• Textile Coloration and Finishing
• /
• v.17 no.4 s.83
• /
• pp.15-20
• /
• 2005

Poly(ethylene-co-vinylacetate)(EVA) microspheres were prepared by thermally induced phase separation in toluene. The microsphere formation occurred by the nucleation and growth mechanism in metastable region. The effects of the polymer or pigment weight percentage and cooling rate on microsphere formation were investigated. The microsphere formation and growth were followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by particle size analyzer, became broader when the polymer concentration was higher, the pigment concentration and the cooling rate of EVA copolymer solution were lower.

• Journal of Powder Materials
• /
• v.9 no.1
• /
• pp.32-37
• /
• 2002

In the present study of IGC (Inert Gas Condensation) evaporation-condensation processing study, the effects of IGC convection gas on the crystallographic structure, size and shape of tin oxide nanoparticles were investigated. In addition, the phase transformation of tin oxide nanoparticles was studied after heat treatment. IGC processing was conducted at 1000℃ for 1 hr. The mixture gas of oxygen and helium was used as a convection gas. Metastable tetragonal SnO nanoparticles were obtained at a lower convection gas pressure, whereas amorphous tin oxide nanoparticles were obtained at a higher one. The formation of amorphous phase could be explained by the rapid quenching of the vaporized atoms. The resultant nanoparticles size was about 10 nm with a rounded shape. The tin oxide nanoparticles prepared by IGC were almost transformed to the stable tetragonal SnO₂ after heat treatment.

• Journal of the Korean institute of surface engineering
• /
• v.22 no.1
• /
• pp.3-9
• /
• 1989

The intermetallic compount formation, growth rections, and growth kinetices as functions of the aging temperaturess, time, and the condition of substarte have invedtigted in the Sn/Cu and Sn/Ni bimetal couples. The η'-phase (Cu6Sn5) and $\delta$-phase (Ni3Sn4) were only found to grow at 20 and $70^{\circ}C$in the Sn/Cu and Sn/Ni bimetallic coples repectively. Above that temperatures, all other compounds were formed in sequence of high Sn content plase and the metastable Cu41Sn11 was formed at agend $200^{\circ}C$. The ectivation energy for the growth of intermetallic compounds was 14.7Kxal/mole in the Sn/Cu interface and 26.7Kcal/mole in the Sn/Ni interface.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.56-61
• /
• 1999

The plastic deformation behaviors for powder extrusion of rapidly soildified Al-Si-Fe alloys at high temperature were investigated. During extrusion of Al-Si-Fe alloys, primary Si and intermetallic compound in matrix are broken finely. Additionally, during extrusion metastable $\delta$ phase($Al_4SiFe_2$) intermetallic compound disappears and the equilibrium $\beta$ phase($Al_5FeSi_2$) is formed. In gereral, it was diffcult to establish optimum process variables for extrusion condition through experimentation, because this was costly and time-consuming. In this paper, in order to overcome these problems, we compared the experimental results to the finite element analysis for extrusion behaviors of rapidly solidified Al-Si-Fe alloys. This ingormation is expected to assist in improving rapidly solidified Al-Si alloys extrusion operations.

• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1059-1065
• /
• 1993

The sliding wear behavior of the plasma sprayed zirconia containing 8wt% yttria was investigated over a range of room temperature to 800℃. Both of the friction coefficient and the wear loss increased reaching its maximum at about to 499℃. and then decreased again with increasing temperature up to 800℃. The worn surface at elevated temperature were observed and analyzed by scanning electron microscopy and X-ray diffractometer to study the mechanisms of high temperature wear behavior. Surface morphology of the worn samples changes with temperature. Monoclinic (m)/tetragonal (t) x-ray peak intensity ratio of wear debris and worn surface decreased with increasing temperature. Non-transformable tetragonal (t') to metastable tetragonal (t) phase transformation of worn surface increased with increasing temperature. The results indicate that dehumidification and above phase changes are contributing to the high temperature wear behavior of the plasma sprayed ZrO2-Y2O3 coatings.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.2
• /
• pp.98-102
• /
• 2000

The effect of vacuum heat treatment in the thermal sprayed ceramics coating on a capstan by either high velocity oxygen fuel(HVOF) or plasma thermal spray process was investigated. The coating materials applied on the capstan were tungsten and chrome carbides. In order to characterize the interface between coating layer and bare materials, hardness, adhesion strength, X-ray diffraction(XRD) and microstructural analysis are conducted. The adhesion strength of the carbide coated materials by HVOF process is over 500MPa compared to those of plasma coating process is 230MPa. In case of the carbide coated materials by HVOF process, the adhesion strength is increased to 15MPa and the porosity is reduced under 5% by vacuum heat treatment for 5 hrs at $1000^{\circ}C$. The XRD results reveal that the increasement is believed due to the phase stabilization of metastable $Cr_3C_2$ phase to stable $Cr_{23}C_6$ phase.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.479-486
• /
• 1989

