• 제목/요약/키워드: Metal working fluids(MWF)

검색결과 8건 처리시간 0.026초

우리나라에서 사용하는 광물유의 유해특성과 관리대책에 관한 연구 - 공기중 MWF 미스트의 측정방법과 관리대책 - (Control and Investigation for Hazardous Characteristics of Metal Working Fluids Used in Korea - A Study on the Control and Sampling Method for Airborne MWF mist -)

  • 백남원;박동욱;윤충식;조숙자;김신범;임호섭
    • 한국산업보건학회지
    • /
    • 제7권2호
    • /
    • pp.171-180
    • /
    • 1997
  • The objectives of this study were both 10 discuss the sampling method for airborne metalworking fluids(MWF)' mist and 10 suggest measures to minimize worker's exposure to carcinogen contained in metalworking fluids. In order to measure airborne MWF mist, it seems to be appropriate to use NIOSH Method #0500(filler weight) rather than NIOSH Method # 5026(analysis by FTIR). Because MWF mist on PVC filter evaporated and migrated during sampling, worker's exposure to MWF could be underestimated. So, when evaluating worker's exposure to MWF mist, other environmental conditions also must be considered. Enclosure and local exhaust ventilation system seems to he the most effective measure and must be constructed with process facility. In order to control worker exposure to carcinogens contained in MWF, distillation type and condition for crude oil, PAH concentration in MWF, and viscosity index of MWF must legally be described.

  • PDF

금속가공유 취급 작업장의 생물학적 인자 노출평가 (Microbial Assessment in Metal-Working Fluids Handling Industry)

  • 박현희;박동진;박해동
    • 한국산업보건학회지
    • /
    • 제24권3호
    • /
    • pp.300-309
    • /
    • 2014
  • Objectives: The objective of this study is to evaluate microbial exposure hazards in the metal-working fluids(MWF) handling industry. Methods: Air quality parameters(airborne bacteria, fungi, endotoxin and oil mist) and bulk MWF in storage tanks were evaluated at 54 points at nine sites in South Korea. Results: The geometric means(GM) of culturable airborne bacteria, fungi, endotoxin and oil mist concentration were $133CFU/m^3$(n=376, range $7{\sim}6,510CFU/m^3$), $159CFU/m^3$(n=381, range $7{\sim}8,469CFU/m^3$), $8.06EU/m^3$(n=103, range $0.34{\sim}280.4EU/m^3$) and $0.20mg/m^3$(n=104, range $0.01{\sim}2.87mg/m^3$), respectively. The ratio of indoor to outdoor concentration was 2.7 for bacteria, 6.1 for endotoxin, and 4.8 for oil mist. Even though average airborne bacteria concentration did not exceed recommended exposure limits($1,000CFU/m^3$), MWF in the storage tanks was highly contaminated with bacteria(arithmetic mean $2.1{\times}10^6CFU/ml$) and exceeded recommended bacteria limits($10^5CFU/ml$). Conclusions: It is necessary for MWF handling workplaces to conduct periodical biohazard inspection of MWF storage tanks. Additionally, further research may be necessary to establish biological occupational exposure limits.

금속가공유 취급 업종에서 우점하는 세균 및 진균의 정성평가 (Identification of Predominant Bacteria and Fungi in the Industry Treating Soluble Metal Working Fluids)

  • 박해동;박동진;박현희
    • 한국산업보건학회지
    • /
    • 제24권4호
    • /
    • pp.416-424
    • /
    • 2014
  • Objectives: The objective of this study is to analyze the predominant microorganisms in the industry treating MWFs(Metal working fluids). Methods: The bacteria and fungi were collected by agar plate impaction and bulk MWFs in storage tank at 54 sites in 9 shops in South Korea. The dominant bacteria and fungi isolated from agar media were identified by fatty acid analysis and morphological analysis, respectively. Results: Totally 111 dominant bacteria were identified in the process, outdoor, and bulk MWFs. The predominant bacterial genus was Micrococcus and Bacillus in the process and outdoor, Pseudomonas in bulk MWF. Among the identified 119 strains of fungi, Cladosporium and Penicillium genus were dominated. The ratios of bacteria designated biosafety level 2 and 1 were 30% and 21%, respectively. Conclusions: This study has investigated the dominant microorganisms in soluble MWF using industry. And it was useful that the qualitative evaluation method along with quantitative analysis for better understanding of the biological factors in the work environment.

