Atmospheric corrosion severity associated with aircraft parking environment was studied using metallic specimens, and temperature and humidity sensors installed at each aircraft operating base. Data were analyzed after a year of exposure. Silver was used to measure chloride deposition by integrating X-ray photoelectron spectroscopy depth profiles. Carbon steel was utilized to determine the corrosion rate by measuring the weight loss. The time of wetness was determined using temperature and humidity sensor data. Analysis of variance followed by Tukey's "honestly significant difference" test indicated that atmospheric environment inside the shelter varied significantly from that of unsheltered parking environment. The corrosion rate of unsheltered area also varies with the roof. Hierarchical clustering analysis of the measured data was used to classify air bases into groups with similar atmospheric corrosion. Bases where aircraft park at a shelter can be grouped together regardless of geographical location. Unsheltered bases located inland can also be grouped together with sheltered bases as long as the aircraft are parked under the roof. Environmental severity index was estimated using collected data and validated using the measured corrosion rate.
만기요람은 조선후기 왕명에 의하여 편찬된 국정운용 지침서로서 엮어진 책이다. 특별히 재용 편을 통해서는 당시의 조선후기 국가재정의 이모저모를 일목요연하게 엿볼 수 있다. 만기요람 재용 편에서 오늘날에도 중시되고 있는 비철금속 자원으로 금, 은, 구리, 납의 생산지 분포와 성쇠 및 종류별 용도를 자세히 설명하였다. 농업지리 내용으로 연간 곡물 총생산량과 전답 및 전세(田稅) 부과와 그 기준 뿐만 아니라, 고금을 통해 외부세계에 널리 알려진 인삼에 대해, 그리고 수리(水利)를 위한 제언(堤堰)의 분포와 기능 등을 밝히고 있다, 한편, 소나무의 종류, 분포 및 봉산(封山)정책 등의 내용은 임업지리 관련내용이라 할 수 있다. 상업지리 관련내용으로 육의전(六矣廛), 시전(市廛), 평시서(平市署), 난전(亂廛), 향시(鄕市) 등 여러 장시(場市)의 종류와 북쪽 변방의 국경시장인 회령개시(會寧開市)와 경원개시(慶源開市)의 분포와 규모, 성쇠 등에 대해 설명하고 있다. 교통지리와 관련한 내용으로 조창(漕倉)의 분포와 기능 등 다양한 당시의 지리관련 내용들이 들어있다. 이들 내용들은 현대 지리적 분류체계와 연결시켜 해석하여 보면 대단히 의미 있는 지리정보들임을 알 수 있다. 당시 나라의 임금이 비망록처럼 지척에 두고 읽는 책자 속에, 실용적 지리관련 지식과 필요한 정보들이 국왕의 국정운용에 직결되는 요체로서 정리되어 매우 중요하게 쓰이고, 커다란 영향을 미쳤음을 짐작할 수 있다.
The manufacturing cost of thin-film photovoltics can potentially be lowered by minimizing the amount of a semiconductor material used to fabricate devices. Thin-film solar cells are typically only a few micrometers thick, whereas crystalline silicon (c-Si) wafer solar cells are $180{\sim}300\mu}m$ thick. As such, thin-film layers do not fully absorb incident light and their energy conversion efficiency is lower compared with that of c-Si wafer solar cells. Therefore, effective light trapping is required to realize commercially viable thin-film cells, particularly for indirect-band-gap semiconductors such as c-Si. An emerging method for light trapping in thin film solar cells is the use of metallic nanostructures that support surface plasmons. Plasmon-enhanced light absorption is shown to increase the cell photocurrent in many types of solar cells, specifically, in c-Si thin-film solar cells and in poly-Si thin film solar cell. By proper engineering of these structures, light can be concentrated and coupled into a thin semiconductor layer to increase light absorption. In many cases, silver (Ag) nanoparticles (NP) are formed either on the front surface or on the rear surface on the cells. In case of poly-Si thin film solar cells, Ag NPs are formed on the rear surface of the cells due to longer wavelengths are not perfectly absorbed in the active layer on the first path. In our cells, shorter wavelengths typically 300~500 nm are also not effectively absorbed. For this reason, a new concept of plasmonic nanostructure which is NPs formed both the front - and the rear - surface is worth testing. In this simulation Al NPs were located onto glass because Al has much lower parasitic absorption than other metal NPs. In case of Ag NP, it features parasitic absorption in the optical frequency range. On the other hand, Al NP, which is non-resonant metal NP, is characterized with a higher density of conduction electrons, resulting in highly negative dielectric permittivity. It makes them more suitable for the forward scattering configuration. In addition to this, Ag NP is located on the rear surface of the cell. Ag NPs showed good performance enhancement when they are located on the rear surface of our cells. In this simulation, Al NPs are located on glass and Ag NP is located on the rear Si surface. The structure for the simulation is shown in figure 1. Figure 2 shows FDTD-simulated absorption graphs of the proposed and reference structures. In the simulation, the front of the cell has Al NPs with 70 nm radius and 12.5% coverage; and the rear of the cell has Ag NPs with 157 nm in radius and 41.5% coverage. Such a structure shows better light absorption in 300~550 nm than that of the reference cell without any NPs and the structure with Ag NP on rear only. Therefore, it can be expected that enhanced light absorption of the structure with Al NP on front at 300~550 nm can contribute to the photocurrent enhancement.
