• Journal of Magnetics
• /
• 제8권3호
• /
• pp.113-117
• /
• 2003

$Co_{78-x}Pt_xB_{10}Si_{12}$ alloys were produced using the melt-spin process in order to study the crystallization behavior and ensuing magnetic properties of the $Co_{78-x}Pt_xB_{10}Si_{12}$ (Co-Pt) amorphous alloys as a function of the Pt content. We showed that when $\chi$ $>$ 15 well below its stoichiometric composition, CoPt crystallized in the amorphous alloy, thus greatly altering the crystallized microstructure and magnetic properties during annealing. Below this composition, the main crystallization product was Co with Pt dissolved in its lattice. In spite of the nucleation of CoPt with high magnetic anisotropy, the highest coercivity was obtained when x was 15. It was also concluded that the Pt addition deteriorated the glass stability, triggering the devitrification at a progressively lower temperature.

• 자원리싸이클링
• /
• 제5권3호
• /
• pp.31-36
• /
• 1996

The metallic copper was recovered from sludge of the copper electro-plating plant by pyrometallurgical process. The reducing agent was Pyrolysized from waste tires and the flux was a mixture $Na_2CO_3$, $NaB_4O_7$, and glass. The green sludge contained 87.5% moisture and 12.5% solid with 56.5% Cu and 1.59% Fe. The sludge dried at $100^{\circ}C$ was analyized to be $Cu_4SO_4(OH)_6{\cdot}2H_2O$ and CuO by XRD analysis. The former was 84% and the latter 16%, However, the calcined sludge at $500^{\circ}C$ was 49% $Cu_2O(SO_4)$ and 51% CuO. The sludge could by smelted at $1100^{\circ}C$ for two hours with 6 to 8 moles carbon with respect to copper to produce metallic copper (>90%) with recovery of 9% above.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.258-262
• /
• 2008

Micro forming is a suited technology to manufacture very small metallic parts(several $mm{\sim}{\mu}m$). In this study, the micro forming property was studied, using Al5083 superplastic alloy with micro grain, suitable for the micro forming process and Zr-BMG amorphous with pseudo-superplastic phenomena in the supercooled liquid state. Micro forming experiments under stastic load status showed that distortion by slip and spin of the grain system and slip inside the grain was observed in the Al5083 superplastic alloy. In case of Zr-BMG, because there is no grain, the distribution of the forming property was similar to the load distribution between punch and metal.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.589-596
• /
• 1995

In the present paper some of the magnetic properties of the nanocrystalline Fe-based magnets produced by an appropriate annealing of their metallic glass precursors are reviewed. These properties are discussed on the grounds of their characteristics measured at the elevated temperatures. It is shown that the effective magnetostriction these magnets display, results from the competition among two contributions of the opposite sign originating from the individual magnetic phases, crystalline phase and the residual glassy matrix in which the nanocrystallites are embedded. It is also shown that at certain conditions the magnets considered expose superparamagnetic behavior and that their isothermal magnetization characteristics can successfully be used to calculate the distribution of the particle volumes. Application of the recently invented new genetic algorithm method, a powerful tool to calculate these distributions is, finally, presented.

• 한국재료학회지
• /
• 제34권7호
• /
• pp.363-369
• /
• 2024

In this study, the magnetocaloric effect and transition temperature of bulk metallic glass, an amorphous material, were predicted through machine learning based on the composition features. From the Python module 'Matminer', 174 compositional features were obtained, and prediction performance was compared while reducing the composition features to prevent overfitting. After optimization using RandomForest, an ensemble model, changes in prediction performance were analyzed according to the number of compositional features. The R2 score was used as a performance metric in the regression prediction, and the best prediction performance was found using only 90 features predicting transition temperature, and 20 features predicting magnetocaloric effects. The most important feature when predicting magnetocaloric effects was the 'Fe' compositional ratio. The feature importance method provided by 'scikit-learn' was applied to sort compositional features. The feature importance method was found to be appropriate by comparing the prediction performance of the Fe-contained dataset with the full dataset.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.109-109
• /
• 1991

자기변형 효과가 큰 Metallic glass 2605SC에 20cm의 광섬유를 붙여서 교류 자기장 측정을 위한 Mach-Zehnder형 광섬유 간섭계를 구성하였다. 능동 위상 추적 방법을 사용하여 간섭계의 위상차를 최대 측정감도를 갖는 $\pi$/2로 고정시킴으로써 온도 및 진동등의 영향에 의한 신호소멸 현상을 해결하였다. 0.2~2.0 KHz에서 주파수특성, dc bias의 영향 그리고 교류 자기장과 간섭계 출력 사이의 선형성을 조사하였다.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 춘계학술발표대회 논문집
• /
• pp.9-14
• /
• 2005

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2004년도 International Symposium on Powder Materials and Processing
• /
• pp.100-101
• /
• 2004

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1148-1148
• /
• 2006

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.97-104
• /
• 2006

ELID(Electrolytic In-process Dressing) grinding is an excellent technique for mirror grinding of various advanced metallic or nonmetallic materials. A polishing process is also required for elimination of scratches present on ELID grinded surfaces. MAP(Magnetic Assisted Polishing) has been used as polishing method due to its high polishing efficiency and to its resulting in a superior surface quality. This study is describing an effective fabrication method combining ELID and MAP of nano-precision mirror grinding for glass-lens molding mould. It also presents some techniques for achieving the nanometer roughness of the hard metals, such as WC-Co, which are extensively used in precision tooling material.