수용성 금속가공유 취급사업장에서 세균농도와 환경인자의 관계에 대한 연구 (A Study of the Relations between the Bacterial Concentration and the Environmental Factors in the Factories using Water Soluble Metal Working Fluids)

  • 박해동;박현희;김정현;장재길
    • 한국산업보건학회지
    • /
    • 제22권4호
    • /
    • pp.284-292
    • /
    • 2012
  • Objectives: The objective of this study was to investigate the relations between the bacterial concentration and the environmental factors in the water soluble metal working fluids at factories. Methods: The bacterial concentrations for airborne and fluid samples of 7 factories were quantified during the summer season. And we statistically analysed the relations between the bacterial concentrations and the factors such as temperature, relative humidity, usage quantity, mixing ratio and exchange interval. Results: The geometric mean levels of the airborne bacterial concentrations were 79.1(range : N.D.~686) $CFU/m^{3}$ and 68.1(range: N.D.~919) $CFU/m^{3}$ in the process and outdoor. The airborne bacterial concentrations showed no statistical difference by process, usage quantity, mixing ratio and exchange interval. The airborne bacterial concentrations had negatively weak correlations with air temperature and relative air humidity(p<0.05). The bacterial concentrations and pH showed significantly negative correlations in the fluids(p<0.05). And the airborne bacterial concentrations in factories and those in metal working fluids showed no statistical relationship. Conclusions: In the water soluble metal working fluids using factories, the airborne bacterial concentrations of the process were related to those of the outdoor and environmental factors, rather than the onsite contaminated metal working fluids.

절삭설비의 소음환경개선에 관한 연구

  • 이내우;허현철;전성균
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 1998년도 추계 학술논문발표회 논문집
    • /
    • pp.99-104
    • /
    • 1998
  • 산업현장에서 많이 쓰이는 절삭설비(Metal Working : MW)는 매우 다양하여 일일이 열거하기는 어렵고 주로 자동차생산업종, 농기구제조업종, 각종 기계기구 생산업종, 경금속가공업종 등에서 매우 광범위하게 사용되고 있다. 이들 업종에서 연마, 절단, 천공, 드릴링, 터닝(turning)등을 수행하는 많은 근로자들이 다량의 MWF(Metal Working Fluids) 뿐만 아니라 열악한 소음환경에 노출되고 있다. (중략)

  • PDF

수용성 금속가공유 폐액의 생물학적 처리 (Biological Treatment on Wastewater of Soluble Metal Working Fluids)

  • 차미선;한창민;박근태;조순자;손홍주;이상준
    • 생명과학회지
    • /
    • 제13권6호
    • /
    • pp.917-923
    • /
    • 2003
  • P. aeruginosa EMS1에 의한 수용성 절삭유의 생물학적 처리를 위한 환경요인과 최적조건을 검토한 결과는 다음과 같다. 절삭유속에 함유된 각종 성분을 이용한 P aeruginosa EMSl의 생육 및 절삭유 분해 가능성을 검토하기 위하여 증류수에 절삭유를 1% 농도로 첨가하여 멸균한 후, P aeruginosa EMSl를 접종하여 균체 생육도 및 COD 제거율을 조사한 결과, 균주의 생육도는 극히 미약하고 약 12%의 COD 제거능을 가지고 있었다. 이것은 균주의 생육과 효율적인 COD제거능을 위하여 절삭유 속에 함유된 성분 외의 다른 일반적인 배지성분이 필요함을 시사한다. P. aeruginosa EMS1에 의한 1% 수용성 절삭유의 COD 제거율과 균주 생육도 향상을 위한 최적 배지조성은 0.3% NH_4NO_3,\; 0.05%\; K_2HPO_4,\; 0.04% KH_2PO_4,\; 0.05%\; MgSO_4.7H_2O,\; 0.03%\; CaCl_2.2H_2O,\; 0.04%\; FeSO_4.7H_2O$이었고, 최적배양 조건은 pH 7,$30^{\circ}C$, 50m$\ell$ / 300m$\ell$flask이었다. 이 조건에서 배양 4일 후, 87%의 COD가 제거되었다. 최적배지에서 COD 제거에 미치는 절삭유 농도의 영향을 조사한 결과, 절삭유 농도가 낮을수록 relative COD(%)가 낮았으며, 균체 생육도가 높음을 알 수 있었다. 따라서 본 연구의 결과를 바탕으로 하여 현재 폐절삭유의 처리를 위해 시행되고 있는 물리화학적 처리 시스템의 후속 공정으로 생물학적 처리시스템을 구축하고, 표준 균주로서 P. aeruginesa EMS1이 사용될 경우, 잔여 절삭유의 완전 분해가 가능할 것으로 사료된다.

