• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.20-22
• /
• 2002

Heavy metal level and distribution in sediments and bivalves from the tidal flats along the mid-western coast, Korea, were investigated. The averages of heavy metal concentrations in sediments from 5 sampling sites ranged from 86.35-187.77mg/kg for Mn, 13.25-17.73mg/kg for Zn, 6.80-11.85mg/kg for Cr, 4.28-6.25mg/kg for Ni, 1.85-3.09mg/kg for Cu, 0.004-0.020mg/kg for Cd and 5.70-10.41mg/kg for Pb, respectively. Among the mussels of the limited body size(8.5-11cm), heavy metal concentration both in the flesh and in the whole soft parts were not strongly related to the body size. It was shown that, in S. strictus, Cu moves fast into the flesh after absorption, but Pb and Fe move very slowly. Overally, the heavy metal concentration in the flesh tends to increase with that in the whole soft parts. The concentration factors(heavy metal concentration in S. strictus/heavy metal concentration in sediment) showed that, of the examined metals, Cd is the most cumulative in the body of S. strictus, followed by Zn and Cu, while Mn, Cr, Ni and Pb are not cumulative.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.123-135
• /
• 1997

In order to investigate the dispersion patterns and contamination level of heavy metals in the soil-ecosystem and to evaluate the efficiency of soil remediation by reversed soil method, soils and plants were collected from the Dongjin Au-Ag-Cu mine area and analysed for heavy metals. The dispersion patterns of heavy metals in soils and plants show that heavy metal pollutions caused by waste rump around Dongjin mine are mainly found in the vicinity of the waste rump and in the southward slanting of mine. Toxic metallic pollutants from the mine influence heavy metal contents in paddy soils in downstream area, and may be a potential sources of heavy metal pollution on crop plants. Soil samples collected from the remediated rice farming field by reversed method show similar levels of heavy metal content to those from the polluted rice farming field, but topsoil enrichment of heavy metals are not found. Heavy metal contents of the rice plants collected from remediated rice farming field are significantly lower than those from polluted rice farming field, and it suggests that the reversed soil method is effective for the reduction of bioavailability of heavy metals.

• Journal of Fashion Business
• /
• v.4 no.1
• /
• pp.25-32
• /
• 2000

The purpose of this study was to suggest the knowlege and scientific information of the damage according to the heavy metal exposure level of hair coloring manipulations. The study was investigated variations of the heavy metal contents(Pb, Zn, Cu, Mn, Fe, Ni) in hairdye and human hairs by 1 and 2 times of hair coloring manipulations. The results were as follows; 1. Mean heavy metal contents in colorant of hairdye were 0.250ppm(Pb), 33.650ppm(Zn), 0.800ppm(Cu), 0.675ppm(Mn), 31.050ppm(Fe), 1.700ppm(Ni). In oxidant of hairdye, It were 0.225ppm(Pb), 35.450ppm(Zn), 0.575ppm(Cu), 0.075ppm(Mn), 16.600ppm(Fe), 1.500ppm(Ni). 2. Mean heavy metal contents were 2.950ppm(Pb), 29.000ppm(Zn), 9.400ppm(Cu), 1.075ppm(Mn), 40.775ppm(Fe), 1.950ppm(Ni) in virgin hairs, 3.025ppm(Pb), 40.250ppm(Zn), 9.650ppm(Cu), 1.350ppm(Mn), 42.900ppm(Fe), 2.200ppm(Ni) in 1 time of coloring hairs, 3.350ppm(Pb), 51.650ppm(Zn), 10.950ppm(Cu), 1.475ppm(Mn), 44.350ppm(Fe), 2.225ppm(Ni) in 2 times of coloring hairs.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.113-120
• /
• 2015

Heavy metal ingredients of eyeliner product could cause side effect ranging from simple irritation, keratitis, corneal epithelium inflammation, eyelid dermatitis and dry eye symptoms have been reported. This study was conducted in order to prepare fundamental data for acceptable quality level heavy metal ingredients in the domestic and foreign cosmetic brand eyeliner products and to assess theirs the heavy metal concentrations. We measured the concentration of 5 heavy metals in 10 eyeliner products using ICP/MS-LC. According to the results, the average metal concentrations were as follows.; In case of domestic eyeliner products, 289.4 ppm for aluminium(Al), 304 ppm for manganese(Mn), 44 ppm for nickel(Ni), 0.58 ppm for arsenic(As) and 0.35 ppm for lead(Pb). In case of Foreign eyeliner products, 11337.8 ppm for aluminium(Al), 1678.8 ppm for manganese(Mn), 74.2 ppm for nickel(Ni), 1 ppm for arsenic(As) and 0.8 ppm for lead(Pb). Foreign products contained higher amounts of the two elements(Pb, As) compared to domestic ones. Also, greater concentrations of arsenic(As) were detected from waterproof products than non-waterproof ones. In conclusion, for safety reasons we suggested the amounts of heavy metals from the domestic and foreign eyeliner products. This finding will be helpful to provide the fundamental data which is standard of toxicological heavy metals acceptable on eyeliner products.

• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.266-274
• /
• 2019

Metal sealing is used to connecting the parts between valves and fuel pipes for a FCEV which utilizes hydrogen gas of 700 bar. Instead of general carbon steel, stainless steel is the primary material used to manufacture fuel pipes due to hydrogen embrittlement. The shape of deformation between metals is an important factor on the air-tightness of the metal to metal contact. Since the stainless steel pipe is hardened using the plastic forming during the tip shaping stage, this work hardening could have an effect on the deformed shape and characteristics of contact surfaces in fastening of pipes. In this paper, the deformation history of the pipe model was considered in order to analyze the hydrogen-tightness on the metal sealing part. The contact distance and the forward displacement for fastening were compared using experimental results and the simulation results. The simulation of the effect of material change on the fitting body demonstrated that the hardness or the strength of the formed tip of the pipe was designed to a proper valued level since the characteristics of the contact surface was exhibited better when the strength of the pipe was lower than that of the fitting body.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.397-400
• /
• 2007

For mapping the distribution of heavy metals in the mining area, field spectroscopy and hyperspectral remote sensing were used in this study. Although heavy metals are spectrally featureless from the visible to the short wave infrared range, possible variations in spectral signal due to heavy metals bound onto minerals can be explained with the metal binding reaction onto the mineral surface. Variations in the spectral absorption shapes of lattice OH and oxygen on the mineral surface due to the combination of heavy metals were surveyed over the range from 420 to 2400 nm. Spectral parameters such as peak ratio and peak area were derived and statistically linked to metal concentration levels in the streambed samples collected from the dry stream channels. The spatial relationships between spectral parameters and concentrations of heavy metals were yielded as well. Based on the observation at a ground level for the relationship between spectral signal and metal concentration levels, the spectral parameters were classified in a hyperspectral image and the spatial distribution patterns of classified pixels were compared with the product of analysis at the ground level. The degree of similarity between ground dataset and image dataset was statistically validated. These techniques are expected to support assessment of dispersion of heavy metal contamination and decision on optimal sampling point.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.3
• /
• pp.115-132
• /
• 2008

