcinol-formaldehyde-latex(RFL) adhesives formulated with modified latexes was very higher than that of RFL adhesive formulated with ungrafted latex. When the modified latexes with GMA, HEMA, MAN, DAMA or VP were used, the break occurred at cords. Peel strength of RFL adhesives formulated with SBR-g-poly(GMA), SBR-g-poly(HEMA) or SBR-g-poly(VP) was higher by about 1.3 times than that of RFL adhesives formulated with unmodified SBR against nylon cord and was higher by about 2.0 times against polyester cord.

• 공업화학
• /
• 제10권1호
• /
• pp.124-128
• /
• 1999

개별적인 반응성이 알려진 니트로기와 벤질술포닐기가 벤젠 고리 위에서 서로 인접하여 위치할 때 광반응성에 미치는 상호 작용에 대해서 연구하고자 하였다. 니트로기를 포함하는 술포닐 에스테르(cyclohexyl 및 phenyl 2-nitro-${\alpha}$-toluenesulfonate)와 슬포닐아미드(시클로헥실, 페닐, 벤질, 및 피페리딜 2-nitro-${\alpha}$-toluenesulfonamide)의 용액 중 광반응 생성물로부터 벤질술포닐기와 그 ortho 위치에 존재하는 니트로기가 광반응시 서로 상승작용을 하지 않는다는 것을 알 수 있었다. 용액상의 광반응은 이어 필름 상에서의 광반응으로 확인 및 응용되었다. 즉, 두 가지의 2-nitro-${\alpha}$-toluensulfonamide를 포함한 poly(methacrylonitrile)(PMAN) 박막을 NaCl 판 위에 입히고 여기에 254 nm 자외선을 쪼이면서 관찰된 필름의 IR 스펙트럼의 변화로부터도 용액상의 광반응을 일부 확인하였으며 정량실험도 실시하였다. 또한, 본 용액실험의 결과인 광화학적 아민 발생은 poly(glycidyl methacrylate)를 이용한 상 발생 실험에 응용되어 성공적으로 광화학적 에폭시 가교를 수행할 수 있었다.