항균 방충제가 은(Ag), 구리(Cu), 납(Pb), 철(Fe) 등의 재질로 구성된 문화재에 미치는 영향을 알아보고자 Oddy test를 실시하였다. 금속시편으로는 은(99.9%), 구리(99.9%), 납(99.9%), 철(99.5%)을 사용하였다. 항균 방충제를 60ml 제조 시 주요성분인 B77 Essential oil mixture에 대하여 표준물질 농도인 17.5%를 기준으로 ${\pm}1{\sim}2%$의 농도로 제조하였으며, 저농도의 B77 Essential oil mixture에 항균성분인 BS-2와 BS-3를 각각 첨가하여 제조하였을 때 금속시편에 미치는 영향도 조사하였다. Oddy test 실험 후의 표면관찰, 중량측정, 색도측정 및 SEM-EDS분석으로 표면의 변화를 알아보았다. 실험 결과 납(Pb)시편이 가장 큰 표면변화를 보였으며, 색측계 측정결과 구리(Cu)의 색차가 가장 컸다. 또한 이 실험을 통해서 B77 Essential oil mixture의 농도 19%에서 실험 전과 후의 시편에서 변화가 가장 컸으며, B78 Essential oil mixture가 포함된 약품에서 비교적 큰 변화가 나타났다. 즉, B77 Essential oil mixture의 농도가 높을 경우에는 표면 변화가 컸으며, B77 Essential oil mixture가 저농도일 경우 B78 Essential oil mixture가 포함되어 제작된 약품에서 비교적 큰 변화를 확인할 수 있었다. 그러나 B78 Essential oil mixture를 첨가하지 않은 저농도의 B77 Essential oil mixture에서는 표면변화가 크지 않음을 확인할 수 있었다.
The systematic study of the future began with curiosity and imagination about the future; a unique trait of human mental effort-and this seems to be based on the idea that the future can be different depending on current choices or effort. In this sense, it would be seemly to encourage more interest and academic study on the progress of future fashion. In this study, we examine recent changes of fashion material; e.g. that which science and technology have more impact and importance in futuristic fashion since the 1990�s. The period analysed is from the1990's to the present and related data from recent fashion collections and fashion books has also been included The current prediction of the future is largely based on what was formed between the 19th Century and the 20th Century which has persisted until now and has been influenced by the view that science will play a bigger role in the future. This is especially reflected in fashion which chiefly represents material culture. New materials used for fashion are strong and permanently durable, in addition to being very light, thin, flexible, hygienic, ecological and comfortable to wear-almost like a second skin. These fashionable new materials roughly function in two different ways according to external and internal characteristics. First, they cause external change. Second, they exemplify or allow new functions. Examples of external change are the use of silver color, achromatic color, metallic material, smooth-to-the-touch shiny material and the use of luminous material. Examples of the extended function of clothing through the use of new materials are the use of conducting thread, the use of special material for blocking & opening and the use of material which changes colors as the surroundings change. These days, the use of new material which changes its appearance is a novelty unique to the fashion world but we also expect to witness the debut of diverse new materials with extended inner functions.