Microbial Exposure Assessment in Sawmill, Livestock Feed Industry, and Metal Working Fluids Handling Industry

  • Park, Hyun-Hee;Park, Hae-Dong;Lee, In-Seop
    • Safety and Health at Work
    • /
    • 제1권2호
    • /
    • pp.183-191
    • /
    • 2010
  • Objectives: The objective of this study is to investigate the distribution patterns and exposure concentrations of bioaerosols in industries suspected to have high levels of bioaerosol exposure. Methods: We selected 11 plants including 3 livestock feed plants (LF industry), 3 metal working fluids handling plants (MWFs industry), and 5 sawmills and measured total airborne bacteria, fungi, endotoxins, as well as dust. Airborne bacteria and fungi were measured with one stage impactor, six stage cascade impactor, and gelatin filters. Endotoxins were measured with polycarbonate filters. Results: The geometric means (GM) of the airborne concentrations of bacteria, fungi, and endotoxins were 1,864, $2,252\;CFU/m^3$, and $31.5\;EU/m^3$, respectively at the sawmills, followed by the LF industry (535, $585\;CFU/m^3$, and $22.0\;EU/m^3$) and MWFs industry (258, $331\;CFU/m^3$, and $8.7\;EU/m^3$). These concentrations by industry type were significantly statistically different (p < 0.01). The ratio of indoor to outdoor concentration was 6.2, 1.9, 3.2, and 3.2 for bacteria, fungi, endotoxins, and dust in the LF industry, 5.0, 0.9, 2.3, and 12.5 in the MWFs industry, and 3.7, 4.1, 3.3, and 9.7 in sawmills. The respiratory fractions of bioaerosols were differentiated by bioaerosol types and industry types: the respiratory fraction of bacteria in the LF industry, MWF industry, and sawmills was 59.4%, 72.0%, and 57.7%, respectively, and that of fungi was 77.3%, 89.5%, and 83.7% in the same order. Conclusion: We found that bioaerosol concentration was the highest in sawmills, followed by LF industry facilities and MWFs industry facilities. The indoor/outdoor ratio of microorganisms was larger than 1 and respiratory fraction of microorganisms was more than 50% of the total microorganism concentrations which might penetrate respiratory tract easily. All these findings suggest that bioaerosol in the surveyed industries should be controlled to prevent worker respiratory diseases.

금속가공유를 취급하는 남성 근로자의 접촉피부염 (Contact dermatitis among male workers exposed to metalworking fluids)