According to the phase diagram, 6Bi2O3.GeO2 composition melts congruently at 93$0^{\circ}C$ and forms a stable ${\gamma}$-6Bi2O3.GeO2 crystal phase below the melting point. But when the melt of this composition was cooled at a rate 1-15$0^{\circ}C$/min without tapping by a glass rod or impurity addition, a metastable $\delta$-6Bi2O3.GeO2 crystal phase was formed. It is due to that as the nucleation energy barrier of $\delta$-6Bi2O3.GeO2 crystals, which have more open and defective structure, is lower than that of ${\gamma}$-6Bi2O3.GeO2 crystals. When impurities or ${\gamma}$-6Bi2O3.GeO2 crystals existed in the melt, stable ${\gamma}$-6Bi2O3.GeO2 crystal phase was formed at various cooling rate. It is because of that the impurities or the ${\gamma}$-6Bi2O3.GeO2 crystals role as a seed crystal and as a result the nucleation energy barrier of ${\gamma}$-6Bi2O3.GeO2 crystals is lowered.

• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.375-381
• /
• 2002

N-type ${\beta}-FeSi_2$ with a nominal composition of $Fe_{0.98}Co_{0.02}Si_2$ powders has been produced by mechanical alloying process and consolidated by vacuum hot pressing. As-milled powders were of metastable state and fully transformed to ${\beta}-FeSi_2$ phase by subsequent isothermal annealing. However, as-consolidated $Fe_{0.98}Co_{0.02}Si_2$ consisted of untransformed mixture of ${\alpha}-Fe_2Si_ 5$ and $\varepsilon$-FeSi phases. Isothermal annealing has been carried out to induce the transformation to a thermoelectric semiconducting ${\beta}-FeSi_2$ phase. The transformation behavior of ${\beta}-FeSi_2$ was investigated by utilizing DTA, a modified TGA under magnetic field, SEM, and XRD analyses. Isothermal annealing at $830^{\circ}C$ in vacuum led to the thermoelectric semiconducting ${\beta}-FeSi_2$ phase transformation, but some residual metallic $\alpha$ and $\varepsilon$ phases were unavoidable even after prolonged annealing. Thermoelectric properties were remarkably improved by isothermal annealing due to the transformation from metallic $\alpha$ and $\varepsilon$ phases to semiconducting phases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.9-17
• /
• 2000

The crystal growth and dissolution rates were calculated by solving a model equation, which involved the dissolution of the metastable phase($\beta$-HNIW) and growth of the stable phase($\varepsilon$-HNIW), together with the mass balance equation. The model has been successfully used to simulate available kinetic data for the $\beta$$\longrightarrow$$\varepsilon$ polymorphic transformation via a solution phase. From the effectiveness factor based on the two-step model, it was found that the surface integration contribution to the process was comparatively small, and a diffusion dependency decreased with an increase of the mass fraction of chloroform in the mixed solvents of ethyl acetate and chloroform. Appling these kinetics in process simulation allowed for the prediction of the product size of $\varepsilon$-HNIW.

• Korean Journal of Materials Research
• /
• v.13 no.5
• /
• pp.292-296
• /
• 2003

In an attempt to enhance phase transformation and homogenization of Mn-doped $FeSi_2$, mechanical alloying of elemental powders was applied. Cold pressing and sintering in vacuum were carried out to produce a dense microstructure, and then isothermal annealing was employed to induce a phase transformation to the $\beta$-$FeSi_2$semiconductor. Phase transitions in this alloy system during the process were investigated by using XRD, EDS and SEM. As-milled powders after 100 h of milling were shown to be metastable state. As-sintered iron silicides consisted of untransformed mixture of $\alpha$-$Fe_2$$Si_{5}$and $\varepsilon$-FeSi phases. $\beta$-$FeSi_2$phase transformation was induced by subsequent isothermal annealing at $830^{\circ}C$, and near single phase of $\beta$-$FeSi_2$was obtained after 24 h of annealing. Thermoelectric properties in terms of Seebeck coefficient, and electrical conductivity were evaluated and correlated with phase transformation. Seebeck coefficient electrical resistivity and hardness increased with increasing annealing time due to $\beta$ phase transformation.