Ti-6Al-4V alloy have been used for dental implant because of its excellent biocompatibility, corrosion resistance, and mechanical properties. However, the integration of such implant in bone was not in good condition to achieve improved osseointergraiton. For solving this problem, calcium phosphate (CaP) has been applied as coating materials on Ti alloy implants for hard tissue applications because its chemical similarity to the inorganic component of human bone, capability of conducting bone formation and strong affinity to the surrounding bone tissue. Various metallic elements, such as strontium (Sr), magnesium (Mg), zinc (Zn), sodium (Na), silicon (Si), silver (Ag), and yttrium (Y) are known to play an important role in the bone formation and also affect bone mineral characteristics, such as crystallinity, degradation behavior, and mechanical properties. Especially, Zn is essential for the growth of the human and Zn coating has a major impact on the improvement of corrosion resistance. Plasma electrolytic oxidation (PEO) is a promising technology to produce porous and firmly adherent inorganic Zn containing $TiO_2(Zn-TiO_2)$coatings on Ti surface, and the a mount of Zn introduced in to the coatings can be optimized by altering the electrolyte composition. In this study, corrosion behavior of Ti-6Al-4V alloy after plasma electrolytic oxidation in solutions containing Ca, P and Zn were studied by scanning electron microscopy (SEM), AC impedance, and potentiodynamic polarization test. A series of $Zn-TiO_2$ coatings are produced on Ti dental implant using PEO, with the substitution degree, respectively, at 0, 5, 10 and 20%. The potentiodynamic polarization and AC impedance tests for corrosion behaviors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to +2000mV. Also, AC impedance was performed at frequencies ranging from 10MHz to 100kHz for corrosion resistance.
The Charyong batholith extends northeasterly from the west coast to the west of Wonju in the central parts of Korean Penninsula. The batholith is separated by the metamorphic complex into the northern and the southern granites. and is believed to intrude during the Daebo orogeny of early Jurassic to early Cretaceous age. It constitutes a sort of anticlinorium and the metamorphic complex can be regarded as a huge roof pendant. The modal analysis indicates that the Charyong batholith belongs to a series of adamellite-granodiorte-to-nalite. The oxidation property happened during a magmatic segregation reveals that the batholith shows in general orogenic assimilation trend. The granites of early to middle Jurassic age show orogenic assimilation trend, whereas those of late Jurassic to early Cretaceous age post orogenic noassimilation trend. The fracture system of the whole region is two folds: the fractures having attitute of $N25{\sim}40^{\circ}E$ and $70^{\circ}SE$ are regarded as tension fractures, and those of NS, and 50E to vertical and $N50^{\circ}E$ and $80^{\circ}E$ to vertical as shear fractures. All these facts suggest definitely that the Charyong batholith is the syntectonic intrusives during the Daebo orogeny. The mineral deposits in the area studied are gold-silver deposits in majority which was named by O,J.Kim(1970) as the Chonan metallogenic province. They are sulfides baring quartz veins which were emplaced along the tension and shear fractures originated by the Daebo orogeny.
Purpose: Kilovoltage computed tomography (kV-CT) is essential for radiation treatment planning. However, kV-CT images are significantly distorted by artifacts when a metallic prosthesis is present in the patient's body. Thus, the accuracies of target delineation and treatment dose calculation are inevitably lowered. We evaluated the accuracy of the calculated doses using an image restoration method with hybrid CT, which was introduced in our previous study. Methods: A cylindrical phantom containing four metals, namely, silver, copper, tin, and tungsten, was scanned using kV-CT and megavoltage CT to produce hybrid CT images. We created six verification plans for three head and neck patients on kV-CT and hybrid CT images of the phantom and calculated their doses. The actual doses were measured with film patches during beam delivery using tomotherapy. We used the gamma evaluation method to compare dose distribution between kV-CT and hybrid CT with three gamma criteria, namely, 3%/3 mm, 2%/2 mm, and 1%/1 mm. Results: The gamma pass rates decreased as the gamma criteria were strengthened, and the pass rate of hybrid CT was higher than that of kV-CT in all cases. When the 1%/1 mm criterion was used, the difference in gamma pass rates between them was up to 13%p. Conclusions: According to our findings, we expect that the use of hybrid CT can be a suitable approach to avoid the effect of severe metal artifacts on the accuracy of dose calculation and contouring.