  • 진영우;이준영;김은아;박승현;채창호;최용휴;김규상
    • Journal of Preventive Medicine and Public Health
    • /
    • 제30권2호
    • /
    • pp.381-391
    • /
    • 1997
  • 산업장에서 사용되는 오일의 종류와 그 폭로 형태의 차이에 따른 피부질환의 유병률과 접촉성 피부질환의 주요특성을 파악하기 위하여 사용오일의 분석, 1회의 방문진찰과 2회에 걸친 설문조사를 실시하였으며, 아래와 같은 결과를 얻었다. 1. 비수용성 절삭유의 분석결과, 탄소수 12-20개 사이의 지방탄화수소(do, tri, tetra... decane)가 49.04%였으며, methy-naphthalene 등의 방향족이 14.90% 기타지방 및 방향족탄화수소화합물이 36.04%였으며, 방청유의 분석결과 대부분(90.99%)이 탄소수 6-9개 사이의 지방족 화합물로 구성되어 있으며, 일부 알콜 및 에스테르계 화합물도 포함되어 있어 두 오일은 서로 다른 물질이며, 따라서 자극성도 다를 것으로 생각된다. 2. 피부과적 진찰 결과, 전 연구대상에서 전체 피부 질환의 빈도(시점유병률)는 17명(연구대상자 100명당 53.1)이었다. 접촉피부염, 오일 여드름과 모낭염의 빈도(시점유병률)는 7명(12.7), 11명(20.0)이었으며, 광알러지성 피부염, 염소성 여드름, 종양, 피부변색은 관찰되지 않았다. 3. 자기기입식 설문조사 결과, 두 군에서 접촉피부염의 누적유병률과 1년간 기간유병률은 연구대상자 100명당 28.4, 16.7와 15.3, 13.0로서 차이를 보였으나, 통계학적으로 유의하지 않았고(p>0.05), 연령과 접촉 기간에 따른 차이는 없었다(p>0.05). 4. 발생까지의 기간은 절삭유접촉군의 경우 4개월 미만이 8명(22.9%)이었고, 26명(74.3%)이 2년 이내인 것으로 나타났으나, 방청유접촉군의 경우 응답자 6명 중 4명(66.7%)이 2년 이후로 대답해 군간에 뚜렷한 차이를 보였으며(p<0.05), 10년 이상인 경우도 절삭유 접촉군에서 2명, 방청유접촉군에서 1명이 있었다. 호발계절은 절삭유접촉군의 경우 응답자 41명중 16명(42.1%)이 여름에 가장 많은 것으로 답하였으나 방청유접촉군의 경우 계절에 따른 차이를 보이지 않았다(p>0.05). 5. 유병기간은 양 군에 차이가 없었으며(p>0.05), 68.6%가 1개월 이내에 회복되는 것으로 나타났고, 6개월이상 잘 낫지 않는 정우도 3명(7.9%)이 있었다. 재발횟수는 절삭유접촉군에서는 1년에 수회가 응답자 15명(44.1%)로 가장 많았으나, 방청유접촉군에서는 1회로 끝난 경우가 3명(42.9%)로 가장 많았고, 전체 응답자 41명중 26명(63.4%)이 1년에 1회 이상 재발하는 것으로 나타났다. 6. 주요 발생형태로는 홍반성 구진이 절삭유접촉군과 방청유접촉군에서 각각 21명(60.0%), 6명(85.7%), 전체적으로는 27명(64.3%)으로서 가장 많았으며, 수포 형성이 각각 12명(34.3%), 1명(14.3%), 전체적으로 13명(31%)로 나타났다. 7. 처음 접촉피부염 발생시 보호구를 착용했다는 응답이 38명(86.8%)으로 대부분이었으나, 24명(68.6%)이 보호구의 종류로서 면장갑을 착용한다고 하였으며, 그 외 고무장갑이나 비닐장갑을 이용했던 것으로 나타났다. 8. 피부염발생시 치료 여부에 대해 22명(51.1%)이 약국이나 병원을 이용하는 것으로 나타났으며, 개인위생에 신경 쓴다, 별 조치를 취하지 않는다, 사내의무실을 이용한다가 각각 11명(27.9%), 6명(14.0%), 3명(7.0%)로 대부분 자비를 부담하여 치료를 하는 것으로 나타났다. 9. 피부염의 발생에 대해 느끼는 정도를 묻는 질문에 대해 절삭유접촉군에서는 16명(47.1%)이 심각하다라는 응답을 하였으나, 방청유접촉군에서는 응답한 6명 모두가 별로 심각하지 않다라고 하여 대조를 보였다. 이상의 결과, 오일로 인한 사업장의 피부질환조사 시에는 접촉 수준(빈도와 양), 접촉물질의 종류를 정확히 파악하는 것이 중요하고, 적절한 조사시기(계절)가 고려되어야 하며, 접촉피부염의 예방을 위해서는 적절한 보호구와 보건교육이 필요하다는 것을 알 수 있었다. 또한 대규모 집단을 대상으로 접촉피부염의 유병률 특히, 기간유병률 등을 파악하는데 있어, 설문 조사가 주요한 도구가 될 수 있으므로, 이에 대한 연구가 필요하다고 생각된다.

  • PDF