• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.175-178
• /
• 2007

Valves has been used widely in various industries. There are many purposes for valve usage in a piping system. One of them is to control the flow rate. For a design of ball valves, it is important to know the characteristics of flows inside a ball valve. In this study, the computation fluid dynamics were conducted to observe flow velocity, flow coefficient and pressure distribution using CFX 10 according to the valve angles and uniform incoming velocity.

• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.6-12
• /
• 2009

This study performed an experiment for the danger of an electric shock in the human body, which is directly touched or approached to the exposure of buried metals in a leak caused by certain ground faults at a buried cable in street lamp. In the results of the experiment, the dangerous of electric shocks due to the earth specific resistance and wet and submersion of the earth surface represents a high level as the human body is directly touched to the buried metal at a leak point. In addition, it can be seen that the safety of the human body is influenced by the earth specific resistance, separated distance from buried metals, and shape of buried metals at around the leak point.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.3
• /
• pp.20-27
• /
• 2003

Compensation of probe radius is required for accurate measurement in metal working industry. Compensation involves correctly measuring data on the surface in the amount of radius of the touch probe with a Coordinate Measuring Machine (CMM). Mechanical parts with free-formed curves and surfaces are complex enough so that accurate measurement and compensation are indispensable. This paper presents necessary algorithms involved in the compensation of the probe radius for free-formed curves and surfaces. Application of pillar curve is the focus for the compensation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.42.1-42.1
• /
• 2018

정전용량방식 터치스크린패널은 모바일에서 차량용 디스플레이에 이르기까지 휴대용 전자장치를 위한 직관적인 사용자 인터페이스 덕분에 최근 몇 년간 관심이 집중 되었다. 본 연구에서는 우수한 성형성과 정확성 및 고감도 터치패널 제작을 위해 Ionized Physical Vapor Deposition (IPVD)시스템을 이용하여 멀티레이어(Oxide/Metal/Oxide)의 투명전극을 형성 하였다. 멀티레이어 전극은 5.1 ohm/sq의 면저항과 89.5%의 투과율을 나타내며, 높은 신뢰성 및 접촉력의 특성을 나타내는 것을 확인 하였다. 이를 통해, 기존의 패턴크기보다 작은 3.8mm pitch 패턴의 15인치 GFF타입 터치패널을 성공적으로 제작 하였으며, 터치센서는 우수한 선형성, 정확성 및 고감도 스타일러스펜 (직경=1mm)의 멀티터치를 구현 하였다.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.2
• /
• pp.137-154
• /
• 2000

The purpose of this study is to investigate the transition of luster material after the tweentieth century. This study was conducted by means of designer collection, journal of fashion, museum data, fabric exhibition and Internet data. The results of this study were as follows: Before the synthetic fiber period, the luster materials were used satin, chamuse, gauze, damask brocade and velvet, except cashmere, mohair and rayon. They are made from silk by the way of giving difference surface property. But since 1960s, it has used not only synthetic fiber with smooth surface but also vinyl, latex, natural leather, synthetic leather and metal. Luster material recently has a tendency to natural and soft shiny, example silket finish, chintz finish, silico coating finish with paper touch feel and so forth.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.162-170
• /
• 2001

In torch weaving in arc welding on V groove, the heat input distribution on groove surface is a main factor determining the bead shape and the weld quality with and without the weld defects such as undercut, overlap, etc. In this study, we calculate the heat input varying with the welding current, arc voltage, welding speed and the touch weaving condition using numerical method. And we investigate the heat input distribution on groove surface while applying the various grooves having 2 dimensional heat sources.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1553-1560
• /
• 2021

We have confirmed that optimized transmittance and surface resistance by electrospinning time, also the fabricated transparent electrode composed of silver nanofiber with excellent electrical, optical and mechanical performances is showed applicability to next generation flexible displays such as solar cells, displays, and touch screens. → We have confirmed the optimized transmittance and surface resistance by electrospinning time Also the fabricated transparent electrode composed of silver nanofiber with excellent electrical, optical and mechanical performances showed applicability to next generation flexible displays such as solar cells, displays, and touch screens.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.640-645
• /
• 2020

To produce an input device stably using the transparent electromagnetic pattern of an electromagnetic induction method, pattern inspection is required in advance in the production process. Various methods of inspecting the capacitive pattern for hand-touch have been proposed, but it is difficult to find the related technical data for the pattern inspection method of the transparent electromagnetic induction method. In this study, to develop an inspection system for a fused electromagnetic resonance pen sensor with a copper-etched metal mesh pattern, an inspection algorithm and method for measuring the antenna impedance inside the sensor was proposed by measuring only the exposed FPCB connector. The proposed method was configured as a control board consisting of a microprocessor that forms a loop between specific channels according to the command of a computer, a computer-controlled by the Windows program, an LCR meter measuring the impedance between specific channels, and transmitting the measurement results back to the computer. An evaluation of the proposed system and measurements of nine specimens showed that it could detect the defects of the sensor used in the actual product.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.2
• /
• pp.11-21
• /
• 2012

The purpose of this study is to understand of future image in fashion for 20C, to suggest a guideline's role in the development on fashion designs study. The methods of this study are used academic literatures as well as practical study. Futuristic image in fashion is to introduce about the future period, as fashion goes ahead times. Trends and formative characteristics of future image in 20C fashion are summarized as follows. First, futuristic images in fashion for 20C had emerged strongly futurism, space look, kinetic look, glitter look, techno look, cyber look. Second, perspectives on response for future society's changes are summarized as follows. Attitude of futuristic images of fashion, futurism, space look, kinetic look and glitter look, had been favorable about future society's changes until 1980. In 1990, techno look had been defensive and cyber look had been aggressive about future society's changes. Third, formative characteristics of future image in 20C fashion are studied shape, material, color, pattern. Shape was preferred linear and geometric form in the first half of the 20C, but body conscious type had appeared often in the second half of 20C. Material maintained the luster or the metal touch. Color was based image of colorless and preferred the gold, silver or color feels like metal. Pattern was preferred clarity with geometric type in the first half of the 20C. On the other hand in the second half of 20C pattern of future image was dominated by vague and abstract chaotic type.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.201-210
• /
• 1999

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric and thermal errors of the machine tools. Therefore, a key requirement for improving te machining accuracy and product quality is to reduce the geometric and thermal errors of machine tools. This study models geometric error for error analysis and develops on-machine measurement system by which the volumetric erors are measured. The geometric error is modeled using form shaping function(FSF) which is defined as the mathematical relationship between form shaping motion of machine tool and machined surface. The constant terms included in the error model are found from the measurement results of on-machine measurement system. The developed on-machine measurement system consists of the spherical ball artifact (SBA), the touch probe unit with a star type stylus, the thermal data logger and the personal computer. Experiments, performed with the developed measurement system, show that the system provides a high measuring accuracy, with repeatability of ${\pm}2{\mu}m$ in X, Y and Z directions.