• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.659-663
• /
• 2001

In Japan, the municipal solid waste, which amounts to 50 million tons, is generated every year and most of it is incinerated. The bottom and fly ashes are disposed to the registered disposal areas under the provisions of The Waste Disposal and Public Cleaning Law. Especially, as the fly ash from the municipal waste incineration (the primary fly ash) contains heavy metals (lead, zinc, etc) and dioxins, it cannot be disposed directly without decontamination, such as moiling, cementation, chelating and dissolving processes provided in the law. However, these procedures for decontamination, except melting, are not enough for dioxins. Even in case of melting, the fly ash from the process (the secondary fly ash) contains high concentration of heavy metals (e.g., Zn; 1-20%, Pb; 1-10%). For these reasons, Metal Mining Agency of Japan (MMAJ), a governmental organization, started a four-year project to develop the treatment technologies of these fly ashes in 1999. The purpose of the project is to establish the integrated technologies to recover the valuable metals from, and to decontaminate, the primary and secondary fly-ashes in the practical scale by utilizing the existing metallurgical processes and facilities, along with the energy saving and the reduction of the environmental impact.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.39-43
• /
• 2003

• 한국환경과학회지
• /
• 제12권2호
• /
• pp.227-236
• /
• 2003

Electrokinetic remediation technique offers the opportunity to extract heavy metals from soils with high plasticity. The experiment demonstrated the applicability of electrokinetic remediation on metal-mining deposit and the decision of the enhancement method for four kinds of bench-scale studies. According to the sequential extraction of heavy metals in the "I" mining deposit, Pb and Cu were mostly associated with residual fraction and Zn and Cd were associated with water soluble and residual fraction. Therefore, removable fractions by electrokinetic technology was determined by the sum of the fraction of water soluble and exchangeable, which is Cu : 19.53%, Pb : 1.42%, Cd : 52.82%, Zn : 57.28%, respectively. When considering electrical potential, volume of effluent, soil pH, and eliminated rate of contaminant, results determined by sum of each weight were Citric aic+SDS (13) > 0.1N $HNO_3$ (10) > HAc (8) > DDW (4). Therefore, citric acid and SDS mixed solution was determined the best enhancing agent for the remediation of metal mining deposit.g deposit.

• 자원리싸이클링
• /
• 제25권5호
• /
• pp.3-13
• /
• 2016

도시광산산업 통계는 도시광산산업을 체계적으로 육성하기 위해서 가장 기본적으로 필요한 자료이며 산업현황을 이해하는데 중요한 수단이다. 본 연구에서는 국가통계를 활용하는 Top-down 방식과 개별 기업현황 조사를 하는 Bottom-up 방식을 병행한 통계조사 방법을 통하여 도시광산 재자원화 규모 및 업체 현황을 조사하였다. 그 결과 도시광산 재자원화 규모는 19.6조 원으로 국내 금속수요의 약 22%를 도시광산에서 공급하고 있었다. 또한 도시광산 업체는 917개로 수도권과 경상권에 대다수 분포하고 있었으며, 약 58%의 업체가 10인 이하의 소기업으로 조사되었다. 2009년 도시광산 업체 현황 조사결과와 비교하였을 때, 도시광산 업체수는 전반적으로 증가하였고, 특히 희소금속 관련 기업 수의 증가 폭이 컸다. 본 연구는 기존의 간접적인 도시광산 통계 결과와 달리 실제 도시광산 업체에서 생산되는 금속자원 규모 및 관련 업체에 대한 통계자료를 산정하여 제시했다는 점에서 연구의 차별성 및 의의를 지닌다.