Metal industry is one of the most representative heavy industries and the median sales volume of steel and nonferrous metal companies is over one billion dollars in the case America [Forbes 2006]. As seen in the recent business market situation, an increasing number of industrial manufacturers and suppliers are moving from adversarial to cooperative exchange attitudes that support the long-term relationships with their customers. This article presents the results of an empirical study of the antecedent factors of business relationships in metal industry of the United States. Commitment has been reviewed as a significant and critical variable in research on inter-organizational relationships (Hong et al. 2007, Kim et al. 2007). The future stability of any buyer-seller relationship depends upon the commitment made by the interactants to their relationship. Commitment, according to Dwyer et al. [1987], refers to "an implicit or explicit pledge of relational continuity between exchange partners" and they consider commitment to be the most advanced phase of buyer-seller exchange relationship. Bonds are made because the members need their partners in order to do something and this integration on a task basis can be either symbiotic or cooperative (Svensson 2008). To the extent that members seek the same or mutually supporting ends, there will be strong bonds among them. In other words, the principle that affects the strength of bonds is 'economy of decision making' [Turner 1970]. These bonds provide an important idea to study the causes of business long-term relationships in a sense that organizations can be mutually bonded by a common interest in the economic matters. Recently, the framework of structural bonding has been used to study the buyer-seller relationships in industrial marketing [Han and Sung 2008, Williams et al. 1998, Wilson 1995] in that this structural bonding is a crucial part of the theoretical justification for distinguishing discrete transactions from ongoing long-term relationships. The major antecedent factors of buyer commitment such as technology, CLalt, transaction-specific assets, and importance were identified and explored from the perspective of structural bonding. Research hypotheses were developed and tested by using survey data from the middle managers in the metal industry. H1: Level of technology of the relationship partner is positively related to the level of structural bonding between the buyer and the seller. H2: Comparison level of alternatives is negatively related to the level of structural bonding between the buyer and the seller. H3: Amount of the transaction-specific assets is positively related to the level of structural bonding between the buyer and the seller. H4: Importance of the relationship partner is positively related to the level of structural bonding between the buyer and the seller. H5: Level of structural bonding is positively related to the level of commitment to the relationship. To examine the major antecedent factors of industrial buyer's structural bonding and long-term relationship, questionnaire was prepared, mailed out to the sample of 400 purchasing managers of the US metal industry (SIC codes 33 and 34). After a follow-up request, 139 informants returnedthe questionnaires, resulting in a response rate of 35 percent. 134 responses were used in the final analysis after dropping 5 incomplete questionnaires. All measures were analyzed for reliability and validity following the guidelines offered by Churchill [1979] and Anderson and Gerbing [1988]., the results of fitting the model to the data indicated that the hypothesized model provides a good fit to the data. Goodness-of-fit index (GFI = 0.94) and other indices ( chi-square = 78.02 with p-value = 0.13, Adjusted GFI = 0.90, Normed Fit Index = 0.92) indicated that a major proportion of variances and covariances in the data was accounted for by the model as a whole, and all the parameter estimates showed statistical significance as evidenced by large t-values. All the factor loadings were significantly different from zero. On these grounds we judged the hypothesized model to be a reasonable representation of the data. The results from the present study suggest several implications for buyer-seller relationships. Theoretically, we attempted to conceptualize the antecedent factors of buyer-seller long-term relationships from the perspective of structural bondingin metal industry. The four underlying determinants (i.e. technology, CLalt, transaction-specific assets, and importance) of structural bonding are very critical variables of buyer-seller long-term business relationships. Our model of structural bonding makes an attempt to systematically examine the relationship between the antecedent factors of structural bonding and long-term commitment. Managerially, this research provides industrial purchasing managers with a good framework to assess the interaction processes with their partners and, ability to position their business relationships from the perspective of structural bonding. In other words, based on those underlying variables, industrial purchasing managers can determine the strength of the company's relationships with the key suppliers and its state of preparation to be a successful partner with those suppliers. Both the supplying and customer companies can also benefit by using the concept of 'structural bonding' and evaluating their relationships with key business partners from the structural point of view. In general, the results indicate that structural bonding gives a critical impact on the level of relationship commitment. Managerial implications and limitations of the study are also discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.133-133
• /
• 1998

In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K ａ(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.

• Journal of Wetlands Research
• /
• v.12 no.3
• /
• pp.15-20
• /
• 2010

The contamination loadings generated in Changwon City are coming into Masan Bay through the Bongam tidal flat except the loadings collected and transferred by sewer lines to the wastewater treatment plant. The recovery of waterbirds, shellfishes, and fishes has been quite well recognized in recent years after the first implementation of Masan Bay TPLM (Total Pollution Loads Management) in Korea. This tidal flat has been conserved by the cooperation of several stakeholders and utilized as an ecosystem field site for in situ education. A large industrial complex has been operated since 1970's, therefore increasing the level of pollutants in estuary and costal sediments, especially by heavy metals. Zinc, copper, and lesd contamination of sediment was revealed at higher level by Clean-up guideline (MOMAF) or heavily polluted level by SQC (USEPA). There was a significant difference between two sites at the 95% confidence level, which implies no homogeneity in the processes of transport and deposition even at 500 m of distance. The heavy metal concentrations in the Bongam sediments have been gradually decreased with comparing the data of 2006, and 2009.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.337-344
• /
• 2012

Purpose: This study examined the corrosion level by alloy type and pH, and used the corrosion levels as the dental health data. The study utilized one Ni-Cr alloy for the full and removable partial denture metal frameworks and two Ni-Cr alloys for porcelain-fused-to-metal crown, among the non-beryllium dental casting non-precious Ni-Cr alloys. Methods: The alloy specimens were manufactured in $10cm^2$ and stored in the corrosive solution(pH 2.2-4.4) in the electrical water bath($37^{\circ}C$) for seven days. Afterwards, the metal ions were quantitatively analyzed using the ICP. Results: Of the three metal alloys, Bellabond-Plus$^{(R)}$alloy and SOLIBOND N$^{(R)}$alloy, with 22% or higher chrome chemical contents, had higher corrosion resistance than Jdium-100$^{(R)}$alloy with 20% chrome chemical content. In all three alloys, the corrosion of Ni was highest, and metal ion corrosion was higher in the pH 2.2 corrosive solution. Conclusion: Although Ni-Cr alloy was not very corrosive, a Ni-allergic patient should not have Ni-Cr alloy prosthesis. The Ni-Cr alloy for porcelain-fused-to-metal crown should be designed for the dental porcelain to cover the whole crown.