익산 미륵사지 석탑에서 출토된 사리장엄 중 금제유물은 사리내호, 봉영기 등 총 494점이다. 금제유물은 대부분 가공을 통해 제작하였으나 이 중 금정 22점과 금괴 4점은 형태를 가지고 있지 않은 금괴로 가공품을 만들기 전 단계의 것으로 판단된다. 일반적으로 금은 자연 상태에서 산화물이 아닌 금속의 형태로 존재하므로 용융, 가공 과정만을 통해서 형태를 제작할 수 있다. 그러나 자연금의 경우 은, 동 등 불순물이 포함되어 있으므로 연성을 가지기 위해서는 정제가 필요하다. 미륵사지 석탑 사리장엄에서 출토된 금제유물을 분석하여 그 특성을 알아보고자 하였다. 분석결과 순금제품과 은이 함유된 금제품, 자연금으로 추정되는 금괴류로 분류할 수 있었다. 순금으로 제작된 유물은 사리내호, 금제고리, 금제소형구슬이며, 1wt.% 내외의 동을 함유하고 있다. 이들 유물들은 두드려 형태를 만들기 위해 순금으로 제작한 것으로 보인다. 은이 함유된 유물은 봉영기, 족집게, 금제고리, 금정, 금괴 등이며, 강도가 필요한 형태를 제작하기 위해 은이 함유된 것으로 보인다. 특히, 금정, 금괴는 은, 동의 분포, 형태로 추정하였을 때 자연금으로 보이나 한국의 자료가 충분하지 않아 단정할 수는 없으며, 향후 다양한 지역의 괴 형태 금제유물에 대한 종합적인 조사가 이뤄져야 가능할 것으로 보인다. 금세공기술면에서는 미륵사지 석탑출토 사리장엄은 매우 정교한 기술을 보이고 있다. 또한 무게분포를 살펴보았을 때 한 냥의 명문이 있는 것의 무게가 14g 내외로 이를 기준으로 반 냥, 두 냥 등으로 무게가 분포하고 있다.
국내(國內)의 여러 열수금속광상(熱水金屬鑛床)에서 채취(採取)한 섬아연석(閃亞鉛石)의 조성(組成) 변화(變化)를 광산(鑛山) 및 국지적(局地的) 단위(單位), 그리고 광역적(廣城的) 단위(單位)로 조사(調査)하였다. 섬아연석(閃亞鉛石)의 Fe, Mn, Cd 함량(含量)은 electron probe microanalyzer(EPMA) 에 의한 부분분석(部分分析) 방법(方法)으로 측정(測定)하였다. 제1연화광산(第一蓮花鑛山)의 월암광산(月岩鑛山)에서 심도별(深度別)(0m에서 -420m level까지)로 채취(採取)한 섬아연석(閃亞鉛石)의 경우 Fe, Cd 함량(含量)은 심도(深度)에 따라 큰 변화(變化)가 없는 반면(反面) Mn 함량(含量) 변화(變化)는 현저하였다. 반심성암(半深成岩) 및 분출암(噴出岩)의 활동(活動)과 성인적(成困的)으로 관련(關聯)된 Zn-Pb 광상(鑛床)의 경우 섬아연석(閃亞鉛石)은 그 Mn 함량(含量)이 높고 (MnS 1.0 mole% 이상(以上)) Cd 함량(含量)이 낮은 (CdS 0.5 mole% 이하(以下)) 특징(特徵)을 보인다. 비교적(比較的) Mn함량(含量)이 높은 섬아연석(閃亞鉛石)은 Fe함량(含量)도 높다. 일반적(一般的)으로 각(各) 광상별(鑛床別)로 보면 Mn에 비(比)해 Cd 함량변화(含量變化)는 일정(一定)하다. 대부분(大部分)의 W광상(鑛床)과 일부(一部) Au-Ag광상(鑛床)에서 산출(産出)된 섬아연석(閃亞鉛石)의 경우 Cd함량(含量)이 현저하게 높으나, 대부분(大部分)의 base metal 광상(鑛床) 및 Fe광상(鑛床)에서는 Cd함량(含量)이 낮다. 성인적(成因的)으로 심성암(深成岩)의 활동(活動)과 관련(關聯)된 금속광상(金屬鑛床)에서 산출(産出)되는 섬아연석(閃亞鉛石)의 Cd 함량(含量) 변화(變化)는 다양한 경향을 나타낸다. 섬아연석중(閃亞鉛石中)의 Cd 근원(根源)은 magma성(性) 내지(乃至)는 후(後) magma성(性)과정중(過程中) 원래(原來)부터 존재(存在)하던 유용(有用) 함량(含量)에 기인(起因)된다고 판단(判斷)된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.