• 자원환경지질
• /
• 제28권3호
• /
• pp.231-241
• /
• 1995

It is well known that hydroxyapatite [$Ca_{10}(PO_4)_6(OH)_2$] have an exchangeability for various heavy metal ions in aqueous solution. To evalute the feasibility of employing the synthetic hydroxyapatites as an eliminatable exchanger for environmentally noxious caions in waste water, the adsorption properties, the removal capacities and the selectivity of the apatites for various cations were investigated in more detailed. The heavy metal cations have been exchanged in calcium part of hydroxyapatite. The order of the degree of amount exchanged of the investigated cations is $Pb^{2+}>Cd^{2+}>Zn^{2+}>Ba^{2+}$. The molar ratios between released $Cd^{2+}$ ions and remeved divalent metal cations in the reacted solution with hydroxyapatite are roughly close to an integer 1.0, suggesting that an ion-exchange reaction could have played a major role in the removal of heavy metals rather then an adsorption effect. The exchangeability of the hydroxyapatite powder of Ca/P molar ratio 1.67, which have specipic surface area of $104.5m^2g^{-1}$, appeared to be better then $237.6{\mu}g$ per g for $Pb^{2+}$ ions. The removal capacity of the heavy metal ions varies directly as particle size of hydroxyapatites. All evidences obtained indicate that the synthesized hydroxyapatite powders by precipitation reaction method can be employed as an effective cation exchanger for eliminating noxious ions in waste water even in some improvemental.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.139-147
• /
• 2023

The metal bush assembling process is a process of inserting and compressing a metal bush that serves to reduce the occurrence of noise and stable compression in the rotating section. In the metal bush assembly process, the head diameter defect and placement defect of the metal bush occur due to metal bush omission, non-pressing, and poor press-fitting. Among these causes of defects, it is intended to prevent defects due to omission of the metal bush by using signals from sensors attached to the facility. In particular, a metal bush omission is predicted through various data mining techniques using left load cell value, right load cell value, current, and voltage as independent variables. In the case of metal bush omission defect, it is difficult to get defect data, resulting in data imbalance. Data imbalance refers to a case where there is a large difference in the number of data belonging to each class, which can be a problem when performing classification prediction. In order to solve the problem caused by data imbalance, oversampling and composite sampling techniques were applied in this study. In addition, simulated annealing was applied for optimization of parameters related to sampling and hyper-parameters of data mining techniques used for bush omission prediction. In this study, the metal bush omission was predicted using the actual data of M manufacturing company, and the classification performance was examined. All applied techniques showed excellent results, and in particular, the proposed methods, the method of mixing Random Forest and SA, and the method of mixing MLP and SA, showed better results.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.759-760
• /
• 2006

Ti-6Al-4V has low specific gravity, high corrosion resistance and superior mechanical properties but it is very difficult to control oxygen content in MIM process. It is necessary to use powders with coarse particle size to decrease oxygen content of powders, so feedstocks with poor fluidity and sintered bodies with lower density are obtained in such cases. Fine titanium hydride-dehydride powders were blended with atomized powders to accomplish higher fluidity and sintered density. Sintered bodies had higher sintered density and mechanical properties equivalent to those of wrought materials by controlling oxygen content less than 0.35mass%.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권5호
• /
• pp.56-64
• /
• 2013

After the law has been enacted for the prevention and recovery of mining damage in 2005, efforts of remediation have been started to recover heavy metal contaminated soils in agricultural land near mining sites. As part of an effort, the upper part of cultivation layer has been treated through covering up with clean soil, but the heavy metal contamination could be still spreaded to the surrounding areas because heavy metals may be remained in the lower part of cultivation layers. In this study, the most frequently occurring arsenic (As) contamination was selected to study in agricultural land nearby an abandoned metal mining site. We applied separation technologies considering the differences in the physical characteristics of soil particles (particle size, density, magnetic properties, hydrophobicity, etc.). Based on physical and chemical properties of arsenic (As) containing particles in agricultural lands nearby mining sites, we applied sieve separation, specific gravity separation, magnetic separation, and flotation separation to remove arsenic (As)-containing particles in the contaminated soil. Results of this study show that the removal efficiency of arsenic (As) were higher in the order of the magnetic separation, flotation separation, specific gravity separation and sieve separation.

• 자원리싸이클링
• /
• 제8권5호
• /
• pp.3-10
• /
• 1999

• Mycobiology
• /
• 제44권4호
• /
• pp.277-282
• /
• 2016

In this study, we collected rhizosphere soils and root samples from a post-mining area and a natural forest area in Jecheon, Korea. We extracted spores of arbuscular mycorrhizal fungi (AMF) from rhizospheres, and then examined the sequences of 18S rDNA genes of the AMF from the collected roots of plants. We compared the AMF communities in the post-mining area and the natural forest area by sequence analysis of the AMF spores from soils and of the AMF clones from roots. Consequently, we confirmed that the structure of AMF communities varied between the post-mining area and the natural forest area and showed significant relationship with heavy metal contents in soils. These results suggest that heavy metal contamination by mining activity significantly affects the AMF community structure.